PROG Flash Programming Software : Flash/EEPROM programming software. Includes interactive and scripted programming.

Overview

PEmicro's PROG flash programming software allows the user to program/reprogram external flash devices in-circuit, via one of PEmicro's compatible hardware debug probes. The debug probe connects the USB port of the PC to the target header. The programming software can then talk to the target processor via debug mode.

PROG software includes a fully interactive programmer and also a command-line executable called CPROG for scripted programming.

PROG: USB Connection To Target via PEmicro Multilink

Hardware License

The license that activates PROG will reside on a Multilink debug probe.The user who activates the software will choose a Multilink on which to permanently install the license. The allows that Multilink to work with PROG on any machine where a supported version of the software is installed.

Note: PROG software is almost always sold with a Multilink probe, and this setup is intended for debug and development. Those looking for a more robust, production-oriented programming solution should learn about PEmicro's Cyclone programmers which include all supported versions of PROG as part of the package. No additional license in required in that case

Check our PROG Licensing blog post to see which Revisions of Multilink debug probe are supported.

Supported Devices

There is a variety of PROG software available; each version supports a different MCU architecture. To see if the device you are interested in is supported, please view the corresponding programming algorithm list. PROG will include this library of algorithms.

Easy to Set Up and Use

Connection Manager

The Connection Manager allows easy debug configuration and connection to the target via the debug probe.

Interactive Programming

Each PROG supports a different set of commands. These commands commonly include:

Program
Verify
Blank check
Upload
Display
Erase

and many more.

For interactive programming, supported commands are listed in the Choose Programming Function Window.

Scripted Programming

There is also a CRPROG executable included which allows the user to create programming scripts to automate the programming process. A separate CPROG user manual details the procedure for scripted programming.

Serial Numbering

PROG/CPROG software also supports serial numbering via the Serialize Utility (direct download).

PROGDSC

PROGDSC, PEmicro's flash programming software for NXP's DSC devices, is available free of charge; click to download PROGDSC.

System Requirements

Windows 7/8/10: 32-bit (x86) or 64-bit (x64)
Windows 11: 64-bit (x64)

Compatible Hardware:
	Multilink	Multilink FX	Cyclone LC	Cyclone FX
Supported PROGs	PROG08SZ not supported (MON08) PROG16Z not supported PROG32Z not supported PROGPPCZ not supported	PROG08SZ not supported (MON08)	Note: Cyclone Install includes pre-installed non-transferable licenses for all supported PROG software PROG16Z not supported PROG32Z not supported	Note: Cyclone Install includes pre-installed non-transferable licenses for all supported PROG software All PROGs supported
Usage	Development	Development	Development Production Programming Test	Development Production Programming Test
PROG Included with Hardware	No	No	Yes	Yes
Operating Modes	Tethered To PC	Tethered To PC	Tethered To PC Stand-Alone Programming Cloud-Connected Images	Tethered To PC Stand-Alone Programming Cloud-Connected Images
Communication	High-Speed USB 2.0	High-Speed USB 2.0	Full-Speed USB 2.0 Ethernet 10/100 baseT Serial Baud 115200 N81	High-Speed USB 2.0 Ethernet 10/100 baseT Serial Baud 115200 N81
Speed	Moderate	Very Fast	Very Fast	Extremely fast: Up to 25Mb/s
Power Management	Does not provide target power	Can provide 3V/5V via ribbon cable	Can provide 1.8-5V via ribbon cable automatically switch up to 24V via internal relays	Can provide 1.8-5V via ribbon cable Automatically switch up to 24V via internal relays
Automation	Scripted programming using CPROG* (sold separately)	Scripted programming using CPROG* (sold separately)	Cyclone Automated Control SDK Scripted programming using CPROG*	Cyclone Automated Control SDK Scripted programming using CPROG*
Interface Part #s	MULTILINK_ACP MULTILINK_UNIVERSAL	MULTILINK_UNIVERSAL_FX	CYCLONE_LC_ARM CYCLONE_LC_UNIV	CYCLONE_FX_ARM CYCLONE_FX_UNIV
Extended Security Features	-	-	ProCryption Security via additional license Anti-tamper Technology	ProCryption Security (RSA/AES image encryption) Anti-tamper Technology Limit programming to a date range Limit # of programming operations
On-board memory	-	-	16MB, 8 images	1GB, no image limit
Expandable Storage	-	-	SDHC port no longer available	SDHC port included
*CPROG is included with PROG Software

