PKG Software Packages

PEmicro software package, typically includes debugger, programmer, IDE, register file editor.

See additional pricing details & add-ons

PKG-HL-PPCNEXUS   $849  
PKG-HL-CFZ   $649  
PKG-HL-PPCZ   $599  
PKG-HL-12Z   $549  
PKG-HL-16Z   $499  
PKG-HL-CFV1   $499  
PKG-HL-32Z   $495  
PKG-HL-HCS08   $399  
PKG-HL-RS08   $399  

Overview

PKG software packages bundle together PEmicro's software tools for a specific target device architecture. This typically includes an IDE, PROG programmer, ICD debugger, and REG register editor software. PROG and ICD can also be purchased individually. The IDE software is free to download. This software works with PEmicro's Multilink debug probes and Cyclone programmers. If you are looking for support/documentation for a specific software tool, please check the product page for that tool.

These packages contain software only, a separate, compatible hardware interface is required to communicate with the target device.

Software Communicates to Target via Compatible Interface

Hardware-Based License

The license that activates PKG software will reside on a Multilink debug probe or Cyclone programmer. The user who activates the software will choose a Multilink or Cyclone on which to permanently install the license. The allows that interface to work with PKG on any machine where a supported version of the software is installed. 

Check our PKG Licensing blog post to see which part numbers/Revisions of Multilink and Cyclone are supported.

WinIDE - Integrated Editor/Assembler Environment

Allows you to run external programs - including assemblers, C-compilers, debuggers, and flash programmers - in one environment, with a single hotkey for each. WinIDE comes installed with PEmicro's CASM32 assembler.

Editor features include:

  • Fully Reconfigurable
  • Allows execution of external programs
  • On-screen help
  • Assembler features include:
  • Macro support
  • S19, HEX, IEEE695 objects
  • Conditional assembly
  • Include files
  • Full listing control

PROG - Flash Programmer

Allows you to program/reprogram both internal and external flash devices in-circuit, for a specific MCU architecture. The programmer software communicates with the processor's Background Debug Mode module via any of PEmicro's compatible Multilink debug probes or Cyclone programmers (available separately). 

Programmer features include:

  • Program
  • Verify
  • Blank check
  • Upload
  • Display
  • Erase

and typically many more, depending on the specific architecture. 

PROG software is also available on its own.

ICD - In-Circuit Debugger

A powerful tool for debugging code for a specific target architecture. It uses the processor's debug mode via one of PEmicro's hardware interfaces to give the user access to all on-chip resources. 

ICD is a great tool for creating repeatable testing, calibration, and debugging procedures.

ICD software is also available on its own.

REG - Register File Viewer/Editor

Adds symbolic bit field debugging of registers for devices of a specific MCU architecture. The current register file is read from the device and displayed symbolically and numerically, then the modified value is written back to the device.

Features:

  • View and edit the registers and register bits
  • Shows "Read Only," "Write Only," and "Not Implemented" bits of microcontroller registers
  • Create your own register files for any memory-mapped peripherals


System Requirements

Windows 7/8/10: 32-bit (x86) or 64-bit (x64)
Windows 11: 64-bit (x64)
Jump to: Documentation / Manuals   Downloads   FAQs   Version info & Release Notes
Documentation / Manuals
No Documentation available
Downloads
No Downloads available
FAQs
When using the multilink with your software tools, I get an error $8882 when it attempts to firmware update every time. This setup used to work with older multilink but not with the new multilink. What is going on?
I launched the command-line CPROGxx flash programmer, saw a window flicker up, and then disappear. How do I know what happened?
I am using a C compiler and the PEmicro debugger. What type of debug file format will the PEmicro debugger accept?
The connection assistant dialog indicates that my Multilink or Cyclone is undetected even though I have connected the hardware to my USB port. What should I do?
Where and how do I get the latest version of PEmicro's software, algorithms, utilities, or plug-ins?
How do I activate my PEmicro software?
Why do I see the Power Dialog warning when trying to debug or flash program my chip in PROG, ICD, UNIT, or 3rd party software like Codewarrior? How can I prevent this from happening?
Version Info & Release Notes>
Product
Version
PKGPPCNEXUS_SW
N/A
Release Notes:
PKGPPCNEXUS v7.59.00.00
19 September 2019
- Algo fix on SPC56xPxx
- Algo fix on SPC58EC60
- Algo fix on MPC574xP
- Support for Disabling Fast memory Reads. Useful for UTEST memory reads
########################################################
PKGPPCNEXUS v6.94.00.00
26 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

###################################################
PKGPPCNEXUS v6.22.00.00
27 December 2016
- Pipelined Algorithms for PPCNEXUS targets

PROGPPCNEXUS  6.22.00.00
CPROGPPCNEXUS 6.22.00.00
ICDPPCNEXUS   6.22.00.00

###################################################

PKGPPCNEXUS STARTER v6.9.00.00
11 October 2016
- Adds support for MPC5748G cut 3
- Support for 256-bit censorship password

PROGPPCNEXUS  6.9.00.00
CPROGPPCNEXUS 6.9.00.00
ICDPPCNEXUS   6.9.00.00

###################################################

PKGPPCNEXUS v5.93.00.00
16 June 2016
- New device support for S32R274, SPC582B60, SPC58EC80, SPC570S50, SPC574K72
- Adds support for SPC58NE83 cut 2.0
- Adds support for SPC564B64 cut 2.0
- Auto-attempt default censorship password of factory-censored MPC5775K cut 2.0+

PROGPPCNEXUS  5.93.00.00
CPROGPPCNEXUS 5.93.00.00
ICDPPCNEXUS   5.93.00.00

###################################################
PKGPPCNEXUS v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROGPPCNEXUS  5.74.00.00
CPROGPPCNEXUS 5.74.00.00
ICDPPCNEXUS   5.74.00.00

###################################################


PKGPPCNEXUS 
Freescale MPC55XX/56XX/57XX and ST SPC56xx/57xx/58xx Qorivva Development Package
(C)opyright 2015, PEmicro.
Visit us at http://www.pemicro.com

PKGPPCNEXUS v5.60.0.0
25 September 2015
- Fixes MPC5517 settings
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 5.60.00.00
CPROGPPCNEXUS 5.60.00.00
ICDPPCNEXUS 5.60.00.00

#########################################################
PKGPPCNEXUS v5.57.0.0
2 September 2015
- Cyclone Max firmware 7.90
- Multilink Universal firmware 9.40
- Multilink Universal FX firmware 9.40
- Improved debugging when viewing unimplemented/reserved memory
- Includes Reset Escalation dialog
- Improved hotsync capabilities for multi-core 57xx devices
- Includes capability to scan for any valid rchw address to start debug
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 5.57.00.00
CPROGPPCNEXUS 5.57.00.00
ICDPPCNEXUS 5.57.00.00

#########################################################
PKGPPCNEXUS v5.39.0.0
20 May 2015
 - Supports Real-time variables for devices with Nexus class 1 or higher.
- Adds support for SPC58NE/EG84 and SPC58EM80
 - Speed up flash programming for MPC5601 and MPC5602P/B/D devices
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 5.37.00.00
CPROGPPCNEXUS 5.37.00.00
ICDPPCNEXUS 5.39.00.00

#########################################################

PKGPPCNEXUS v5.16.0.0
6 January 2015
- Adds support for USB Multilink UNIVERSAL Rev. C
- Adds support for USB Multilink UNIVERSAL FX Rev. B
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 5.13.02.00
CPROGPPCNEXUS 5.13.02.00
ICDPPCNEXUS 5.16.00.00

#########################################################
PKGPPCNEXUS v5.12.0.0
18 August 2014
- Adds automatic firmware update for USB-ML-UNIVERSAL Rev. B
- Adds support for MPC5748G cut 2.0
- Adds support for MPC5746C
- PROG: Clarifies error message when debug shift speed is too fast
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 5.12.00.00
CPROGPPCNEXUS 5.12.00.00
ICDPPCNEXUS 5.12.00.00

PKGPPCNEXUS v3.22
28 April 2014
- ICDPPCNEXUS (v3.22): Hotsync now works correctly and no longer resets the processor
- ICDPPCNEXUS (v3.22): Fixes incorrect access to core 2 for MPC5744K
- ICDPPCNEXUS (v3.22): Adds missing MPC5777M startup script file
- ICDPPCNEXUS (v3.22): Fixes access to core z7_1 for MPC5777M processors
- ICDPPCNEXUS (v3.22): Removes "Privileged Instruction" popup in Windows 7
- Adds MPC5746R cut 2 support
- Adds MPC5777C support
- Adds MPC5775K cut 2 support
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 3.24.00.00
CPROGPPCNEXUS 3.24.00.00
ICDPPCNEXUS 3.22.00.00

*********************************************************
PKGPPCNEXUS v3.06 b131115
15 November 2013
- CPROGPPCNEXUS (v3.10): Adds uncensor support
- PROGPPCNEXUS (v3.10): Fixes user function asking for unnecessary parameters
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 3.10.00.00
CPROGPPCNEXUS 3.10.00.00
ICDPPCNEXUS 3.06.00.03

PKGPPCNEXUS v3.06
4 September 2013
- ELF/DWARF file loading fix: Occasionally the type of an array was not being properly interpreted leading to improper display in the variables window.
- Added "eye" icon next to variables which may be "examined" in the variables window
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 3.07
CPROGPPCNEXUS 3.07
ICDPPCNEXUS 3.06

PKGPPCNEXUS v3.04
30 August 2013
- Updated register files for MPC5775x and MPC5744P
- Fixed serial file programming in PROG
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 3.07
CPROGPPCNEXUS 3.07
ICDPPCNEXUS 3.04

20 August 2013
---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

PROGPPCNEXUS 3.05
CPROGPPCNEXUS 3.05
ICDPPCNEXUS 3.04

---- May include the one of following PEmicro hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX
CYCLONE MAX

PKGPPCNEXUS includes the following GNU software components:

GCC version 3.4.4
Binutils version 2.15.91
Newlib version 1.13.0

---- Software Release Notes ----

PROGPPCNEXUS v3.05
- Fixed an issue with starter edition limitations incorrectly affecting full versions.
- Added support for MPC5746R emulation devices

ICDPPCNEXUS v3.04
- Fixed an issue with starter edition limitations incorrectly affecting full versions.
- Added support for MPC5746R emulation devices

*********************************************************
PKGPPCNEXUS v3.03
31 July 2013
---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

PROGPPCNEXUS 3.04
CPROGPPCNEXUS 3.04
ICDPPCNEXUS 3.03

---- May include the one of following PEmicro hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX
CYCLONE MAX

PKGPPCNEXUS includes the following GNU software components:

GCC version 3.4.4
Binutils version 2.15.91
Newlib version 1.13.0

---- Software Release Notes ----

ICDPPCNEXUS v3.03
- Adds support for MPC5746R
- Adds support for MPC5748G
- Updates Flash programming algorithms for MPC5775x
- Updates DFlash programming algorithm for MPC5744P cut 2.0
- Adds 64-bit GPR support for MPC5775x

*********************************************************
PKGPPCNEXUS v1.41.00.05
22 February 2013

---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

PROGPPCNEXUS 1.47
CPROGPPCNEXUS 1.47
ICDPPCNEXUS 1.41.00.05

---- May include the one of following PEmicro hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX
CYCLONE MAX

PKGPPCNEXUS includes the following GNU software components:

GCC version 3.4.4
Binutils version 2.15.91
Newlib version 1.13.0

---- Software Release Notes ----

ICDPPCNEXUS v1.41.00.05
Adds the following:
-Support for new Freescale devices: MPC5746M, MPC5744P, MPC5744K, MPC5777M, QUASAR2, MPC5775x, SPC56xL70
-Adds uncensor support for MPC564xA, MPC5674F, MPC5645S

*********************************************************
PKGPPCNEXUS v1.36.00.00
19 July 2012

---- The following changes have been made for this release:

Adds the following template:
None

Updates the following documentation:
cprogppc_nexus.doc
Debugging with C and ELFDWARF

Adds the following files:
5601P register files
5602P register files
5603P register files
5604B register files
5604E register files
5604P register files
5606B register files
5643L register files
5646B register files
5674F register files
5676R register files

This release supports Windows 7/XP/Vista 32/64 bit as well as Windows 2000/XP 32-bit

---- Includes WinIDE 2.35.

