BERG14-TO-MICTOR38: 14-Pin Berg to 38-Pin Mictor adapter 

Designed for the following architectures:

• NXP Qorivva PowerPC Nexus MPC55xx/56xx/57xx
• ST SPC5

Designed to work with:

• Multilink Universal 
• Multilink Universal FX 
• Cyclone_LC Universal
• Cyclone_FX_Universal
• CAB_RIBBON_14-PIN

CABLE-CF-ADAPTER:

Note: The previous version of the adapter integrated a ribbon cable. The current version does not integrate the ribbon cable, it should be provided by the user.

Synchronized debug communication signals are required for a few of the older ColdFire devices. This 26-pin synchronous adapter has integrated electronics to synchronize the ColdFire debug communication signals to the PSTCLK signal generated from a ColdFire target. The legacy USB-ML-CFE Multilink does not require this adapter cable as it inherently includes both synchronous and asynchronous circuitry. 

Designed for the following devices:

• NXP ColdFire MCF5272 
• NXP ColdFire MCF5206(E) 

Designed to work with:

• Multilink Universal 
• Multilink Universal FX 
• Cyclone_LC Universal
• Cyclone_FX_Universal
• CAB_RIBBON_26-PIN

CU-CUFX-STM8-ADPT: 

The Renesas Adapter for Cyclone FX Universal allows the user to program supported Renesas devices using the Cyclone Universal FX programmer. The adapter plugs into Port C and Port E of the Cyclone and connects to the target via a 14-pin ribbon cable (included with the Cyclone FX Universal). View the Cyclone FX user manual for more detailed information. Our support page shows lists of supported Renesas devices.

NOTE: This adapter is NOT required for ARM-based Renesas devices that PEmicro supports, such as Synergy S5/S7 and RA series. See our Renesas Support page for a list of supported Renesas families.  

Users who are transitioning from the Cyclone for Renesas to the Cyclone FX Universal may wish to read this blog post about the newer, more advanced technology that the Cyclone FX Universal offers. The newer Cyclone is a more versatile, powerful tool which helps make the programming process more efficient. 

Designed for the following architectures:

• Renesas H8 and H8S/Tiny, MC16C and M16C80, M32C, R8C, RH850, RL78, RX600 

Designed to work with:

• Cyclone_FX_Universal
• CAB_RIBBON_14-PIN

ML-MLFX-RS08-ADPT:

PEmicro's newest Multilink Universal debug probe (part# USB-ML-UNIVERSAL, Rev. E or later) requires this RS08 adapter to allow the user to communicate with NXP's RS08 devices. 

The RS08 connection otherwise remains the same, and uses the same 6-pin pinout described in the Multilink Universal technical summary.

RS08 Adapter for Multilink Universal Rev. E

The part number and revision of the Multilink are located on the underside label of the Multilink.

As shown in the figure above, the adapter connects to the 16-pin header (Port E) of the Multilink Universal. The adapter then offers a 6-pin header for connection to the target via ribbon cable.

Designed for the following architectures:

• NXP RS08

Designed to work with:

• USB-ML-UNIVERSAL, Rev. E or later
• CAB_RIBBON_6-PIN