Chip Select Diagnostics for External Flash

PEmicro supports both internal flash and flash connected to an MCU via the SPI, I2C, and Address/Data bus interfaces. Programming algorithms must make assumptions about how the flash is connected to the MCU, but if these assumptions are off, the "Chip Select Diagnostics Mode" in our PROG software can help the user determine what changes may need to be made to the programming algorithm to match their device setup. Read more about how to use Diagnostics mode:

Chip Select Diagnostics for External Flash

Jump to: Documentation / Manuals Downloads FAQs Version info & Release Notes

Documentation / Manuals
	PROG32Z User Manual (1298 KB) PROG32Z User Manual .pdf
	CPROGS12ZZ User Guide (182 KB) PDF Document describing the command-line parameters for the command line flash programming application. Has an example of writing a programming script file and also of reading the programming result with a batch file.
	CPROGPPCZ User Guide (188 KB) PDF Document describing the command-line parameters for the command line flash programming application. Has an example of writing a programming script file and also of reading the programming result with a batch file. v.1.02, May 2017.
	CPROGPPCNEXUS User Guide (188 KB) PDF Document describing the command-line parameters for the command line flash programming application. Has an example of writing a programming script file and also of reading the programming result with a batch file.
	CPROGHCS08 User Guide (642 KB) PDF Document describing the command-line parameters for the command line flash programming application. Has an example of writing a programming script file and also of reading the programming result with a batch file.
	CPROGDSC User Guide (613 KB) PDF User guide for CPROGDSC command-line programming software
	CPROGCFZ User Guide (189 KB) PDF Document describing the command-line parameters for the command line flash programming application. Has an example of writing a programming script file and also of reading the programming result with a batch file.
	CPROGACMP User Guide (325 KB) PDF User Guide for CPROGACMP (command-line programmer for ARM Cortex-M processors)
	CPROG32Z User Guide (185 KB) PDF Document describing the command-line parameters for the command line flash programming application. Has an example of writing a programming script file and also of reading the programming result with a batch file.
	CPROG16Z User Guide (184 KB) PDF Document describing the command-line parameters for the command line flash programming application. Has an example of writing a programming script file and also of reading the programming result with a batch file.
	CPROG12Z User Guide (188 KB) PDF Document describing the command-line parameters for the command line flash programming application. Has an example of writing a programming script file and also of reading the programming result with a batch file.
	Hardware License Activation Guide (730 KB) PEmicro software with -HL- in the part number has a hardware license that must be installed into a hardware interface, typically a Multilink. This is a guide to assist with that installation.
	PROGTRICORE User Manual PDF (1121 KB) User manual for PROGTRICORE flash programming software (part of CYCLONE LC AND CYCLONE FX Installation software).
	PROGS12ZZ User Manual (1812 KB) PROGS12ZZ User Manual (.pdf)
	PROGRS08Z User Manual (1084 KB) User Manual (.pdf) for PROGRS08Z Flash Programming Software.
	PROGPPCZ User Manual (1697 KB) User Manual for PROGPPCZ Flash Programming Software, pdf.
	PROGPPCNEXUS User Manual (1831 KB) User manual for PROGPPCNEXUS flash programming software.
	PROGHCS08 User Manual (2016 KB) User Manual for PROGHCS08 programming software. .pdf.
	PROGDSC User Manual (1817 KB) User manual for PROGDSC flash programming software (.pdf).
	PROGCFZ User Manual (2000 KB) User Manual for PEmicro's PROGCFZ Flash Programming software (ColdFire V2/3/4).
	PROGCFV1 User Manual (1760 KB) User manual for PROGCFV1 flash programming software for NXP ColdFire V1 devices.
	PROGACMP User Manual (1590 KB) User manual for PROGACMP flash programming software.
	PROG16Z User Manual (1203 KB) User Manual for PROG16Z - Flash programming software for NXP's 68HC16 devices.
	PROG12Z User Manual (1845 KB) User Manual for PEmicro's PROG1Z, flash programming software for NXP 68HC(S)12(X) devices.
	CPROG08SZ - Command-line Programmer Documentation (241 KB) Document describing the command-line parameters for the command line flash programming application. Has an example of writing a programming script file and also of reading the programming result with a batch file.
	CPROGMON08 - Command-line Programmer Documentation (21 KB) Document describing the command-line parameters for the command line flash programming application. Has an example of writing a programming script file and also of reading the programming result with a batch file.