---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

PROGPPCNEXUS 1.42.00.01
CPROGPPCNEXUS 1.42.00.01
ICDPPCNEXUS 1.36.00.00

---- May include the one of following PEmicro hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX
CYCLONE MAX

PKGPPCNEXUS includes the following GNU software components:

GCC version 3.4.4
Binutils version 2.15.91
Newlib version 1.13.0

---- Software Release Notes ----

ICDPPCNEXUS v1.36
-Fixed an issue where a memory allocation error would occur if an ELF file was very large
-Adds support for Freescale MPC5642A

ICDPPCNEXUS v1.35
-Adds support for Multilink Universal FX (USB-ML-UNIVERSAL-FX) development tool
-Support for new Freescale devices: MPC5676R, MPC5604E, MPC5606B

*********************************************************
PKGPPCNEXUS v1.30
21 April 2011

ICDPPCNEXUS: 
  1.30 adds the following:
-Support for new Freescale devices: MPC5645S, MPC567xK, MPC5602B/C, MPC5602P, MPC564xB
-Adds OSJTAG connection option
-Adds uncensor support for MPC56xx devices

PROGPPCNEXUS:
  1.38 adds the following:
-Support for new Freescale devices: MPC5645S, MPC567xK, MPC5602B/C, MPC5602P, MPC564xB
-Adds OSJTAG connection option
-Adds uncensor support for MPC56xx devices

*********************************************************

PKGPPCNEXUS v1.22
02 March 2009

---- The following changes have been made for this release:

Adds the following templates:
none

Updates the following templates:
none

Adds the following documentation:
none

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt

Removes the following documentation:
none

Adds the files:
pkgppcnexusmpc5668_booke.mac
pkgppcnexusmpc5668_vle.mac
pkgppcnexusmpc5674F_booke.mac
pkgppcnexusmpc5674F_vle.mac

Updates the files:
pkgppcnexusmpc5500_booke.mac
pkgppcnexusmpc5500_vle.mac
pkgppcnexusmpc5516_booke.mac
pkgppcnexusmpc5516_vle.mac
pkgppcnexusmpc5600_z0h_vle.mac
pkgppcnexusmpc5633m_booke.mac
pkgppcnexusmpc5633m_vle.mac

Removes the files:
none

---- Includes WinIDE 2.32.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS: 
  1.22 adds support for MPC5674F and MPC5668
  1.14 adds the following:
       Support for dumping the processor's SPR and MMU contents to the 
         status window
       Adds a new command which allows writing to the Nexus registers - 
         syntax is "writenexusreg [opcode] [data]"
       Adds a new command which allows reading of the Nexus registers - 
         syntax is "readnexusreg [opcode]"
       ICDPPCNEXUS will no longer allow the programming of the MPC55xx shadow 
         block
  1.10 adds support for assembling VLE instructions
  1.05 adds support for dual-core MPC5516.
  1.04 adds disassembly display of VLE instructions.
PROGPPCNEXUS
  1.27 adds support for MPC5674F and MPC5668
  1.14 provides a warning to the user if a shadow block algorithm is selected
  1.07 adds support for MPC5516
CPROGPPCNEXUS
  1.27 adds support for MPC5674F and MPC5668
  1.07 adds support for MPC5516
REGPPCNEXUS

---- The retail package includes one of the following PEmicro hardware 
interfaces:

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

The GNU software supports the following cores in non-VLE mode:
e200z6
e200z3
e200z1

*********************************************************

PKGPPCNEXUS v1.14a
04 February 2008

---- The following changes have been made for this release:

Adds the following templates:
none

Updates the following templates:
none

Adds the following documentation:
none

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt

Removes the following documentation:
none

Adds the files:
none

Updates the files:
pkgppcnexusWinIde.ini

Removes the files:
none

---- Includes WinIDE 2.32.
The following changes have been made to WinIDE since 2.31:

Internal changes only.

---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

ICDPPCNEXUS: 
  1.14 adds the following:
       Support for dumping the processor's SPR and MMU  
         contents to the status window
       Adds a new command which allows writing to the 
         Nexus registers - syntax is "writenexusreg 
         [opcode] [data]"
       Adds a new command which allows reading of the 
         Nexus registers - syntax is "readnexusreg 
         [opcode]"
       ICDPPCNEXUS will no longer allow the programming of 
         the MPC55xx shadow block
  1.10 adds support for assembling VLE instructions
  1.05 adds support for dual-core MPC5516.
  1.04 adds disassembly display of VLE instructions.
PROGPPCNEXUS
  1.14 provides a warning to the user if a shadow block 
         algorithm is selected
  1.07 adds support for MPC5516
CPROGPPCNEXUS
  1.07 adds support for MPC5516
REGPPCNEXUS

---- The retail package includes one of the following PEmicro hardware interfaces:

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities,  
  MingWin version
Newlib 1.13.0:  Redhat C target library

The GNU software supports the following cores in non-VLE mode:
e200z6
e200z3
e200z1

*********************************************************

PKGPPCNEXUS v1.14
25 January 2008

---- The following changes have been made for this release:

Adds the following templates:
pkgppcnexus	emplatesEVB_FREESCALE_MPC5533EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5533EVB_SRAM
pkgppcnexus	emplatesEVB_FREESCALE_MPC5561EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5561EVB_SRAM
pkgppcnexus	emplatesEVB_FREESCALE_MPC5565EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5565EVB_SRAM
pkgppcnexus	emplatesEVB_FREESCALE_MPC5566EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5566EVB_SRAM

Updates the following templates:
All previous templates include updated files from Freescale's v1.12 target header files.  The following 
templates have been renamed as well as updated:
pkgppcnexus	emplatesEVB_AXIOM_MPC5534EVB
pkgppcnexus	emplatesEVB_AXIOM_MPC5534EVB_SRAM
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAM
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAM
pkgppcnexus	emplatesEVB_AXIOM_MPC5567EVB
pkgppcnexus	emplatesEVB_AXIOM_MPC5567EVB_SRAM
Respectively, these templates are now named
pkgppcnexus	emplatesEVB_FREESCALE_MPC5534EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5534EVB_SRAM
pkgppcnexus	emplatesEVB_FREESCALE_MPC5553EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5553EVB_SRAM
pkgppcnexus	emplatesEVB_FREESCALE_MPC5554EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5554EVB_SRAM
pkgppcnexus	emplatesEVB_FREESCALE_MPC5567EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5567EVB_SRAM

Adds the following documentation:
pkgppcnexusQuick Start Guide MPC5534EVB.pdf
pkgppcnexusQuick Start Guide MPC5554EVB.pdf

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt
pkgppcnexusQuick Start Guide MPC5516.pdf
pkgppcnexusQuick Start Guide MPC5567EVB.pdf
pkgppcnexusQuick Start Guide PHYCOREMPC5554.pdf
pkgppcnexusReadMe_pkgPPCnexus.txt

Removes the following documentation:
pkgppcnexusQuick Start Guide MPC5553DEMO MPC5554DEMO.pdf

Adds the files:


Updates the files:
pkgppcnexusmpc5500_any_init.mac
pkgppcnexusmpc5500_booke.mac
pkgppcnexusmpc5500_vle.mac

Removes the files:
pkgppcnexusCW_5516_DUAL
pkgppcnexusDebugging with CW 21.pdf
pkgppcnexusMPC5500_spr_dump.mac

---- Includes WinIDE 2.31.
The following changes have been made to WinIDE since 2.29:

Internal changes only.

---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

ICDPPCNEXUS: 
  1.14 adds the following:
       Support for dumping the processor's SPR and MMU  
         contents to the status window
       Adds a new command which allows writing to the 
         Nexus registers - syntax is "writenexusreg 
         [opcode] [data]"
       Adds a new command which allows reading of the 
         Nexus registers - syntax is "readnexusreg 
         [opcode]"
       ICDPPCNEXUS will no longer allow the programming of 
         the MPC55xx shadow block
  1.10 adds support for assembling VLE instructions
  1.05 adds support for dual-core MPC5516.
  1.04 adds disassembly display of VLE instructions.
PROGPPCNEXUS
  1.14 provides a warning to the user if a shadow block  
         algorithm is selected
  1.07 adds support for MPC5516
CPROGPPCNEXUS
  1.07 adds support for MPC5516
REGPPCNEXUS

---- The retail package includes one of the following PEmicro hardware 
interfaces:

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, 
  MingWin version
Newlib 1.13.0:  Redhat C target library

The GNU software supports the following cores in non-VLE mode:
e200z6
e200z3
e200z1

*********************************************************

PKGPPCNEXUS v1.09a
PKGPPCNEXUS-USB v1.09a

30 July 2007

---- The following changes have been made for this release:

Adds the following templates:
none

Adds the following documentation:
none

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt

Removes the following documentation:
none

Adds the files:
none

Updates the files:
none

Removes the files:
none

---- Includes WinIDE 2.29.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS: 
  1.04 adds disassembly display of VLE instructions.
  1.05 adds support for dual-core MPC5516.
PROGPPCNEXUS
  1.07 adds support for MPC5516
CPROGPPCNEXUS
  1.07 adds support for MPC5516
REGPPCNEXUS
  Adds support for MPC5516

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

The GNU software supports the following cores in non-VLE mode:
e200z6
e200z3
e200z1

*********************************************************

PKGPPCNEXUS v1.09
PKGPPCNEXUS-USB v1.09

9 July 2007

---- The following changes have been made for this release:

Adds the following templates:
none

Adds the following documentation:
none

Updates the following documentation:
pkgppcnexusDebugging with CW 21.pdf
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt
pkgppcnexusQuick Start Guide MPC5516.pdf

Removes the following documentation:
none

Adds the files:
none

Updates the files:
none

Removes the files:
none

---- Includes WinIDE 2.29.
The following changes have been made to WinIDE since 2.28a:

For GNU powerpc-eabispe, adds option to surround batch file path
with double-quotes.


---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS: 
  1.04 adds disassembly display of VLE instructions.
  1.05 adds support for dual-core MPC5516.
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS
  Adds support for MPC5516

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

The GNU software supports the following cores in non-VLE mode:
e200z6
e200z3
e200z1

*********************************************************

PKGPPCNEXUS v1.08 BETA
PKGPPCNEXUS-USB v1.08 BETA

25 June 2007

---- BETA Release Limitations

PROGPPCNEXUS does not support MPC551x.

GNU toolchain support e200z6/z3/z1 cores in non-VLE mode.

---- The following changes have been made for this release:

Adds the following templates:
pkgppcnexus	emplatesMPC5516_MINIMAL_FLASH*
pkgppcnexus	emplatesMPC5516_MINIMAL_SRAM*

Adds the following documentation:
pkgppcnexusDebugging with CW 21.pdf
pkgppcnexusQuick Start Guide MPC5516.pdf

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt
pkgppcnexusICDPPCNEXUS_PRO.HLP

Removes the following documentation:
none

Adds the files:
pkgppcnexusmpc5516_booke.mac
pkgppcnexusmpc5516_vle.mac
pkgppcnexusCW_5516_DUAL*

Updates the files:
pkgppcnexusmpc5500_any_init.mac

Removes the files:
none

---- Includes WinIDE 2.28a.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS: 
  1.04 adds disassembly display of VLE instructions.
  1.05 adds support for dual-core MPC5516.
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS
  Adds support for MPC5516

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

The GNU software supports the following cores in non-VLE mode:
e200z6
e200z3
e200z1

*********************************************************

PKGPPCNEXUS v1.07
PKGPPCNEXUS-USB v1.07

22 April 2007

---- The following changes have been made for this release:

Updates the following documentation:
pkgppcnexusICDPPCNEXUS_PRO.HLP
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt
pkgppcnexusReadMe_pkgPPCnexus.txt

---- Includes WinIDE 2.28a.  The following changes have been made to WinIDE since 
2.28:

Auto-replace Removed
Removes legacy Auto-replace feature.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS - version 1.04 adds disassembly display of VLE instructions.
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.06a
PKGPPCNEXUS-USB v1.06a

31 October 2006

---- The following changes have been made for this release:

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt

---- Includes WinIDE 2.28.  The following changes have been made to WinIDE since 
2.27a:

Auto-migrate Project Settings
Adds this functionality to the compiler GNU m68k-elf.

WinIDE's "Additional Options Passed to GCC"
Updates behavior with this edit box, located in the Environment Menu->Assembler/Compiler 
tab.  For compiler GNU powerpc-eabispe, WinIDE will convert paths of template project 
subdirectories "src" and "headers" to DOS short path style.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.06
PKGPPCNEXUS-USB v1.06

13 September 2006

---- The following changes have been made for this release:

Adds the following templates:
pkgppcnexus	emplatesEVB_AXIOM_MPC5534EVB
pkgppcnexus	emplatesEVB_AXIOM_MPC5534EVB_SRAM
pkgppcnexus	emplatesEVB_AXIOM_MPC5567EVB
pkgppcnexus	emplatesEVB_AXIOM_MPC5567EVB_SRAM
pkgppcnexus	emplatesMPC5534_MINIMAL_FLASH
pkgppcnexus	emplatesMPC5534_MINIMAL_SRAM
pkgppcnexus	emplatesMPC5567_MINIMAL_FLASH
pkgppcnexus	emplatesMPC5567_MINIMAL_SRAM

Adds the following documentation:
pkgppcnexusDebugging with C and ELFDWARF.html
pkgppcnexusQuick Start Guide MPC5567EVB.pdf

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt
pkgppcnexusApplication Framework And Solutions Guide.pdf
pkgppcnexusQuick Start Guide MPC5553DEMO MPC5554DEMO.pdf
pkgppcnexusQuick Start Guide PHYCOREMPC5554.pdf
pkgppcnexusUser's Manual.pdf
pkgppcnexusReadMe_pkgPPCnexus.txt (Starter Edition only)

Removes the following documentation:
pkgppcnexusBuilding GNU for PowerPC EABI SPE.pdf (Starter Edition only)

Adds the file:
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcpe_crt0_MPC55xx_minimal_flash.s
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcpe_crt0_MPC55Xx_minimal_SRAM.s
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcpe_crt0_MPC55Xx_minimal_flash.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcpe_crt0_MPC55Xx_minimal_flash.s

Removes the file:
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcpe_crt0_MPC555x_minimal_flash.s
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcpe_crt0_MPC555x_minimal_SRAM.s
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcpe_crt0_MPC555x_minimal_flash.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcpe_crt0_MPC555x_minimal_flash.s

Source code comments have changed in the following files:
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOPEGnupe_MPC5553.ld
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrc\__start.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcintc_sw_handlers.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcIntcIsrVectors.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcmain.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcmpc5500_ccdcfg.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcmpc5500_demo.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcmpc5500_xcptn.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMPEGnupe_MPC5553.ld
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrc\__start.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcintc_sw_handlers.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcIntcIsrVectors.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcmain.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcmpc5500_ccdcfg.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcmpc5500_demo.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcmpc5500_xcptn.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOPEGnupe_MPC5553.ld
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOsrc\__start.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOsrcintc_sw_handlers.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOsrcIntcIsrVectors.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOsrcmain.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMPEGnupe_MPC5553.ld
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMsrc\__start.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMsrcintc_sw_handlers.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMsrcIntcIsrVectors.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesEVB_PHYTEC_PHYCOREMPC5554PEGnupe_MPC5554.ld
pkgppcnexus	emplatesEVB_PHYTEC_PHYCOREMPC5554_SRAMPEGnupe_MPC5554_SRAM.ld
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHPEGnupe_MPC5553.ld
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrc\__start.s
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcintc_sw_handlers.s
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcIntcIsrVectors.c
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcmain.c
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcmpc5500_ccdcfg.c
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcmpc5500_demo.c
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcmpc5500_xcptn.c
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMPEGnupe_MPC5553.ld
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrc\__start.s
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcintc_sw_handlers.s
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcIntcIsrVectors.c
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcmain.c
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcmpc5500_ccdcfg.c
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcmpc5500_demo.c
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcmpc5500_xcptn.c
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHPEGnupe_MPC5553.ld
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrc\__start.s
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcintc_sw_handlers.s
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcIntcIsrVectors.c
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcmain.c
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMPEGnupe_MPC5553.ld
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrc\__start.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcintc_sw_handlers.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcIntcIsrVectors.c
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcmain.c
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcmpc5500_ccdcfg.c
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcmpc5500_demo.c
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcmpc5500_xcptn.c

---- Includes WinIDE 2.27a.  The following changes have been made to WinIDE since 
2.26:

Auto-migrate Project Settings
After creating a new project from a template, you may move the project folder to a 
new location. WinIDE will attempt to detect new path settings.

PowerPC-EABISPE GNU Assembler Listing
When creating a listing file with this compiler, new build flags are used in order
to avoid unexpected behavior with the GNU assembler.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.05
PKGPPCNEXUS-USB v1.05

9 May 2006

---- The following changes have been made for this release:

Adds the following documentation:
pkgppcnexusQuick Start Guide MPC5553DEMO MPC5554DEMO.pdf
pkgppcnexusQuick Start Guide PHYCOREMPC5554.pdf

Updates the following documentation:
pkgppcnexusApplication Framework And Solutions Guide.pdf
pkgppcnexusUser's Manual.pdf

Removes the following documentation:
pkgppcnexusQuick Start Guide.pdf

Adds the file: 
pkgppcnexusMPC5500_spr_dump.mac

Adds the following templates:
pkgppcnexus	emplatesEVB_PHYTEC_PHYCOREMPC5554 
pkgppcnexus	emplatesEVB_PHYTEC_PHYCOREMPC5554_SRAM

---- Includes WinIDE 2.26.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.04
PKGPPCNEXUS-USB v1.04

6 March 2006

---- The following changes have been made for this release:

Adds the following documentation:
pkgppcnexusgnugpl.txt
pkgppcnexusApplication Framework And Solutions Guide.pdf
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt

Updates the following documentation:
pkgppcnexusQuick Start Guide.pdf
pkgppcnexusReadMe_pkgPPCnexus.txt
pkgppcnexusUser's Manual.pdf

Adds the following templates:
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASH
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAM
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASH
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAM

In the remaining templates, the following files have been changed:

PEGnuReadMe.txt
Updates documentation.

---- Includes WinIDE 2.26.  The following changes have been made to WinIDE since 
2.22:

Initial Window Size of New Template Projects
Corrects size of windows when opening a new template project.

Default Browse Directory
After opening a new project, WinIDE sets current Windows directory to the path 
of the project file.  After creating a new project from template, WinIDE sets 
current Windows directory to the path of the new project file.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.03
PKGPPCNEXUS-USB v1.03

10 February 2006

---- The following changes have been made for this release:

Updates the following documentation
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt
pkgppcnexusQuick Start Guide.pdf
pkgppcnexusUser's Manual.pdf

---- Includes WinIDE 2.22.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library


*********************************************************

PKGPPCNEXUS v1.02
PKGPPCNEXUS-USB v1.02

22 December 2005

---- The following changes have been made for this release:

Adds the following files:
pkgppcnexusmpc5500_any_init.mac
pkgppcnexusMPC5500_ebi_16.mac
pkgppcnexusMPC5500_ebi_32.mac
pkgppcnexusPKGPPCNEXUS_102_ReleaseNotes.txt

Removes the following files:
pkgppcnexusmpc5554_rev01_init.mac
pkgppcnexusmpc5554_rev0_init.mac

Updates the following documents:
pkgppcnexusQuick Start Guide.pdf
pkgppcnexusUser's Manual.pdf

Adds the following templates:
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAM
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAM

The remaining templates include the following file changes:

headers
eadme.txt
Adds file.

headers
eadme012.txt
Removes file.

headers
eadme07.txt
Removes file.

PEGnu*.ppf
Updates file names contained in PEmicro project file.

PEGnumpc5500_any_init.mac
Adds file.

PEGnuMPC5500_ebi_16.mac
Adds file.

PEGnuMPC5500_ebi_32.mac
Adds file.

PEGnumpc5554_rev01_init.mac
Removes file.

PEGnumpc5554_rev0_init.mac
Removes file.

PEGnu*.ld
Updates file.  Changes size of memory sections.  Updates code comments.

---- Includes WinIDE 2.22.  The following changes have been made to WinIDE since 
2.21:

GNU Batch Files
Adds command to change current host drive.

GNU Project Wizard
Improves error checking of path for target directory.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.01
PKGPPCNEXUS-USB v1.01

09 November 2005

---- The following changes have been made for this release:

pkgppcnexusExecAndGetStdErr_ReadMe.txt
pkgppcnexusExecAndGetStdErr_ReadMe.exe
Updates utility version to 1.02, which enables NULL token input and allows 
redirection of standard output.

pkgppcnexusReadMe_pkgPPCnexus.ppf
pkgppcnexusReadMe_pkgPPCnexus.txt
Adds a default project file that simply opens ReadMe_pkgPPCnexus.txt, which 
outlines available documentation.

pkgppcnexuswait_for_file_to_be_available.exe
Adds utility to batch file execution.

The following templates have been added:
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO

The following documentation has been added:
pkgppcnexusBuilding GNU for PowerPC EABI SPE.pdf
pkgppcnexusICDPPCNEXUS.HLP
pkgppcnexusQuick Start Guide.pdf
pkgppcnexusUser's Manual.pdf
pkgppcnexuswinide2.hlp

The following files have been added:
pkgppcnexusmpc5554_rev01_init.mac
pkgppcnexusmpc5554_rev0_init.mac

The following files have been removed:
pkgMPC5554zMPC5554_project.ppf
pkgMPC5554zMPC5554_Welcome.doc

The following folders have been removed:
pkgMPC5554zexample
pkgMPC5554zpkgppcz

---- Includes WinIDE 2.21.  The following changes have been made to WinIDE since 
2.07b:

Source Code Error Clearing
When a source code error is marked in a non-active window, WinIDE properly 
resets status bar when a key is pressed.  WinIDE leaves the error mark in the 
non-active child.

Improved Relative Path Support with Project Files

Project Templates
A new menu option provides a means to create a user GNU project from a PEmicro 
template folder.  A template must be fully contained within one folder.

GNU Readelf
Integrates the GNU Readelf utility into the GNU compiler settings.

Error Checks with GNU Compiler Options
WinIDE error checks for blank entries in crucial GNU compiler options.

Cancel Button in GNU Compiler Forms
Provides multiple levels of cancel for GNU compiler forms.

Default Parser Syntax
Sets default parser syntax for unknown file types.

Template Wizard
Adds a redesigned form to allow the user to select destination directory for new 
project.  User may add or delete directories from within the Wizard.

Long Path Names
Adds support for files whose path is greater than 80 characters.

DOS Short Path Names
Provides DOS path names to GNU batch file build script.  This eliminates GNU 
restrictions on path size and space characters in paths.

PEmicro Assembler Templates
Adds support for template projects that use the PEmicro Assembler instead of the GNU 
compiler.

Template Wizard
Prevent user from resizing select directory form. 

DOS Short Path Names
For GNU main input file, the file name format is preserved while its path is 
still translated to DOS short format.

PowerPC EABI SPE Compiler
Adds support for the GNU powerpc-eabispe compiler.

GNU Build Dialog
Adds a new dialog that provides greater control over the application build 
process.

Environment Settings Form Appearance
Disallows user from resizing Environment Settings forms.

GNU Path Error Checking
Adds additional error checking for GNU configuration paths.

Additional GNU Compiler Option
Enables support for the option to compile without linking.

File Synchronization Errors
Adds code to prevent various file synchronization errors when compiling with the 
GNU compiler.

GNU Error Checking
Checks length of command line passed to GCC.

WinIDE Template Settings
When creating a GNU project from a WinIDE template, the user is given the root 
directory of the compiler.

Windows PATH Variable in Batch File Build Script
Temporarily resets the value of Windows PATH variable in batch file build 
script.

PEmicro Syntax Parser
Adds tokens to the syntax highlighting parser for the PEmicro assembler.

Wizard Changes
When using templates, forces default destination directory to be the 
installation directory, rather than the desktop.

PEmicro CASMxx_Pro Assembler
Adds support for the new PEmicro Pro assembler.

PEmicro CASMxxZ Assembler
Updates name of assembler within WinIDE.  Adds mechanism for the user to pass 
command-line arguments directly to the assembler.

GNU Compiler Dialogs
To accommodate various screen sizes, changes border style of GNU dialogs to 
allow the user to resize.

Template Wizard
Improves error checking for location of user compiler.

WinIDE Parser
Adds keywords to PEmicro assembly parser

PEmicro RCASMWxx Assembler
Removes support for this assembler.

Dialog Screen Position
Places GNU compiler dialogs in center of screen.

GNU Relative Path Information
Properly interprets compiler path information that contains the double dot 
notation.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.00
PKGPPCNEXUS-USB v1.00

25 July 2004

Initial BETA release of product.

---- Includes WinIDE 2.07b.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.
ICDPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 2.95.3:  GNU C compiler
Binutils 2.10:  GNU binary utilities
Newlib 1.9.0:  Redhat C target library

*********************************************************
PKG-HL-PPCNEXUS
8.98
Release Notes:
##################################################
PKGPPCNEXUS v8.98
11 Nov 2022
-Native support for USB ML Universal FX Rev D
-Native support for USB ML Universal Rev E

##################################################
PKGPPCNEXUS v8.62
Sept 17 2021
- Fixes licensing issue of some multilinks

####################################################
PKGPPCNEXUS v8.54
09 August 2021
-Support for Hardware license
-Updated multilink and cyclone firmware
-Updated PDF documentations

##################################################
PKGPPCNEXUS v7.59.00.00
19 September 2019
- Algo fix on SPC56xPxx
- Algo fix on SPC58EC60
- Algo fix on MPC574xP
- Support for Disabling Fast memory Reads. Useful for UTEST memory reads
########################################################
PKGPPCNEXUS v6.94.00.00
26 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

###################################################
PKGPPCNEXUS v6.22.00.00
27 December 2016
- Pipelined Algorithms for PPCNEXUS targets

PROGPPCNEXUS  6.22.00.00
CPROGPPCNEXUS 6.22.00.00
ICDPPCNEXUS   6.22.00.00

###################################################

PKGPPCNEXUS STARTER v6.9.00.00
11 October 2016
- Adds support for MPC5748G cut 3
- Support for 256-bit censorship password

PROGPPCNEXUS  6.9.00.00
CPROGPPCNEXUS 6.9.00.00
ICDPPCNEXUS   6.9.00.00

###################################################

PKGPPCNEXUS v5.93.00.00
16 June 2016
- New device support for S32R274, SPC582B60, SPC58EC80, SPC570S50, SPC574K72
- Adds support for SPC58NE83 cut 2.0
- Adds support for SPC564B64 cut 2.0
- Auto-attempt default censorship password of factory-censored MPC5775K cut 2.0+