Downloads
	Unsecure 12 (4400 KB) Unsecures HC(S)12(X) devices via PEmicro's BDM Interfaces such as Cyclone-PRO, USB-ML-12, and BDM-Multilink. A mass erase of the flash on the device is required. This version supports the USB-ML-12 Rev B and Rev C.
	Log2phy 12 (1164 KB) Utility which converts HC(S)12(X) Logical Records to Physical S-Records. Now supports S12X devices EEPROM. Updated March 16 2023.
	SERIALIZE Legacy - Use an Automated Serial Number (262 KB) Allows the generation of a .SER serial number description file. This graphical utility sets up a serial number which will count according to the bounds set by the user. The .SER file can be called by the PROG flash programmer to program a serial number into the target, or loaded into the cyclone standalone image.

FAQs
	When using the multilink with your software tools, I get an error $8882 when it attempts to firmware update every time. This setup used to work with older multilink but not with the new multilink. What is going on?
	I launched the command-line CPROGxx flash programmer, saw a window flicker up, and then disappear. How do I know what happened?
	The connection assistant dialog indicates that my Multilink or Cyclone is undetected even though I have connected the hardware to my USB port. What should I do?
	Where and how do I get the latest version of PEmicro's software, algorithms, utilities, or plug-ins?
	How do I activate my PEmicro software?
	I (or my company) have purchased software as part of our order; how do I download this software?
	Why do I see the Power Dialog warning when trying to debug or flash program my chip in PROG, ICD, UNIT, or 3rd party software like Codewarrior? How can I prevent this from happening?