PROGPPCNEXUS  5.93.00.00
CPROGPPCNEXUS 5.93.00.00
ICDPPCNEXUS   5.93.00.00

###################################################
PKGPPCNEXUS v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROGPPCNEXUS  5.74.00.00
CPROGPPCNEXUS 5.74.00.00
ICDPPCNEXUS   5.74.00.00

###################################################


PKGPPCNEXUS 
Freescale MPC55XX/56XX/57XX and ST SPC56xx/57xx/58xx Qorivva Development Package
(C)opyright 2015, PEmicro.
Visit us at http://www.pemicro.com

PKGPPCNEXUS v5.60.0.0
25 September 2015
- Fixes MPC5517 settings
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 5.60.00.00
CPROGPPCNEXUS 5.60.00.00
ICDPPCNEXUS 5.60.00.00

#########################################################
PKGPPCNEXUS v5.57.0.0
2 September 2015
- Cyclone Max firmware 7.90
- Multilink Universal firmware 9.40
- Multilink Universal FX firmware 9.40
- Improved debugging when viewing unimplemented/reserved memory
- Includes Reset Escalation dialog
- Improved hotsync capabilities for multi-core 57xx devices
- Includes capability to scan for any valid rchw address to start debug
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 5.57.00.00
CPROGPPCNEXUS 5.57.00.00
ICDPPCNEXUS 5.57.00.00

#########################################################
PKGPPCNEXUS v5.39.0.0
20 May 2015
 - Supports Real-time variables for devices with Nexus class 1 or higher.
- Adds support for SPC58NE/EG84 and SPC58EM80
 - Speed up flash programming for MPC5601 and MPC5602P/B/D devices
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 5.37.00.00
CPROGPPCNEXUS 5.37.00.00
ICDPPCNEXUS 5.39.00.00

#########################################################

PKGPPCNEXUS v5.16.0.0
6 January 2015
- Adds support for USB Multilink UNIVERSAL Rev. C
- Adds support for USB Multilink UNIVERSAL FX Rev. B
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 5.13.02.00
CPROGPPCNEXUS 5.13.02.00
ICDPPCNEXUS 5.16.00.00

#########################################################
PKGPPCNEXUS v5.12.0.0
18 August 2014
- Adds automatic firmware update for USB-ML-UNIVERSAL Rev. B
- Adds support for MPC5748G cut 2.0
- Adds support for MPC5746C
- PROG: Clarifies error message when debug shift speed is too fast
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 5.12.00.00
CPROGPPCNEXUS 5.12.00.00
ICDPPCNEXUS 5.12.00.00

PKGPPCNEXUS v3.22
28 April 2014
- ICDPPCNEXUS (v3.22): Hotsync now works correctly and no longer resets the processor
- ICDPPCNEXUS (v3.22): Fixes incorrect access to core 2 for MPC5744K
- ICDPPCNEXUS (v3.22): Adds missing MPC5777M startup script file
- ICDPPCNEXUS (v3.22): Fixes access to core z7_1 for MPC5777M processors
- ICDPPCNEXUS (v3.22): Removes "Privileged Instruction" popup in Windows 7
- Adds MPC5746R cut 2 support
- Adds MPC5777C support
- Adds MPC5775K cut 2 support
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 3.24.00.00
CPROGPPCNEXUS 3.24.00.00
ICDPPCNEXUS 3.22.00.00

*********************************************************
PKGPPCNEXUS v3.06 b131115
15 November 2013
- CPROGPPCNEXUS (v3.10): Adds uncensor support
- PROGPPCNEXUS (v3.10): Fixes user function asking for unnecessary parameters
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 3.10.00.00
CPROGPPCNEXUS 3.10.00.00
ICDPPCNEXUS 3.06.00.03

PKGPPCNEXUS v3.06
4 September 2013
- ELF/DWARF file loading fix: Occasionally the type of an array was not being properly interpreted leading to improper display in the variables window.
- Added "eye" icon next to variables which may be "examined" in the variables window
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 3.07
CPROGPPCNEXUS 3.07
ICDPPCNEXUS 3.06

PKGPPCNEXUS v3.04
30 August 2013
- Updated register files for MPC5775x and MPC5744P
- Fixed serial file programming in PROG
- The version numbers of the PEmicro software are the latest versions available at the time of release:
PROGPPCNEXUS 3.07
CPROGPPCNEXUS 3.07
ICDPPCNEXUS 3.04

20 August 2013
---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

PROGPPCNEXUS 3.05
CPROGPPCNEXUS 3.05
ICDPPCNEXUS 3.04

---- May include the one of following PEmicro hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX
CYCLONE MAX

PKGPPCNEXUS includes the following GNU software components:

GCC version 3.4.4
Binutils version 2.15.91
Newlib version 1.13.0

---- Software Release Notes ----

PROGPPCNEXUS v3.05
- Fixed an issue with starter edition limitations incorrectly affecting full versions.
- Added support for MPC5746R emulation devices

ICDPPCNEXUS v3.04
- Fixed an issue with starter edition limitations incorrectly affecting full versions.
- Added support for MPC5746R emulation devices

*********************************************************
PKGPPCNEXUS v3.03
31 July 2013
---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

PROGPPCNEXUS 3.04
CPROGPPCNEXUS 3.04
ICDPPCNEXUS 3.03

---- May include the one of following PEmicro hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX
CYCLONE MAX

PKGPPCNEXUS includes the following GNU software components:

GCC version 3.4.4
Binutils version 2.15.91
Newlib version 1.13.0

---- Software Release Notes ----

ICDPPCNEXUS v3.03
- Adds support for MPC5746R
- Adds support for MPC5748G
- Updates Flash programming algorithms for MPC5775x
- Updates DFlash programming algorithm for MPC5744P cut 2.0
- Adds 64-bit GPR support for MPC5775x

*********************************************************
PKGPPCNEXUS v1.41.00.05
22 February 2013

---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

PROGPPCNEXUS 1.47
CPROGPPCNEXUS 1.47
ICDPPCNEXUS 1.41.00.05

---- May include the one of following PEmicro hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX
CYCLONE MAX

PKGPPCNEXUS includes the following GNU software components:

GCC version 3.4.4
Binutils version 2.15.91
Newlib version 1.13.0

---- Software Release Notes ----

ICDPPCNEXUS v1.41.00.05
Adds the following:
-Support for new Freescale devices: MPC5746M, MPC5744P, MPC5744K, MPC5777M, QUASAR2, MPC5775x, SPC56xL70
-Adds uncensor support for MPC564xA, MPC5674F, MPC5645S

*********************************************************
PKGPPCNEXUS v1.36.00.00
19 July 2012

---- The following changes have been made for this release:

Adds the following template:
None

Updates the following documentation:
cprogppc_nexus.doc
Debugging with C and ELFDWARF

Adds the following files:
5601P register files
5602P register files
5603P register files
5604B register files
5604E register files
5604P register files
5606B register files
5643L register files
5646B register files
5674F register files
5676R register files

This release supports Windows 7/XP/Vista 32/64 bit as well as Windows 2000/XP 32-bit

---- Includes WinIDE 2.35.

---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

PROGPPCNEXUS 1.42.00.01
CPROGPPCNEXUS 1.42.00.01
ICDPPCNEXUS 1.36.00.00

---- May include the one of following PEmicro hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX
CYCLONE MAX

PKGPPCNEXUS includes the following GNU software components:

GCC version 3.4.4
Binutils version 2.15.91
Newlib version 1.13.0

---- Software Release Notes ----

ICDPPCNEXUS v1.36
-Fixed an issue where a memory allocation error would occur if an ELF file was very large
-Adds support for Freescale MPC5642A

ICDPPCNEXUS v1.35
-Adds support for Multilink Universal FX (USB-ML-UNIVERSAL-FX) development tool
-Support for new Freescale devices: MPC5676R, MPC5604E, MPC5606B

*********************************************************
PKGPPCNEXUS v1.30
21 April 2011

ICDPPCNEXUS: 
  1.30 adds the following:
-Support for new Freescale devices: MPC5645S, MPC567xK, MPC5602B/C, MPC5602P, MPC564xB
-Adds OSJTAG connection option
-Adds uncensor support for MPC56xx devices

PROGPPCNEXUS:
  1.38 adds the following:
-Support for new Freescale devices: MPC5645S, MPC567xK, MPC5602B/C, MPC5602P, MPC564xB
-Adds OSJTAG connection option
-Adds uncensor support for MPC56xx devices

*********************************************************

PKGPPCNEXUS v1.22
02 March 2009

---- The following changes have been made for this release:

Adds the following templates:
none

Updates the following templates:
none

Adds the following documentation:
none

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt

Removes the following documentation:
none

Adds the files:
pkgppcnexusmpc5668_booke.mac
pkgppcnexusmpc5668_vle.mac
pkgppcnexusmpc5674F_booke.mac
pkgppcnexusmpc5674F_vle.mac

Updates the files:
pkgppcnexusmpc5500_booke.mac
pkgppcnexusmpc5500_vle.mac
pkgppcnexusmpc5516_booke.mac
pkgppcnexusmpc5516_vle.mac
pkgppcnexusmpc5600_z0h_vle.mac
pkgppcnexusmpc5633m_booke.mac
pkgppcnexusmpc5633m_vle.mac

Removes the files:
none

---- Includes WinIDE 2.32.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS: 
  1.22 adds support for MPC5674F and MPC5668
  1.14 adds the following:
       Support for dumping the processor's SPR and MMU contents to the 
         status window
       Adds a new command which allows writing to the Nexus registers - 
         syntax is "writenexusreg [opcode] [data]"
       Adds a new command which allows reading of the Nexus registers - 
         syntax is "readnexusreg [opcode]"
       ICDPPCNEXUS will no longer allow the programming of the MPC55xx shadow 
         block
  1.10 adds support for assembling VLE instructions
  1.05 adds support for dual-core MPC5516.
  1.04 adds disassembly display of VLE instructions.
PROGPPCNEXUS
  1.27 adds support for MPC5674F and MPC5668
  1.14 provides a warning to the user if a shadow block algorithm is selected
  1.07 adds support for MPC5516
CPROGPPCNEXUS
  1.27 adds support for MPC5674F and MPC5668
  1.07 adds support for MPC5516
REGPPCNEXUS

---- The retail package includes one of the following PEmicro hardware 
interfaces:

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

The GNU software supports the following cores in non-VLE mode:
e200z6
e200z3
e200z1

*********************************************************

PKGPPCNEXUS v1.14a
04 February 2008

---- The following changes have been made for this release:

Adds the following templates:
none

Updates the following templates:
none

Adds the following documentation:
none

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt

Removes the following documentation:
none

Adds the files:
none

Updates the files:
pkgppcnexusWinIde.ini

Removes the files:
none

---- Includes WinIDE 2.32.
The following changes have been made to WinIDE since 2.31:

Internal changes only.

---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

ICDPPCNEXUS: 
  1.14 adds the following:
       Support for dumping the processor's SPR and MMU  
         contents to the status window
       Adds a new command which allows writing to the 
         Nexus registers - syntax is "writenexusreg 
         [opcode] [data]"
       Adds a new command which allows reading of the 
         Nexus registers - syntax is "readnexusreg 
         [opcode]"
       ICDPPCNEXUS will no longer allow the programming of 
         the MPC55xx shadow block
  1.10 adds support for assembling VLE instructions
  1.05 adds support for dual-core MPC5516.
  1.04 adds disassembly display of VLE instructions.
PROGPPCNEXUS
  1.14 provides a warning to the user if a shadow block 
         algorithm is selected
  1.07 adds support for MPC5516
CPROGPPCNEXUS
  1.07 adds support for MPC5516
REGPPCNEXUS

---- The retail package includes one of the following PEmicro hardware interfaces:

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities,  
  MingWin version
Newlib 1.13.0:  Redhat C target library

The GNU software supports the following cores in non-VLE mode:
e200z6
e200z3
e200z1

*********************************************************

PKGPPCNEXUS v1.14
25 January 2008

---- The following changes have been made for this release:

Adds the following templates:
pkgppcnexus	emplatesEVB_FREESCALE_MPC5533EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5533EVB_SRAM
pkgppcnexus	emplatesEVB_FREESCALE_MPC5561EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5561EVB_SRAM
pkgppcnexus	emplatesEVB_FREESCALE_MPC5565EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5565EVB_SRAM
pkgppcnexus	emplatesEVB_FREESCALE_MPC5566EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5566EVB_SRAM

Updates the following templates:
All previous templates include updated files from Freescale's v1.12 target header files.  The following 
templates have been renamed as well as updated:
pkgppcnexus	emplatesEVB_AXIOM_MPC5534EVB
pkgppcnexus	emplatesEVB_AXIOM_MPC5534EVB_SRAM
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAM
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAM
pkgppcnexus	emplatesEVB_AXIOM_MPC5567EVB
pkgppcnexus	emplatesEVB_AXIOM_MPC5567EVB_SRAM
Respectively, these templates are now named
pkgppcnexus	emplatesEVB_FREESCALE_MPC5534EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5534EVB_SRAM
pkgppcnexus	emplatesEVB_FREESCALE_MPC5553EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5553EVB_SRAM
pkgppcnexus	emplatesEVB_FREESCALE_MPC5554EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5554EVB_SRAM
pkgppcnexus	emplatesEVB_FREESCALE_MPC5567EVB
pkgppcnexus	emplatesEVB_FREESCALE_MPC5567EVB_SRAM

Adds the following documentation:
pkgppcnexusQuick Start Guide MPC5534EVB.pdf
pkgppcnexusQuick Start Guide MPC5554EVB.pdf

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt
pkgppcnexusQuick Start Guide MPC5516.pdf
pkgppcnexusQuick Start Guide MPC5567EVB.pdf
pkgppcnexusQuick Start Guide PHYCOREMPC5554.pdf
pkgppcnexusReadMe_pkgPPCnexus.txt

Removes the following documentation:
pkgppcnexusQuick Start Guide MPC5553DEMO MPC5554DEMO.pdf

Adds the files:


Updates the files:
pkgppcnexusmpc5500_any_init.mac
pkgppcnexusmpc5500_booke.mac
pkgppcnexusmpc5500_vle.mac

Removes the files:
pkgppcnexusCW_5516_DUAL
pkgppcnexusDebugging with CW 21.pdf
pkgppcnexusMPC5500_spr_dump.mac

---- Includes WinIDE 2.31.
The following changes have been made to WinIDE since 2.29:

Internal changes only.