Version Info & Release Notes>
Product	Version
PROG-HL-ARM	9.74.00.00
Release Notes: PROGACMP v9.74.00.00 11 April 2025 - PROGACMP now displays detected flash size when using generic SPI algorithms - Further improves reliability of updating Cyclone FX wifi firmware Device Updates [Infineon] Improves debug entry for TLE98xx devices [NXP] Improves IMXRT10xx debug entry [NXP] Updates IMXRT10xx and LPC55S36 generic SPI algorithms to prevent access past the end of flash [NXP] Updates KW45/K32W2480 run control to use hard reset to handle low power situations New Device Support [GigaDevice] Add GD32F5xx support ######################################################## PROGACMP v9.72.00.00 25 March 2025 - Adds wifi firmware update for Cyclone FX ARM Rev. C - Improves reliability of updating Cyclone FX wifi firmware - Improves reliability in finding Network Cyclones, particularly via Wifi - Fixes erase all non-blank sector (EN) command - Fixes initialization error when using older algorithms such as NXP S32K1xx Device Updates [Analog Devices] Fixes incorrect end address for bank 1 and increases overall programming speed for ADRF88xx algorithm [CVA Bluewhale] Add support for infoRegion, secure device, and unsecure device for CVM014x [Infineon] Fix CYT3 and CYT4 flash mapping and organization [MINDMOTION] Improve erase and option byte programming reliability for MM32SPIN0230 [NXP] Updates MCXA276 flash algorithm and flash ranges [NXP] Revert iMXRT1024 Default Algorithm to Internal Flash Algorithm [NXP] Fixes Quad Enable detection on IMXRT10xx generic SPI algorithms [SiLabs] Erase Entire Module command now uses MSC_MassErase instead of page erase [ST] Updates of BlueNRG-1 and BlueNRG-2 support files [ST] Fix STM32H745_47 bug with read protection erase New Device Support [INFINEON] Add support for the PSoC4 4100T Plus Family [NXP] Adds support for KW47 [NXP] Adds support for MCXW72 [NXP] Adds support for MCXA276 [NXP] Adds support for IMXRT1043/46 [ST] Add support for STM32N6x7 External SPI memory on Nucleo board [ST] Adds support for STM32C092x series [ST] Adds support for STM32C051x series [ST] Add support for STM32WL5 family [TI] Add MSPM0Gx51x device family support [Nuvoton] Add support for M0A2x family [YTMicro] Add YTM32B1LE1 Support [ZHIXIN] Add support for security to Z20M13 [ZHIXIN] Add 128KB/64KB and security support to Z20K11xN [ZHIXIN] Add support for security to Z20K11xM [Zhixin] Add support for security to Z20K14xMC [Infineon] Add support for CYT6 TRAVEO II with flash mapping and SFLASH ######################################################## PROGACMP v9.67.01.00 12 December 2024 -Multilink Firmware 11.52 for improved HW licensing PROGACMP v9.67.00.00 18 November 2024 -[ARM] Adds support for ADIv6 and improves JTAG retries Device Updates [ARM][Infineon] Fix Memory Map feature for CYT2 New Device Support [PROG][ICD][ARM] Adds S32N55 init support [TI] Add support for the CC2340R5 [NXP][MCXL] Adds MCXL144 final support [NXP][S32N55] Adds S32N55 support [ST][ARM] Add STM32H7RS internal flash support [MINDMOTION] Add support for MM32SPIN0230 [ARM][ST] Add support for the STM32WL33xx family [Geehy][ARM] Add Geehy APM32F107 Device Support [NXP][IMXRT7xx] Finalizes IMXRT7xx support ######################################################## PROGACMP v9.65.00.00 23 September 2024 Fix arm cortex EEPROM reading error Device Updates [ARM][PROG] Improve ARM debug entry for devices with dormant state [NXP][S32K3xx] Improve secure debug authentication scripts Add support for STM32U5 trustzone enabled. Add support for 0x0C00_0000 memory region [ARM][GIGADEVICE] Fixed GD32E235F6 algorithm load bug [ARM][GIGADEVICE] Fixed issue that prevented the GD32E23x algorithm from loading if SRAM parity check is enabled [TI][ARM] Fix bug with MSPM0 initial and unsecure support New Device Support [ARM][NXP] Add support for iMXRT1015 Generic FlexspiA algorithm [ARM][CVABlueWhale] Add support for CVM012x devices [NXP][MCXA] Adds support for MCXA133/132 [NXP][S32K36x] Finalizes S32K36x support [GIGADEVICE] Add support for GD32L235x series [GIGADEVICE] Add support for GD32E235x series [ST][ARM] Add Support For