---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

ICDPPCNEXUS: 
  1.14 adds the following:
       Support for dumping the processor's SPR and MMU  
         contents to the status window
       Adds a new command which allows writing to the 
         Nexus registers - syntax is "writenexusreg 
         [opcode] [data]"
       Adds a new command which allows reading of the 
         Nexus registers - syntax is "readnexusreg 
         [opcode]"
       ICDPPCNEXUS will no longer allow the programming of 
         the MPC55xx shadow block
  1.10 adds support for assembling VLE instructions
  1.05 adds support for dual-core MPC5516.
  1.04 adds disassembly display of VLE instructions.
PROGPPCNEXUS
  1.14 provides a warning to the user if a shadow block  
         algorithm is selected
  1.07 adds support for MPC5516
CPROGPPCNEXUS
  1.07 adds support for MPC5516
REGPPCNEXUS

---- The retail package includes one of the following PEmicro hardware 
interfaces:

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, 
  MingWin version
Newlib 1.13.0:  Redhat C target library

The GNU software supports the following cores in non-VLE mode:
e200z6
e200z3
e200z1

*********************************************************

PKGPPCNEXUS v1.09a
PKGPPCNEXUS-USB v1.09a

30 July 2007

---- The following changes have been made for this release:

Adds the following templates:
none

Adds the following documentation:
none

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt

Removes the following documentation:
none

Adds the files:
none

Updates the files:
none

Removes the files:
none

---- Includes WinIDE 2.29.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS: 
  1.04 adds disassembly display of VLE instructions.
  1.05 adds support for dual-core MPC5516.
PROGPPCNEXUS
  1.07 adds support for MPC5516
CPROGPPCNEXUS
  1.07 adds support for MPC5516
REGPPCNEXUS
  Adds support for MPC5516

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

The GNU software supports the following cores in non-VLE mode:
e200z6
e200z3
e200z1

*********************************************************

PKGPPCNEXUS v1.09
PKGPPCNEXUS-USB v1.09

9 July 2007

---- The following changes have been made for this release:

Adds the following templates:
none

Adds the following documentation:
none

Updates the following documentation:
pkgppcnexusDebugging with CW 21.pdf
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt
pkgppcnexusQuick Start Guide MPC5516.pdf

Removes the following documentation:
none

Adds the files:
none

Updates the files:
none

Removes the files:
none

---- Includes WinIDE 2.29.
The following changes have been made to WinIDE since 2.28a:

For GNU powerpc-eabispe, adds option to surround batch file path
with double-quotes.


---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS: 
  1.04 adds disassembly display of VLE instructions.
  1.05 adds support for dual-core MPC5516.
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS
  Adds support for MPC5516

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

The GNU software supports the following cores in non-VLE mode:
e200z6
e200z3
e200z1

*********************************************************

PKGPPCNEXUS v1.08 BETA
PKGPPCNEXUS-USB v1.08 BETA

25 June 2007

---- BETA Release Limitations

PROGPPCNEXUS does not support MPC551x.

GNU toolchain support e200z6/z3/z1 cores in non-VLE mode.

---- The following changes have been made for this release:

Adds the following templates:
pkgppcnexus	emplatesMPC5516_MINIMAL_FLASH*
pkgppcnexus	emplatesMPC5516_MINIMAL_SRAM*

Adds the following documentation:
pkgppcnexusDebugging with CW 21.pdf
pkgppcnexusQuick Start Guide MPC5516.pdf

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt
pkgppcnexusICDPPCNEXUS_PRO.HLP

Removes the following documentation:
none

Adds the files:
pkgppcnexusmpc5516_booke.mac
pkgppcnexusmpc5516_vle.mac
pkgppcnexusCW_5516_DUAL*

Updates the files:
pkgppcnexusmpc5500_any_init.mac

Removes the files:
none

---- Includes WinIDE 2.28a.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS: 
  1.04 adds disassembly display of VLE instructions.
  1.05 adds support for dual-core MPC5516.
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS
  Adds support for MPC5516

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

The GNU software supports the following cores in non-VLE mode:
e200z6
e200z3
e200z1

*********************************************************

PKGPPCNEXUS v1.07
PKGPPCNEXUS-USB v1.07

22 April 2007

---- The following changes have been made for this release:

Updates the following documentation:
pkgppcnexusICDPPCNEXUS_PRO.HLP
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt
pkgppcnexusReadMe_pkgPPCnexus.txt

---- Includes WinIDE 2.28a.  The following changes have been made to WinIDE since 
2.28:

Auto-replace Removed
Removes legacy Auto-replace feature.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS - version 1.04 adds disassembly display of VLE instructions.
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS
CYCLONE MAX

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.06a
PKGPPCNEXUS-USB v1.06a

31 October 2006

---- The following changes have been made for this release:

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt

---- Includes WinIDE 2.28.  The following changes have been made to WinIDE since 
2.27a:

Auto-migrate Project Settings
Adds this functionality to the compiler GNU m68k-elf.

WinIDE's "Additional Options Passed to GCC"
Updates behavior with this edit box, located in the Environment Menu->Assembler/Compiler 
tab.  For compiler GNU powerpc-eabispe, WinIDE will convert paths of template project 
subdirectories "src" and "headers" to DOS short path style.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.06
PKGPPCNEXUS-USB v1.06

13 September 2006

---- The following changes have been made for this release:

Adds the following templates:
pkgppcnexus	emplatesEVB_AXIOM_MPC5534EVB
pkgppcnexus	emplatesEVB_AXIOM_MPC5534EVB_SRAM
pkgppcnexus	emplatesEVB_AXIOM_MPC5567EVB
pkgppcnexus	emplatesEVB_AXIOM_MPC5567EVB_SRAM
pkgppcnexus	emplatesMPC5534_MINIMAL_FLASH
pkgppcnexus	emplatesMPC5534_MINIMAL_SRAM
pkgppcnexus	emplatesMPC5567_MINIMAL_FLASH
pkgppcnexus	emplatesMPC5567_MINIMAL_SRAM

Adds the following documentation:
pkgppcnexusDebugging with C and ELFDWARF.html
pkgppcnexusQuick Start Guide MPC5567EVB.pdf

Updates the following documentation:
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt
pkgppcnexusApplication Framework And Solutions Guide.pdf
pkgppcnexusQuick Start Guide MPC5553DEMO MPC5554DEMO.pdf
pkgppcnexusQuick Start Guide PHYCOREMPC5554.pdf
pkgppcnexusUser's Manual.pdf
pkgppcnexusReadMe_pkgPPCnexus.txt (Starter Edition only)

Removes the following documentation:
pkgppcnexusBuilding GNU for PowerPC EABI SPE.pdf (Starter Edition only)

Adds the file:
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcpe_crt0_MPC55xx_minimal_flash.s
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcpe_crt0_MPC55Xx_minimal_SRAM.s
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcpe_crt0_MPC55Xx_minimal_flash.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcpe_crt0_MPC55Xx_minimal_flash.s

Removes the file:
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcpe_crt0_MPC555x_minimal_flash.s
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcpe_crt0_MPC555x_minimal_SRAM.s
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcpe_crt0_MPC555x_minimal_flash.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcpe_crt0_MPC555x_minimal_flash.s

Source code comments have changed in the following files:
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOPEGnupe_MPC5553.ld
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrc\__start.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcintc_sw_handlers.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcIntcIsrVectors.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcmain.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcmpc5500_ccdcfg.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcmpc5500_demo.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMOsrcmpc5500_xcptn.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMPEGnupe_MPC5553.ld
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrc\__start.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcintc_sw_handlers.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcIntcIsrVectors.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcmain.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcmpc5500_ccdcfg.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcmpc5500_demo.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAMsrcmpc5500_xcptn.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOPEGnupe_MPC5553.ld
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOsrc\__start.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOsrcintc_sw_handlers.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOsrcIntcIsrVectors.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOsrcmain.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMOsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMPEGnupe_MPC5553.ld
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMsrc\__start.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMsrcintc_sw_handlers.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMsrcIntcIsrVectors.c
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAMsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesEVB_PHYTEC_PHYCOREMPC5554PEGnupe_MPC5554.ld
pkgppcnexus	emplatesEVB_PHYTEC_PHYCOREMPC5554_SRAMPEGnupe_MPC5554_SRAM.ld
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHPEGnupe_MPC5553.ld
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrc\__start.s
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcintc_sw_handlers.s
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcIntcIsrVectors.c
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcmain.c
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcmpc5500_ccdcfg.c
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcmpc5500_demo.c
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASHsrcmpc5500_xcptn.c
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMPEGnupe_MPC5553.ld
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrc\__start.s
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcintc_sw_handlers.s
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcIntcIsrVectors.c
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcmain.c
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcmpc5500_ccdcfg.c
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcmpc5500_demo.c
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAMsrcmpc5500_xcptn.c
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHPEGnupe_MPC5553.ld
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrc\__start.s
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcintc_sw_handlers.s
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcIntcIsrVectors.c
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcmain.c
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASHsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMheadersmpc5500_usrccdcfg.h
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMheadersmpc5500_usrdefs.inc
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMPEGnupe_MPC5553.ld
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrc\__start.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcintc_sw_handlers.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcIntcIsrVectors.c
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcmain.c
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcmpc5500_asmcfg.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcmpc5500_ccdcfg.c
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcmpc5500_demo.c
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcmpc5500_SRAM_load.s
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAMsrcmpc5500_xcptn.c

---- Includes WinIDE 2.27a.  The following changes have been made to WinIDE since 
2.26:

Auto-migrate Project Settings
After creating a new project from a template, you may move the project folder to a 
new location. WinIDE will attempt to detect new path settings.

PowerPC-EABISPE GNU Assembler Listing
When creating a listing file with this compiler, new build flags are used in order
to avoid unexpected behavior with the GNU assembler.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.05
PKGPPCNEXUS-USB v1.05

9 May 2006

---- The following changes have been made for this release:

Adds the following documentation:
pkgppcnexusQuick Start Guide MPC5553DEMO MPC5554DEMO.pdf
pkgppcnexusQuick Start Guide PHYCOREMPC5554.pdf

Updates the following documentation:
pkgppcnexusApplication Framework And Solutions Guide.pdf
pkgppcnexusUser's Manual.pdf

Removes the following documentation:
pkgppcnexusQuick Start Guide.pdf

Adds the file: 
pkgppcnexusMPC5500_spr_dump.mac

Adds the following templates:
pkgppcnexus	emplatesEVB_PHYTEC_PHYCOREMPC5554 
pkgppcnexus	emplatesEVB_PHYTEC_PHYCOREMPC5554_SRAM

---- Includes WinIDE 2.26.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.04
PKGPPCNEXUS-USB v1.04

6 March 2006

---- The following changes have been made for this release:

Adds the following documentation:
pkgppcnexusgnugpl.txt
pkgppcnexusApplication Framework And Solutions Guide.pdf
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt

Updates the following documentation:
pkgppcnexusQuick Start Guide.pdf
pkgppcnexusReadMe_pkgPPCnexus.txt
pkgppcnexusUser's Manual.pdf

Adds the following templates:
pkgppcnexus	emplatesMPC5553_MINIMAL_FLASH
pkgppcnexus	emplatesMPC5553_MINIMAL_SRAM
pkgppcnexus	emplatesMPC5554_MINIMAL_FLASH
pkgppcnexus	emplatesMPC5554_MINIMAL_SRAM

In the remaining templates, the following files have been changed:

PEGnuReadMe.txt
Updates documentation.

---- Includes WinIDE 2.26.  The following changes have been made to WinIDE since 
2.22:

Initial Window Size of New Template Projects
Corrects size of windows when opening a new template project.