STM32H523/533 [ARM][ST] Add New STM32C0xx devices [ARM][Silergy] Add support for SA32B1x [Infineon][ARM] Add support for Infineon NGC1081 [Geehy][ARM] Add Geehy APM32F107 Device Support [Geehy][ARM] Add APM32F411 device support ######################################################## PROGACMP v9.57.01.00 02 August 2024 Device Updates - [NXP][S32K36x] Finalizes S32K36x support - [Renesas] Allow programming up to 1MB for S3Ax devices New Device Support - [GIGADEVICE] Add support for GD32E235x series - [Infineon][ARM] Add support for Infineon NGC1081 PROGACMP v9.57 03 July 2024 -Improves Cyclone detection in cases where there are multiple active network adapters -Skip firmware update option -[ARM][PROG] Adds Arm Debug Interface version 6 support (ADIv6.0) -[ARM] Fix issue with PU programming some bytes twice Device Updates -Fix IndieSemi 87200 algo problems -[NXP][RW612] Adds final run control support for RW612 -Add support for debug authentication with password for STM32H573x -[NXP][S32K3xx] Updates S32K39x/37x support -[NXP][S32K3xx] Updates SDAF files to version 1.2 -Improve RL78 debug mode entrance timing New Device Support -Add support for STM32H573 OBKeys -[ST][ARM] Add STM32WBA support -[YTMICRO] Add YTM32B1MC0 support -[YTMICRO] Add YTM32B1HA0 support -[ST][ARM] ST STM32U0xx Support Added -[ZhiXin][ARM] Add Z20M1343L Support -[NXP][MCXC] Adds run control for MCXC device family -[AUTOCHIPS] Add AC7803x support ######################################################## PROGACMP 9.52.0.0 May 31 2024 New Device Support - [GIGADEVICE] Add GD32H759xx - [ZhiXin][ARM] Add Z20K14xMS support - [AUTOCHIPS] Add AC7803x part numbers - [GIGADEVICE] Add support for GD32H7 series - [RENESAS][ARM] Add RA0E1 support - [Renesas][ARM] Add R7FA2A2AD Support - MSPM0L 16KB and 8KB support - [ARM][Geehy] Adding support for Geehy g32a1465 Apr 17 2024 - Adds support for ST .OBK files - Secure Boot Utility supports iMXRT117x. Also supports LPC55Sxx PRINCE mode - [ST] Adds support for STM32H56x password regression (TZ disabled) - [CVA Chip] Improves debug entry for CVM014x devices Device Updates - [ST] Adds support for programming OBKeys region of STM32H56x - [NXP] Updates LPC55Sxx PFR algorithms to include key provisioning - [NordicSemi] Fixed issue where watchdog was not being reset when connecting on nRF51 and nRF52 devices - [CVA Chip] Adds support for CVM011x data flash, 0x400 region and mass erase - [Autochips] Updates support for AC7840x 512KB variants New Device Support - [NXP] Adds support for MCXA18 devices - [TI] Adds support for MSPM0Lx22x devices - [Flagchip] Adds support for FC7240 devices ######################################################## PROGACMP 9.43.0.0 Feb 20 2024 - Adds MSPM0x factory reset support as unsecure support mass erase - [ST] Adds STM32H503 mass erase as a unsecure support type - [ARM] Fix connection issues with certain Atmel devices (SAME70, SAMV70) - Add unsecure support for MSPM0 devices to handle factory-reset with mass erase checkbox. - [TI] Init Support for MSPM0C Device Updates - [OMNIVISION] Update OMX14xx clock and PLL init code - Fix for MSPM0G erase, program, and verification - [NXP][MCXN] Updates MCXN23x to account for trustzone region - [NXP][S32K3XX] Updates algorithms to include verify checksum and dynamic erase - Adds STM32H5xx mass erase as a unsecure support type New Device Support - Add MSPM0C Support - [ST] Adds STM32H57x devices - [ST] Adds STM32H503 support - [RENESAS] Add support for RA8x family - [NXP][MCXN] Adds external spi flash algorithm to MCXN9xx and MCXN5xx ######################################################## PROGACMP 9.40.0.1 January 18 2024 - [NXP][S32K3xx] Adds Secure Debug for S32Kx8s devices Device Updates - [OMNIVISION] Update support of the OMX14xx family - Geehy G32A1445 bug fixes - [RENESAS] Add/Update support for RA4 (E1, T1) RA6 (T2, T3) - [ARM][Renesas] Updating support for the RA4M1 and RA4W1 - [Traveo II] Fix Dualbank algorithms and 4M algorithms New Device Support - GigaDevice GD32A503 Support - [RENESAS] Adds support for RA6-M4-M5-E1-E2 and RA4E2 - [Renesas][ARM] Adding support for the RA4M2 and RA4M3 - [ST] Adds BlueNRG-LPS Support - [ARM][Microchip] Adding support for the JH00/JH01 family of devices - [NXP][IMX] Adds octal alternate algorithm for IMXRT117x PROGACMP 9.40.0.0 8 December 2023 - Adds support for QB command for BIN file - [ARM] Device Selection Tree can now be filtered - Fix ignore overlap range handling - [PROG][ICD] Removes Anguilla Nano B0(MC56F817xx) support and only support B1 - Fix Prog Security handling for arm cortex devices - [PROG] Select User Options command will now start file selection from the last selected file directory Device Updates - [Renesas][ARM] Providing support for the RA4E2 - [NXP][MCXN11] Finalize support - [INFINEON] Update of the TLE984x algorithms - [NXP]S32M2xx] Adds final support - [TI] Improves debug entry for MSPM0G devices - [INFINEON] Fixes Infineon TLE98xx debug entry bug - [NXP][KW45x][k32W1480] Reverted manual entry of core debug components' addresses New Device Support - [INFINEON] Update of TLE987x support for devices with 3KB of SRAM - [INFINEON] Add TLE989x support - Support for MSPM0G variant of TI MSPMOx - [ARM][Microchip] Support for the PIC32CMxLx devices. - [SILABS] Adds EFR32xG28 support - [INFINEON] Add TLE986x algorithm - [INFINEON] Add TLE985x support - [NXP][LPC] Adds LPC864 support - [NXP][IMX] Adds IMXRT118x B0 final support - [NXP][ARM] Provide EAR support for MCXN11 - Adds Support for Silicon Labs EFR32xG27 - [YTMICRO] Add support for YTM32B1MD1 Series - [NXP][Kinetis] Adds support KE17Z512 devices - [ARM][OMNIVISION][OMX146N] Adding algorithm and - Add support for Geehy G32A1445 - Add v2 support for RA6M1 via IAR - Add support for CVA Bluewhale CVM014X ######################################################## PROGACMP 9.30.0.1 28 September 2023 Device Updates [NXP] KE1x [YT] YTM32B1ME0 New Device Support [YT] YTM32B1MD1 PROGACMP 9.30 26 September 2023 -Fix firmware update error for Multilink FX running old firmware Device Updates - Updates to TI CC26x2 devices - [Analog Devices] ADRF88xx - [NXP] S32K388 New Device Support - [Omnivision] Adds support for OmniVision OMX146N - [YTMICRO] Add support for YTM32B1ME0 Series - Addition of TI CC26x2x7 devices - [NXP] iMX11xx - [NXP] MCXN54xx, MCXN94xx - [NXP] MCXAx ######################################################## PROGACMP 9.25 25 August 2023 - Added CRC-32 Verify Checksum Support Device Updates [INFINEON] CY8C40xx, CY8C41xx [INFINEON] TraveoII [NXP] iMX [NXP] LPC55Sxx, LPC55xx [NXP MCNx [RASPBERRYPI] RP2040 clock init fix [SILICONLABS] EFR32FG23 STM32L5 Option bytes STM32L0 Read Protection Level 2 support New Device Support [FLAGCHIP] Add support for the FC7300 Series [INDIESEMI] IND100xx, IND872xx [YTMICRO] Add support for YTM32B1LE0 Series [ZHIXIN] M01xx * Multilink/Multilink FX firmware 11.22 * Cyclone LC/Cyclone FX firmware 11.29 ######################################################## PROGACMP 9.19 05 June 2023 -[Multilink_FX][Cyclone_FX] Improve boot time for Multink_FX Rev. D and Cyclone_FX Rev. C. Device Updates [GIGADEVICE] Update missing GD32F30x devices [ARM][STM] An update to the STM32F4 option byte algorithms for STVP-STM32 compatibility [ARM][GIGADEVICE] Update GD32L23x security protection user command [NXP][ARM] Adds Erase Object File Range for KW45x/K32W1480/MCXN9xx/5xx/LPC55Sxx [Infineon] [ARM] Adding "CA" series of CYT2B6 TraveoII devices New Device Support [YTMICRO] Adds support for the YTM32B1LD0 family * Multilink/Multilink FX firmware 11.22 * Cyclone LC/Cyclone FX firmware 11.22 ######################################################## PROGACMP 9.16 16 May 2023 [SiLabs] Allow recovery of bricked EFR32 Series 2 processors Add separate unsecure for EFR32 M33 devices that use DCI but do not have secure element Fixed bug loading certain algorithms for read-only memory Secure Boot Utility device updates Device Updates AutoChips AC780x, AC781x, AC784x Infineon PSOC6 Infineon TraveoII NXP LPC55xx, LPC55Sxx Renesas RA6x SiLabs BLuetooth, EFM32PG22, EFM32PG32, Proprietary, Zigbee ST ST32U5 TI MSPM0x New Device Support SiLabs EFR32xG24 Infineon TLE987x and TLE984x MindMotion MM32F0020B1 Nordic nRF91 * Multilink/Multilink FX firmware 11.09 * Cyclone