Default Browse Directory
After opening a new project, WinIDE sets current Windows directory to the path 
of the project file.  After creating a new project from template, WinIDE sets 
current Windows directory to the path of the new project file.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.03
PKGPPCNEXUS-USB v1.03

10 February 2006

---- The following changes have been made for this release:

Updates the following documentation
pkgppcnexusPKGPPCNEXUS_ReleaseNotes.txt
pkgppcnexusQuick Start Guide.pdf
pkgppcnexusUser's Manual.pdf

---- Includes WinIDE 2.22.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library


*********************************************************

PKGPPCNEXUS v1.02
PKGPPCNEXUS-USB v1.02

22 December 2005

---- The following changes have been made for this release:

Adds the following files:
pkgppcnexusmpc5500_any_init.mac
pkgppcnexusMPC5500_ebi_16.mac
pkgppcnexusMPC5500_ebi_32.mac
pkgppcnexusPKGPPCNEXUS_102_ReleaseNotes.txt

Removes the following files:
pkgppcnexusmpc5554_rev01_init.mac
pkgppcnexusmpc5554_rev0_init.mac

Updates the following documents:
pkgppcnexusQuick Start Guide.pdf
pkgppcnexusUser's Manual.pdf

Adds the following templates:
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO_SRAM
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO_SRAM

The remaining templates include the following file changes:

headers
eadme.txt
Adds file.

headers
eadme012.txt
Removes file.

headers
eadme07.txt
Removes file.

PEGnu*.ppf
Updates file names contained in PEmicro project file.

PEGnumpc5500_any_init.mac
Adds file.

PEGnuMPC5500_ebi_16.mac
Adds file.

PEGnuMPC5500_ebi_32.mac
Adds file.

PEGnumpc5554_rev01_init.mac
Removes file.

PEGnumpc5554_rev0_init.mac
Removes file.

PEGnu*.ld
Updates file.  Changes size of memory sections.  Updates code comments.

---- Includes WinIDE 2.22.  The following changes have been made to WinIDE since 
2.21:

GNU Batch Files
Adds command to change current host drive.

GNU Project Wizard
Improves error checking of path for target directory.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.01
PKGPPCNEXUS-USB v1.01

09 November 2005

---- The following changes have been made for this release:

pkgppcnexusExecAndGetStdErr_ReadMe.txt
pkgppcnexusExecAndGetStdErr_ReadMe.exe
Updates utility version to 1.02, which enables NULL token input and allows 
redirection of standard output.

pkgppcnexusReadMe_pkgPPCnexus.ppf
pkgppcnexusReadMe_pkgPPCnexus.txt
Adds a default project file that simply opens ReadMe_pkgPPCnexus.txt, which 
outlines available documentation.

pkgppcnexuswait_for_file_to_be_available.exe
Adds utility to batch file execution.

The following templates have been added:
pkgppcnexus	emplatesEVB_AXIOM_MPC5553DEMO
pkgppcnexus	emplatesEVB_AXIOM_MPC5554DEMO

The following documentation has been added:
pkgppcnexusBuilding GNU for PowerPC EABI SPE.pdf
pkgppcnexusICDPPCNEXUS.HLP
pkgppcnexusQuick Start Guide.pdf
pkgppcnexusUser's Manual.pdf
pkgppcnexuswinide2.hlp

The following files have been added:
pkgppcnexusmpc5554_rev01_init.mac
pkgppcnexusmpc5554_rev0_init.mac

The following files have been removed:
pkgMPC5554zMPC5554_project.ppf
pkgMPC5554zMPC5554_Welcome.doc

The following folders have been removed:
pkgMPC5554zexample
pkgMPC5554zpkgppcz

---- Includes WinIDE 2.21.  The following changes have been made to WinIDE since 
2.07b:

Source Code Error Clearing
When a source code error is marked in a non-active window, WinIDE properly 
resets status bar when a key is pressed.  WinIDE leaves the error mark in the 
non-active child.

Improved Relative Path Support with Project Files

Project Templates
A new menu option provides a means to create a user GNU project from a PEmicro 
template folder.  A template must be fully contained within one folder.

GNU Readelf
Integrates the GNU Readelf utility into the GNU compiler settings.

Error Checks with GNU Compiler Options
WinIDE error checks for blank entries in crucial GNU compiler options.

Cancel Button in GNU Compiler Forms
Provides multiple levels of cancel for GNU compiler forms.

Default Parser Syntax
Sets default parser syntax for unknown file types.

Template Wizard
Adds a redesigned form to allow the user to select destination directory for new 
project.  User may add or delete directories from within the Wizard.

Long Path Names
Adds support for files whose path is greater than 80 characters.

DOS Short Path Names
Provides DOS path names to GNU batch file build script.  This eliminates GNU 
restrictions on path size and space characters in paths.

PEmicro Assembler Templates
Adds support for template projects that use the PEmicro Assembler instead of the GNU 
compiler.

Template Wizard
Prevent user from resizing select directory form. 

DOS Short Path Names
For GNU main input file, the file name format is preserved while its path is 
still translated to DOS short format.

PowerPC EABI SPE Compiler
Adds support for the GNU powerpc-eabispe compiler.

GNU Build Dialog
Adds a new dialog that provides greater control over the application build 
process.

Environment Settings Form Appearance
Disallows user from resizing Environment Settings forms.

GNU Path Error Checking
Adds additional error checking for GNU configuration paths.

Additional GNU Compiler Option
Enables support for the option to compile without linking.

File Synchronization Errors
Adds code to prevent various file synchronization errors when compiling with the 
GNU compiler.

GNU Error Checking
Checks length of command line passed to GCC.

WinIDE Template Settings
When creating a GNU project from a WinIDE template, the user is given the root 
directory of the compiler.

Windows PATH Variable in Batch File Build Script
Temporarily resets the value of Windows PATH variable in batch file build 
script.

PEmicro Syntax Parser
Adds tokens to the syntax highlighting parser for the PEmicro assembler.

Wizard Changes
When using templates, forces default destination directory to be the 
installation directory, rather than the desktop.

PEmicro CASMxx_Pro Assembler
Adds support for the new PEmicro Pro assembler.

PEmicro CASMxxZ Assembler
Updates name of assembler within WinIDE.  Adds mechanism for the user to pass 
command-line arguments directly to the assembler.

GNU Compiler Dialogs
To accommodate various screen sizes, changes border style of GNU dialogs to 
allow the user to resize.

Template Wizard
Improves error checking for location of user compiler.

WinIDE Parser
Adds keywords to PEmicro assembly parser

PEmicro RCASMWxx Assembler
Removes support for this assembler.

Dialog Screen Position
Places GNU compiler dialogs in center of screen.

GNU Relative Path Information
Properly interprets compiler path information that contains the double dot 
notation.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.

ICDPPCNEXUS
PROGPPCNEXUS
CPROGPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 3.4.4-20050522-1:  GNU C compiler, MingWin version
Binutils 2.15.91-20040904-1:  GNU binary utilities, MingWin version
Newlib 1.13.0:  Redhat C target library

*********************************************************

PKGPPCNEXUS v1.00
PKGPPCNEXUS-USB v1.00

25 July 2004

Initial BETA release of product.

---- Includes WinIDE 2.07b.

---- Includes the following PEmicro software.  The version numbers of the PEmicro 
software are the latest versions available at the time of release.
ICDPPCNEXUS
REGPPCNEXUS

---- Includes the following PEmicro hardware.  The hardware revision of the PEmicro 
hardware is the latest revision available at the time of release.  The package 
includes one of the following PEmicro hardware interfaces.

CABPPCNEXUS
USB-ML-PPCNEXUS

---- Includes the following GNU software:

GCC 2.95.3:  GNU C compiler
Binutils 2.10:  GNU binary utilities
Newlib 1.9.0:  Redhat C target library

*********************************************************
PKGCFZ_SW
N/A
Release Notes:
PKGCFZ v8.54
30 June 2021

- USB-ML-UNIVERSAL 10.70
- USB-ML-UNIVERSAL-FX 10.70
- CYCLONE-FX-UNIVERSAL 10.78
- CYCLONE-LC-UNIVERSAL 10.78
- CYCLONE-MAX 8.12

####################################################
PKGCFZ v6.94.00.00
26 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

PROGCFZ  6.94.00.00
CPROGCFZ 6.94.00.00
ICDCFZ   6.94.00.00

###################################################
PKGCFZ v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROGCFZ  5.74.00.00
CPROGCFZ 5.74.00.00
ICDCFZ   5.74.00.00

###################################################
PKGCFZ v5.48.00.00
17 July 2015
 - Updated firmwares v9.37 for USB-ML-Universal Rev C
 - Updated firmware 7.89 for Cyclone Max
 - fixes programming error with any Multilinks if double buffering was enabled

####################################################
PKGCFZ v5.13.02.00
31 October 2014
 - Adds support for USB Multilink Universal FX Rev B
 - Adds support for USB Multilink Universal Rev C
 - Adds updated OSBDM firmware 31.26
 - Adds updated cyclone max firmware 7.84

#######################################################
PKGCFZ v1.78
23 September 2013
- Added Tracelink firmware
PKG-HL-CFZ
8.98
Release Notes:
##################################################
PKGCFZ v8.98
11 Nov 2022
-Native support for USB ML Universal FX Rev D
-Native support for USB ML Universal Rev E

##################################################
PKGCFZ v8.62
Sept 17 2021
- Fixes licensing issue of some multilinks

####################################################
PKGCFZ v8.54
09 August 2021
-Support for Hardware license
-Updated multilink and cyclone firmware
-Updated PDF documentations

30 June 2021
- USB-ML-UNIVERSAL 10.70
- USB-ML-UNIVERSAL-FX 10.70
- CYCLONE-FX-UNIVERSAL 10.78
- CYCLONE-LC-UNIVERSAL 10.78
- CYCLONE-MAX 8.12

####################################################
PKGCFZ v6.94.00.00
26 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

PROGCFZ  6.94.00.00
CPROGCFZ 6.94.00.00
ICDCFZ   6.94.00.00

###################################################
PKGCFZ v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROGCFZ  5.74.00.00
CPROGCFZ 5.74.00.00
ICDCFZ   5.74.00.00

###################################################
PKGCFZ v5.48.00.00
17 July 2015
 - Updated firmwares v9.37 for USB-ML-Universal Rev C
 - Updated firmware 7.89 for Cyclone Max
 - fixes programming error with any Multilinks if double buffering was enabled

####################################################
PKGCFZ v5.13.02.00
31 October 2014
 - Adds support for USB Multilink Universal FX Rev B
 - Adds support for USB Multilink Universal Rev C
 - Adds updated OSBDM firmware 31.26
 - Adds updated cyclone max firmware 7.84

#######################################################
PKGCFZ v1.78
23 September 2013
- Added Tracelink firmware
PKGPPCZ_SW
N/A
Release Notes:
PKGPPCZ v6.94.00.00
6 August 2018

- Version 9.94 firmware and 9.99 bootloader for USB-ML-Universal FX Rev C
- Version 9.99 bootloader and firmware for the Cyclone Universal [FX] Rev B 

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMPPCZ  3.10
PROGPPCZ  6.94.00.00
CPROGPPCZ 6.94.00.00
ICDPPCZ   6.94.00.00
WINIDE    2.35

*********************************************************
PKGPPCZ v5.16.00.00
16 January 2015

---- The following changes have been made for this release:

This release adds supports for the Multilink Universal FX (USB-ML-UNIVERSAL-FX RevB) development tool to ICDPPCZ and PROGPPCZ.

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMPPCZ  3.10
PROGPPCZ  5.13.02.00
CPROGPPCZ 5.13.02.00
ICDPPCZ   5.16.00.00
WINIDE    2.35

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONE MAX
USB-ML-UNIVERSAL-FX RevB

*********************************************************
PKGPPCZ v1.47.00.05
22 February 2013

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

PROGPPCZ 1.62.00.01
CPROGPPCZ 1.62.00.01
ICDPPCZ 1.47.00.05

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONE MAX
USB-ML-PPCBDM

---- Software Release Notes ----

ICDPPCZ v1.47.00.05
Adds the following:
-Fixed incorrect disassembly for certain instructions
PKG-HL-PPCZ
8.98
Release Notes:
##################################################
PKGPPCZ v8.98
11 Nov 2022
-Native support for USB ML Universal FX Rev D
-Native support for USB ML Universal Rev E

##################################################
PKGPPCZ v8.62
Sept 17 2021
- Fixes licensing issue of some multilinks

####################################################
PKGPPCZ v8.54
09 August 2021
-Support for Hardware license
-Updated multilink and cyclone firmware
-Updated PDF documentations

##################################################
PKGPPCZ v6.94.00.00
6 August 2018

- Version 9.94 firmware and 9.99 bootloader for USB-ML-Universal FX Rev C
- Version 9.99 bootloader and firmware for the Cyclone Universal [FX] Rev B 

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMPPCZ  3.10
PROGPPCZ  6.94.00.00
CPROGPPCZ 6.94.00.00
ICDPPCZ   6.94.00.00
WINIDE    2.35

*********************************************************
PKGPPCZ v5.16.00.00
16 January 2015

---- The following changes have been made for this release:

This release adds supports for the Multilink Universal FX (USB-ML-UNIVERSAL-FX RevB) development tool to ICDPPCZ and PROGPPCZ.

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMPPCZ  3.10
PROGPPCZ  5.13.02.00
CPROGPPCZ 5.13.02.00
ICDPPCZ   5.16.00.00
WINIDE    2.35

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONE MAX
USB-ML-UNIVERSAL-FX RevB

*********************************************************
PKGPPCZ v1.47.00.05
22 February 2013

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

PROGPPCZ 1.62.00.01
CPROGPPCZ 1.62.00.01
ICDPPCZ 1.47.00.05

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONE MAX
USB-ML-PPCBDM

---- Software Release Notes ----

ICDPPCZ v1.47.00.05
Adds the following:
-Fixed incorrect disassembly for certain instructions
PKG12Z_SW
N/A
Release Notes:
PKG12Z v6.94.00.00
26 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

PROG12Z  6.94.00.00
CPROG12Z 6.94.00.00
ICD12Z   6.94.00.00

###################################################
PKG12Z v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROG12Z  5.74.00.00
CPROG12Z 5.74.00.00
ICD12Z   5.74.00.00

###################################################
PKG12Z
HCS(12)X Development Package 
(C)opyright 2012, P&E Microcomputer Systems, Inc.
Visit us at http://www.pemicro.com

*********************************************************

PKG12Z v1.88
18 May 2012

---- The following changes have been made for this release:

This release supports Windows 7/XP/Vista 32/64 bit as well as Windows 2000/XP 32-bit

---- Includes WinIDE 2.35.

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASM12Z 3.18
PROG12Z 2.00.00.01
CPROG12Z 2.00.00.01
ICD12Z 1.88

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONE PRO
USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX

*********************************************************
PKG-HL-12Z
8.98
Release Notes:
##################################################
PKG12Z v8.98
11 Nov 2022
-Native support for USB ML Universal FX Rev D
-Native support for USB ML Universal Rev E

##################################################
PKG12Z v8.62
Sept 17 2021
- Fixes licensing issue of some multilinks

####################################################
PKG12Z v8.54
09 August 2021
-Support for Hardware license
-Updated multilink and cyclone firmware
-Updated PDF documentations

##################################################
PKG12Z v6.94.00.00
26 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

PROG12Z  6.94.00.00
CPROG12Z 6.94.00.00
ICD12Z   6.94.00.00

###################################################
PKG12Z v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROG12Z  5.74.00.00
CPROG12Z 5.74.00.00
ICD12Z   5.74.00.00

###################################################
PKG12Z
HCS(12)X Development Package 
(C)opyright 2012, P&E Microcomputer Systems, Inc.
Visit us at http://www.pemicro.com

*********************************************************

PKG12Z v1.88
18 May 2012

---- The following changes have been made for this release:

This release supports Windows 7/XP/Vista 32/64 bit as well as Windows 2000/XP 32-bit

---- Includes WinIDE 2.35.

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASM12Z 3.18
PROG12Z 2.00.00.01
CPROG12Z 2.00.00.01
ICD12Z 1.88

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONE PRO
USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX

*********************************************************
PKG16Z_SW
N/A
Release Notes:
PKG16Z 6.94.00.00
6 August 2018

- Version 9.94 firmware and 9.99 bootloader for USB-ML-Universal FX Rev C

PROG16Z  6.94.00.00
CPROG16Z 6.94.00.00
ICD16Z   6.94.00.00
CASM16Z 3.10
WINIDE 2.35

*********************************************************
PKG16Z 6.74.00.00
22 January 2018
- Driver 12.7 supports Windows 10 Secure boot
- Version 9.40 firmware and bootloader for USB-ML-Universal FX Rev B

CASM16Z 3.10
WINIDE 2.35
PROG16Z  6.74.00.00
CPROG16Z 6.74.00.00
ICD16Z   6.74.00.00

###################################################
PKG16Z v1.67.00.00
24 September 2012

---- The following changes have been made for this release:

This release adds supports for the Multilink Universal FX (USB-ML-UNIVERSAL-FX) development tool.

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASM16Z 3.10   
PROG16Z 2.22.00.01  
PROG16Z 2.22.00.01
ICD16Z 1.67.00.00
WINIDE 2.35
REG16

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-16/32
USB-ML-UNIVERSAL-FX

*********************************************************
PKGCFV1_SW
N/A
Release Notes:
PKGCFV1 v8.54
30 June 2021

- USB-ML-UNIVERSAL 10.70
- USB-ML-UNIVERSAL-FX 10.70
- CYCLONE-FX-UNIVERSAL 10.78
- CYCLONE-LC-UNIVERSAL 10.78
- CYCLONE-PRO 8.87

####################################################
PKGCFV1 v6.94.00.00
25 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

###################################################
PKGCFV1 v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROGCFV1  5.74.00.00
CPROGCFV1 5.74.00.00
ICDCFV1   5.74.00.00

###################################################
PKGCFV1
ColdFire V1 ASM Development Package 
(C)opyright 2012, P&E Microcomputer Systems, Inc.
Visit us at http://www.pemicro.com

*********************************************************

PKGCFV1 v1.06

August 27, 2012

---- The following changes have been made for this release:

- Now supports the USB Multilink Universal and USB Multilink Universal FX interfaces.

- This release supports Windows 7/XP/Vista 32/64 bit as well as Windows 2000/XP 32-bit.

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMCFZ 3.12  
PROGCFV1 1.23.00.01
CPROGCFV1 1.23.00.01
ICDCFV1 1.06.00.00
WINIDE 2.35
REGCF

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONEPRO
USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX

*********************************************************
PKG-HL-16Z
8.98.0.1
Release Notes:
##################################################
PKG16Z v8.98.0.1
15 May 2023
- Includes 11.09 firmware that fixes HW licensing bug that prevents your license from "sticking" to the Multilink FX in some cases.
-Updated User Guide

PROG16Z/CPROG16Z  9.16
ICD16Z 8.98
CASM16Z 3.12
WINIDE 2.35

##################################################
PKG16Z v8.98
11 Nov 2022
-Native support for USB ML Universal FX Rev D
-Native support for USB ML Universal Rev E

##################################################
PKG16Z v8.62
Sept 17 2021
- Fixes licensing issue of some multilinks

####################################################
PKG16Z v8.54
09 August 2021
-Support for Hardware license
-Updated multilink and cyclone firmware
-Updated PDF documentations

##################################################
PKG16Z 6.94.00.00
6 August 2018

- Version 9.94 firmware and 9.99 bootloader for USB-ML-Universal FX Rev C

PROG16Z  6.94.00.00
CPROG16Z 6.94.00.00
ICD16Z   6.94.00.00
CASM16Z 3.10
WINIDE 2.35

*********************************************************
PKG16Z 6.74.00.00
22 January 2018
- Driver 12.7 supports Windows 10 Secure boot
- Version 9.40 firmware and bootloader for USB-ML-Universal FX Rev B

CASM16Z 3.10
WINIDE 2.35
PROG16Z  6.74.00.00
CPROG16Z 6.74.00.00
ICD16Z   6.74.00.00

###################################################
PKG16Z v1.67.00.00
24 September 2012

---- The following changes have been made for this release:

This release adds supports for the Multilink Universal FX (USB-ML-UNIVERSAL-FX) development tool.

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASM16Z 3.10   
PROG16Z 2.22.00.01  
PROG16Z 2.22.00.01
ICD16Z 1.67.00.00
WINIDE 2.35
REG16

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-16/32
USB-ML-UNIVERSAL-FX

*********************************************************
PKG-HL-CFV1
8.98
Release Notes:
##################################################
PKGCFV1 v8.98
11 Nov 2022
-Native support for USB ML Universal FX Rev D
-Native support for USB ML Universal Rev E

##################################################
PKGCFV1 v8.62
Sept 17 2021
- Fixes licensing issue of some multilinks

####################################################
PKGCFV1 v8.54
09 August 2021
-Support for Hardware license
-Updated multilink and cyclone firmware
-Updated PDF documentations

30 June 2021

- USB-ML-UNIVERSAL 10.70
- USB-ML-UNIVERSAL-FX 10.70
- CYCLONE-FX-UNIVERSAL 10.78
- CYCLONE-LC-UNIVERSAL 10.78
- CYCLONE-PRO 8.87

####################################################
PKGCFV1 v6.94.00.00
25 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

###################################################
PKGCFV1 v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROGCFV1  5.74.00.00
CPROGCFV1 5.74.00.00
ICDCFV1   5.74.00.00

###################################################
PKGCFV1
ColdFire V1 ASM Development Package 
(C)opyright 2012, P&E Microcomputer Systems, Inc.
Visit us at http://www.pemicro.com

*********************************************************

PKGCFV1 v1.06

August 27, 2012

---- The following changes have been made for this release:

- Now supports the USB Multilink Universal and USB Multilink Universal FX interfaces.

- This release supports Windows 7/XP/Vista 32/64 bit as well as Windows 2000/XP 32-bit.

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMCFZ 3.12  
PROGCFV1 1.23.00.01
CPROGCFV1 1.23.00.01
ICDCFV1 1.06.00.00
WINIDE 2.35
REGCF

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONEPRO
USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX

*********************************************************
PKG32Z_SW
N/A
Release Notes:
PKG32Z 6.94.00.00
6 August 2018

- Version 9.94 firmware and 9.99 bootloader for USB-ML-Universal FX Rev C

PROG32Z  6.94.00.00
CPROG32Z 6.94.00.00
ICD32Z   6.94.00.00
CASM32Z 3.12
WINIDE 2.35

*********************************************************
PKG32Z 6.74.00.00
17 January 2018
- Driver 12.7 supports Windows 10 Secure boot
- Version 9.40 firmware and bootloader for USB-ML-Universal FX Rev B

PROG32Z  6.74.00.00
CPROG32Z 6.74.00.00
ICD32Z   6.74.00.00

###################################################
PKG32Z v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROG32Z  5.74.00.00
CPROG32Z 5.74.00.00
ICD32Z   5.74.00.00

###################################################
PKG32Z 5.13.02.00
25 September 2014

---- The following changes have been made for this release:

This release adds supports for the Multilink Universal FX (USB-ML-UNIVERSAL-FX RevB) development tool.

---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

CASM32Z 3.12  
PROG32Z 5.13.02.00
CPROG32Z 5.13.02.00
ICD32Z 5.13.02.00
WINIDE 2.35

---- May include the one of following PEmicro hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-UNIVERSAL-FX RevB

*********************************************************
PKG32Z v1.68
4 June 2012

---- The following changes have been made for this release:

This release adds supports for the Multilink Universal FX (USB-ML-UNIVERSAL-FX) development tool.

---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

CASM32Z 3.12  
PROG32Z 2.20.00.01
CPROG32Z 2.20.00.01
ICD32Z 1.68.00.00
WINIDE 2.35

---- May include the one of following PEmicro hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-16/32
USB-ML-UNIVERSAL-FX RevA

*********************************************************
PKG-HL-32Z
8.98.0.1
Release Notes:
##################################################
PKG32Z v8.98.0.1
15 May 2023
- Includes 11.09 firmware that fixes HW licensing bug that prevents your license from "sticking" to the Multilink FX in some cases.
-Updated User Guide

PROG32Z/CPROG32Z  9.16
ICD32Z 8.98
CASM32Z 3.12
WINIDE 2.35

##################################################
PKG32Z v8.98
11 Nov 2022
-Native support for USB ML Universal FX Rev D
-Native support for USB ML Universal Rev E

##################################################
PKG32Z v8.62
Sept 17 2021
- Fixes licensing issue of some multilinks

####################################################
PKG32Z v8.54
09 August 2021
-Support for Hardware license
-Updated multilink and cyclone firmware
-Updated PDF documentations

##################################################
PKG32Z 6.94.00.00
6 August 2018

- Version 9.94 firmware and 9.99 bootloader for USB-ML-Universal FX Rev C

PROG32Z  6.94.00.00
CPROG32Z 6.94.00.00
ICD32Z   6.94.00.00
CASM32Z 3.12
WINIDE 2.35

*********************************************************
PKG32Z 6.74.00.00
17 January 2018
- Driver 12.7 supports Windows 10 Secure boot
- Version 9.40 firmware and bootloader for USB-ML-Universal FX Rev B

PROG32Z  6.74.00.00
CPROG32Z 6.74.00.00
ICD32Z   6.74.00.00

###################################################
PKG32Z v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROG32Z  5.74.00.00
CPROG32Z 5.74.00.00
ICD32Z   5.74.00.00

###################################################
PKG32Z 5.13.02.00
25 September 2014

---- The following changes have been made for this release:

This release adds supports for the Multilink Universal FX (USB-ML-UNIVERSAL-FX RevB) development tool.

---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

CASM32Z 3.12  
PROG32Z 5.13.02.00
CPROG32Z 5.13.02.00
ICD32Z 5.13.02.00
WINIDE 2.35

---- May include the one of following PEmicro hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-UNIVERSAL-FX RevB

*********************************************************
PKG32Z v1.68
4 June 2012

---- The following changes have been made for this release:

This release adds supports for the Multilink Universal FX (USB-ML-UNIVERSAL-FX) development tool.

---- Includes the following PEmicro software.  The version numbers of the PEmicro software are the latest versions available at the time of release.

CASM32Z 3.12  
PROG32Z 2.20.00.01
CPROG32Z 2.20.00.01
ICD32Z 1.68.00.00
WINIDE 2.35

---- May include the one of following PEmicro hardware interfaces.  The hardware revision is the latest available at the time of release.

USB-ML-16/32
USB-ML-UNIVERSAL-FX RevA

*********************************************************
PKGHCS08_SW
N/A
Release Notes:
PKGHCS08 v6.94.00.00
25 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

###################################################
PKGHCS08 v6.22.00.00
29 September 2017
- v9.81 firmware for USB-ML-UNIVERSAL Rev D
- WinDriver 12.4 to support  Windows 10 1607 Secure Boot

PROGHCS08  6.22.00.00
CPROGHCS08 6.22.00.00
ICDHCS08   6.22.00.00

###################################################
PKGHCS08 v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROGHCS08  5.74.00.00
CPROGHCS08 5.74.00.00
ICDHCS08   5.74.00.00

###################################################
PKGHCS08
HCS08 Development Package 
(C)opyright 2012, P&E Microcomputer Systems, Inc.
Visit us at http://www.pemicro.com
*********************************************************
PKGHCS08 v5.16.00.00
6 January 2015
10 February 2015

---- The following changes have been made for this release:

6 January 2015
- Adds support for USB-ML-UNIVERSAL Rev C 
- Adds support for USB-ML-UNIVERSAL-FX Rev B 

10 February 2015
- New v9.33 bootloader for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B
- New v9.34 firmware for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B
- New 31.26 OSBDM firmware

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMHCS08 PRO 1.01
PROGHCS08 5.21.00.00 
CPROGHCS08 5.21.00.00
ICDHCS08 5.16.00.00
WINIDE 2.35 

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONE PRO
USB-ML-UNIVERSAL 
USB-ML-UNIVERSAL-FX

*********************************************************
PKGHCS08 v1.52
28 November 2012

---- The following changes have been made for this release:

- Update algorithms for HCS08 PT/PA/PL devices.

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMHCS08 PRO 1.01
PROGHCS08 1.79.00.00 
CPROGHCS08 1.79.00.00
ICDHCS08 1.52.00.00
WINIDE 2.35 

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONE PRO
USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX

*********************************************************

PKGHCS08 v1.52
2 July 2012

---- The following changes have been made for this release:

- Adds support for the Multilink Universal FX (USB-ML-UNIVERSAL-FX) development tool.

- Adds support for the HCS08 PT/PA/PL devices. The Reset pin on these new devices are slightly different than on other HCS08s. 

This release supports Windows 7/XP/Vista 32/64 bit as well as Windows 2000/XP 32-bit

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMHCS08 PRO 1.01
PROGHCS08 1.79.00.00 
CPROGHCS08 1.79.00.00
ICDHCS08 1.52.00.00
WINIDE 2.35 

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONE PRO
USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX

*********************************************************
PKGRS08_SW
N/A
Release Notes:
PKGRS08 v6.94.00.00
25 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

###################################################
PKGRS08 v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROGRS08  5.74.00.00
CPROGRS08 5.74.00.00
ICDRS08   5.74.00.00

###################################################

PKGRS08
RS08 Development Package 
(C)opyright 2012, P&E Microcomputer Systems, Inc.
Visit us at http://www.pemicro.com

*********************************************************
PKGRS08 5.16.00.00
13 January 2015

---- The following changes have been made for this release:

- Adds support for USB-ML-UNIVERSAL-FX Rev B
- Adds support for USB-ML-UNIVERSAL Rev C

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMRS08_PRO 1.01  
PROGRS08 5.13.02.00
CPROGRS08 5.13.02.00
ICDRS08 5.16.00.00 
SIMRS08KA2 1.00 
WINIDE 2.35

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONEPRO
USB-ML-UNIVERSAL RevC
USB-ML-UNIVERSAL-FX RevB

*********************************************************
PKGRS08 v1.12.00.00

August 22, 2012

---- The following changes have been made for this release:

- Now supports the USB Multilink Universal and USB Multilink Universal FX interfaces.

- This release supports Windows 7/XP/Vista 32/64 bit as well as Windows 2000/XP 32-bit.

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMRS08_PRO 1.01  
PROGRS08 1.27.00.01
CPROGRS08 1.27.00.01
ICDRS08 1.12.00.00 
SIMRS08KA2 1.00 
WINIDE 2.35

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONEPRO
USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX

*********************************************************
PKG-HL-HCS08
8.98
Release Notes:
##################################################
PKGHCS08 v8.98
11 Nov 2022
-Native support for USB ML Universal FX Rev D
-Native support for USB ML Universal Rev E

##################################################
PKGHCS08 v8.62
Sept 17 2021
- Fixes licensing issue of some multilinks

####################################################
PKGHCS08 v8.54
09 August 2021
-Support for Hardware license
-Updated multilink and cyclone firmware
-Updated PDF documentations

##################################################
PKGHCS08 v6.94.00.00
25 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

###################################################
PKGHCS08 v6.22.00.00
29 September 2017
- v9.81 firmware for USB-ML-UNIVERSAL Rev D
- WinDriver 12.4 to support  Windows 10 1607 Secure Boot

PROGHCS08  6.22.00.00
CPROGHCS08 6.22.00.00
ICDHCS08   6.22.00.00

###################################################
PKGHCS08 v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROGHCS08  5.74.00.00
CPROGHCS08 5.74.00.00
ICDHCS08   5.74.00.00

###################################################
PKGHCS08
HCS08 Development Package 
(C)opyright 2012, P&E Microcomputer Systems, Inc.
Visit us at http://www.pemicro.com
*********************************************************
PKGHCS08 v5.16.00.00
6 January 2015
10 February 2015

---- The following changes have been made for this release:

6 January 2015
- Adds support for USB-ML-UNIVERSAL Rev C 
- Adds support for USB-ML-UNIVERSAL-FX Rev B 

10 February 2015
- New v9.33 bootloader for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B
- New v9.34 firmware for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B
- New 31.26 OSBDM firmware

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMHCS08 PRO 1.01
PROGHCS08 5.21.00.00 
CPROGHCS08 5.21.00.00
ICDHCS08 5.16.00.00
WINIDE 2.35 

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONE PRO
USB-ML-UNIVERSAL 
USB-ML-UNIVERSAL-FX

*********************************************************
PKGHCS08 v1.52
28 November 2012

---- The following changes have been made for this release:

- Update algorithms for HCS08 PT/PA/PL devices.

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMHCS08 PRO 1.01
PROGHCS08 1.79.00.00 
CPROGHCS08 1.79.00.00
ICDHCS08 1.52.00.00
WINIDE 2.35 

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONE PRO
USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX

*********************************************************

PKGHCS08 v1.52
2 July 2012

---- The following changes have been made for this release:

- Adds support for the Multilink Universal FX (USB-ML-UNIVERSAL-FX) development tool.

- Adds support for the HCS08 PT/PA/PL devices. The Reset pin on these new devices are slightly different than on other HCS08s. 

This release supports Windows 7/XP/Vista 32/64 bit as well as Windows 2000/XP 32-bit

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMHCS08 PRO 1.01
PROGHCS08 1.79.00.00 
CPROGHCS08 1.79.00.00
ICDHCS08 1.52.00.00
WINIDE 2.35 

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONE PRO
USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX

*********************************************************
PKG-HL-RS08
8.98
Release Notes:
##################################################
PKGRS08 v8.98
11 Nov 2022
-Native support for USB ML Universal FX Rev D
-Native support for USB ML Universal Rev E

##################################################
PKGRS08 v8.62
Sept 17 2021
- Fixes licensing issue of some multilinks

####################################################
PKGRS08 v8.54
09 August 2021
-Support for Hardware license
-Updated multilink and cyclone firmware
-Updated PDF documentations

##################################################
PKGRS08 v6.94.00.00
25 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

###################################################
PKGRS08 v5.74.00.00
12 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10

PROGRS08  5.74.00.00
CPROGRS08 5.74.00.00
ICDRS08   5.74.00.00

###################################################

PKGRS08
RS08 Development Package 
(C)opyright 2012, P&E Microcomputer Systems, Inc.
Visit us at http://www.pemicro.com

*********************************************************
PKGRS08 5.16.00.00
13 January 2015

---- The following changes have been made for this release:

- Adds support for USB-ML-UNIVERSAL-FX Rev B
- Adds support for USB-ML-UNIVERSAL Rev C

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMRS08_PRO 1.01  
PROGRS08 5.13.02.00
CPROGRS08 5.13.02.00
ICDRS08 5.16.00.00 
SIMRS08KA2 1.00 
WINIDE 2.35

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONEPRO
USB-ML-UNIVERSAL RevC
USB-ML-UNIVERSAL-FX RevB

*********************************************************
PKGRS08 v1.12.00.00

August 22, 2012

---- The following changes have been made for this release:

- Now supports the USB Multilink Universal and USB Multilink Universal FX interfaces.

- This release supports Windows 7/XP/Vista 32/64 bit as well as Windows 2000/XP 32-bit.

---- Includes the following P&E software.  The version numbers of the P&E software are the latest versions available at the time of release.

CASMRS08_PRO 1.01  
PROGRS08 1.27.00.01
CPROGRS08 1.27.00.01
ICDRS08 1.12.00.00 
SIMRS08KA2 1.00 
WINIDE 2.35

---- May include the one of following P&E hardware interfaces.  The hardware revision is the latest available at the time of release.

CYCLONEPRO
USB-ML-UNIVERSAL
USB-ML-UNIVERSAL-FX

*********************************************************

Pricing Details

In Stock PKG-HL-PPCNEXUS Qorivva MPC5xxx Development Package Hardware License $849.00
Qty. Price
1 US$849.00
2 to 4 US$807.00
5 to 9 US$765.00
10 to 24 US$680.00
25+ Contact us
Configure & buy
In Stock PKG-HL-CFZ ColdFire Development Package Hardware License $649.00
Qty. Price
1 US$649.00
2 to 4 US$619.00
5 to 9 US$589.00
10 to 24 US$529.00
25+ Contact us
Configure & buy
In Stock PKG-HL-PPCZ Power Architecture 5xx/8xx Development Package Hardware License $599.00
Qty. Price
1 US$599.00
2 to 4 US$569.00
5 to 9 US$539.00
10 to 24 US$479.00
25+ Contact us
Configure & buy
In Stock PKG-HL-12Z 68HC(S)12 Development Package Hardware License $549.00
Qty. Price
1 US$549.00
2 to 4 US$524.00
5 to 9 US$499.00
10 to 24 US$449.00
25+ Contact us
Configure & buy
In Stock PKG-HL-16Z 68HC16 Development Package Hardware License $499.00
Qty. Price
1 US$499.00
2 to 4 US$475.00
5 to 9 US$449.00
10 to 24 US$399.00
25+ Contact us
Configure & buy
In Stock PKG-HL-CFV1 ColdFire V1 ASM Development Package Hardware License $499.00
Qty. Price
1 US$499.00
2 to 4 US$475.00
5 to 9 US$449.00
10 to 24 US$399.00
25+ Contact us
Configure & buy
In Stock PKG-HL-32Z 683xx Development Package Hardware License $495.00
Qty. Price
1 US$495.00
2 to 4 US$475.00
5 to 9 US$449.00
10 to 24 US$399.00
25+ Contact us
Configure & buy
In Stock PKG-HL-HCS08 68HCS08 Development Package Hardware License $399.00
Qty. Price
1 US$399.00
2 to 4 US$379.00
5 to 9 US$359.00
10 to 24 US$319.00
25+ Contact us
Configure & buy
In Stock PKG-HL-RS08 RS08 Development Package Hardware License $399.00
Qty. Price
1 US$399.00
2 to 4 US$379.00
5 to 9 US$359.00
10 to 24 US$319.00
25+ Contact us
Configure & buy


Accessories & Add-ons

In stock
USB Multilink Universal Debug Probe for ARM® devices and 8/16/32 bit devices (software sold separately)
US$299.00 +Add to Cart
In stock
USB Multilink Universal FX High-Speed Debug Probe for ARM® devices and 8/16/32 bit devices (software sold separately)
US$599.00 +Add to Cart
In stock
USB Multilink Debug Probe for ARM® devices (software sold separately)
US$229.00 +Add to Cart
PKG08SZ

PKG08SZ for NXP's HC08 devices is available at no cost; click to download PKG08SZ.



Worldwide Shipping

We can ship either low-cost ground to USA, Canada and Mexico, or by air to most countries (including next-day service where supported).

Fast and Friendly Support

We offer several support options to help you get up to speed or diagnose issues fast.

1-Year Warranty

Most of our products carry a 1-year warranty, and offer industrial-grade construction.