LC/Cyclone FX firmware 11.20 ######################################################## PROGACMP v9.04.01.0 10 March 2023 New Device Support AutoChips AC7802x IndieSemi IND832xx Infineon XMC7000 MindMotion MM32F0140 NXP LPC8xx ST STM32H5 TI MSPM0x Device Updates Atmel SAMG Autochips AC780x Infineon TraveoII Nuvoton Nan1x2 NXP K32Wx NXP KWx Silicon Labs Bluetooth Silicon Labs Zigbee ST STM32U5 TI CC26xx PROGACMP v9.04 23 February 2023 New Device Support [Zhixin] [ARM] Added Z20K114, Z20K116, Z20K142, Z20K144, Z20K146 and Z20K148 [Renesas] [ARM] Added RA6M4 and RA6M5 [Autochips] [ARM] Added support for AC784x devices [Geehy][ARM] Added support for APM32S1xx and APM32E1xx devices. [Silergy] [ARM] Added support for SY7T231H, SY7T33H and SY7T309H [Nuvoton] [ARM] Added support for Nuvoton Nano 103 and 1x2 devices [MINDMOTION] Added support for MM32F0130 Family [INFINEON] Added PSoC4 4100S and 4100S Plus devices Device Updates [NXP] Fixed to LPC11x66 algorithms [Infineon] [ARM] Added dual bank support for TraveoII devices [STM] Fixed mass erase and sector erase flaw when target Vdd is less than 2.7V [SILABS] Fixed debug entry for EFR32BG22 and EFR32MG22 devices - Improved CM33 NXP Mailbox Handling - Added support for Unsecure MSP432xx - Added support for Overlay Data - Fixed EN command time out - Improved Cyclone Ethernet communication - Fixed PROG Configuration window refresh ################################################## PROGACMP v8.98.1 06 January 2023 New Device Support Geehy APM32Fxxx Flagchip FC4150F NXP DSC MCF56F84783 NXP Kinetis K32W1480 NXP Kinetis KW45xxx NXP LPC55S666 Raspberry Pi RP2040 8MB/16MB Device Updates Analog Devices ADRF88xx Infineon CY8C41xx Infineon CY8C6xxx NXP iMXRT1176 Renesas RA4x Renesas RA6x Silicon Labs EFM32PG23 Silicon Labs WGM160P Wi-Fi ST STM32G0 ST STM32H7 TI MSP432P4 USB-ML-ACP 10.99 firmware PROGACMP v8.98 11 Nov 2022 -Native support for USB ML Universal FX Rev D -Native support for USB ML Universal Rev E ################################################## PROG-HL-ARM Version 8.95.1.0 October 19 2022 New Device Support Analog Devices ADRF88xx GigaDevice GD32C10x GigaDevice GD32C11x GigaDevice GD32E11x GigaDevice GD32F4x0 Device Updates Atmel SAML GigaDevice GD32F4xx option byte bug fixes Infineon TraveoII Fix verify checksum command NXP iMX Winbond w25q128 for imxrt1171 Raspberry Pi Winbond W25Q16JV for RP2040 * Multilink/Multilink FX 10.99 ####################################################### PROG-HL-ARM Version 8.95.0.0 September 28 2022 New Device Support Raspberry Pi RP2040 Device Updates Add rest of Gigadevice GD32F4xx and option bytes Gigadevice GD32W51x option bytes IndieSemi 832xx MindMotion MM32SPIN NXP iMXRT117x NXP MWCTx NXP S32K3xx Renesas RA2x, RA4x, RA6x Renesas S1, S3, S5, S7 * Cyclone and Cyclone FX application 10.98 * Multilink/Multilink FX 10.98 * PROGACMP/CPROGACMP 8.95 ####################################################### PROG-HL-ARM Version 8.90.0.0 August 23 2022 New Device Support Geehy APM32F030xx GigaDevice GD32E103 NXP DSC MC56F806xx and MC56F807xx devices Nuvoton M48x OnSemi RSL15 Renesas R7FA devices Device Updates Dialog DA1458x/DA1468x rebranded to Renesas Indiesemi IND832xx iMX new external flash NordicSemi nRF52 new part numbers Nordic nRF53 ddf fix NXP SJA1110x external flash S32K14x ddf changes * Cyclone and Cyclone FX application 10.95 * PROGACMP/CPROGACMP 8.90 PROG-HL-ARM Version 8.84.2.0 July 8 2022 Bug Fixes, new features, and updates: New imxrt target support added to Secure Boot Utility New Device Support Dialog DA1458x/DA1468x Indiesemi IND832xx Nuvoton M251x/M252x/M254x/M256x/M258x Gigadevice GD32L23x Device Updates: Cypress CY861xx/CY862xx/CY863xx rebranded to Infineon Infineon TraveoII Nuvoton M031x/M032x NXP iMX NXP KEx SiliconLabs Bluetooth SiliconLabs EFM32PG22-Series-2 SiliconLabs Proprietary SiliconLabs Zigbee ST STM32C0 ST STM32H7 ST STM32L4 PROG-HL-ARM Version 8.84.1.0 June 9 2022 ** New Device Support -STM32C0xx -STM32G050x/STM32G060x/STM32G051x/STM32G061x -TI MSPM0x -Zhixin Z20K14x PROG-HL-ARM Version 8.84 May 9 2022 Adds SPI Diagnostic New Device Support -STM32U5xx -Renesas RA4x and RA6x -Nuvoton M031x and M032x -GD32F40x and GD32W5xx Updates ** -Mass Erase fix on STM32H7xxx ####################################################### PROG-HL-ARM Version 8.74.0.1 March 10 2022 New Device Support Giga Device GD32E50x, GD32F20x, GD32F3x0, Qorvo PAC52xx/PAC555xx NXP S32G3xx ST STM32U5 Device Updates Atmel SAML GigaDevice GD32F30x Infineon TraveoII sFlash and workFlash support Silicon Labs Add Device Information for Bluetooth, Proprietary, Zigbee_Thread Silicon Labs EFM32PG22-Series-2 ST Performance increase for STM32G4, STM32L5 NordicSemi nRF51, nRF52 NXP iMX NXP LPC55Sx NXP LPC 8xx * Multilink/Multilink FX 10.84 * Updates to Secure Boot Utility ####################################################### PROG-HL-ARM v8.74 January 21 2022 New Device Support - Atmel SAM4L fuse bits and user page - Autochips AC780x and AC781x - Cypress PSoC5 EEPROM - GigaDevice GD32F30x - Nordic Semi nRF5340 support - Nuvoton M453 (NuMicro) - NXP iMX11xx - NXP KEx - NXP LPC - NXP MWCTx - NXP S32Kxxx - NXP Sensors (PN7640) - Renesas Dialog Semi DA14531 (SmartBond) - Renesas RA2, RA2x, RA4x, RA6x - Renesas S1, S3, S5, S7 - Silicon Labs Bluetooth - Silicone Labs EFM32PG22 - Silicon Labs EFR32 Blue Gecko, Flex Gecko, Mighty Gecko - Silicon Labs Proprietary - Silicon Labs Wifi - Silicon Labs Zigbee - ST Micro STM32F7, STM32H7 - ST Micro STM32WB option bytes , STM32WL - TI CC26xx eclipse ide fix - ZhiXin Z20K11xM * Cyclone and Cyclone FX application 10.89 * PROGACMP/CPROGACMP 8.74 #################################################### PROG-HL-ARM v8.62 Sept 17 2021 - Fixes licensing issue of some multilinks #################################################### PROG-HL-ARM / PROGACMP 8.59 July 22 2021 New Device Support or Updates: Cypress FM3 CY9Ax10A devices Infineon TraveoII CYT2B6 and CYT2BL Maxim MAX32620/MAX32621 ST STM32G051 ST STM32WLEx option bytes Updates pehardwarelicensemanager and dll PROG/CPROG hardware licensing bug fixed * Cyclone and Cyclone FX application 10.79 * PROGACMP/CPROGACMP 8.59 #################################################### PROG-HL-ARM / PROGACMP 8.47.0.1 July 7 2021 New Device Support or Updates: GigaDevice GD32E23x PSOC4 and TRAVEO II now listed under Infineon Zhixin Z20K11xM ST STM32F4 option bytes bug fix #################################################### PROG-HL-ARM / PROGACMP 8.47 June 16 2021 Cypress CY9AF1A2L MindMotion MM32SPIN ST STM32G0 ST STM32F3 ST BlueNRG-LP ST STM32G0B1 ST STM32G49, STM32G4A NXP 88MW3xx NXP Kinetis KE NXP S32G2xx NXP SJA1110x Renesas RA2 Renesas RA2, RA4M2 TI CC2642R-Q1 - OSBDM Driver Updates #################################################### PROG-HL-ARM / PROGACMP 8.47 May 7 2021 New Device Support or Updates: Cypress FM3 CY9BF410/MB9BF410 Cypress FM3 CY9BF510/MB9BF510 MindMotion MM32SPIN0x NXP S32G2xx Renesas Synergy S7 and S5 ST STM32L1 ST STM32WL Update to CPROGACMP user guide Cyclone/Cyclone FX firmware updated to 10.75 #################################################### PROG-HL-ARM / PROGACMP 8.44 April 13 2021 New Device Support or Updates: - NXP SJA1110 - NXP iMXRT1166/65/65 - NXP K32Wx - NXP S32K1xx, K2xx, S32V23x, VF6xx - Cypress 4100S Plus Automotive - Renesas Synergy S7 and S5 - Atmel SAM4Cx, SAM4Sx, SAMR34x - NXP 88MW3xx - SiLabs EFM32-Gecko, EFM32-Happy-Gecko - SiLabs EFM32-Tiny-Gecko, EFM32-Zero-Gecko - SiLabs EFR32-Blue-Gecko, EFR32-Mighty-Gecko - SiLabs Wi-Fi - NordicSemi nRF52833 - secureBootUtility New Features - Security features for Renesas Synergy devices Bug Fixes - Algorithm initialization in Silicon Labs EFM32TG devices - Mass erase for Silicon Labs Wifi devices Multilink/Multilink FX firmware updated to 10.70 #################################################### PROG-HL-ARM / PROGACMP 8.35 February 19 2021 This is a minor update of the previous 8.35 release. New Device Support or Updates: GigaDevice GD32F103 ON Semiconductor RSL10 #################################################### PROGACMP v8.35 February 9 2020 Updates to secureBootUtility New Device Support or Updates: Atmel ATSAMx devices ATMEL SAMR30 devices Cypress PSoC5 devices Cypress 62 and 63 Cypress TaveoII NXP Kinetis 88MW32X Support NXP iMXRT NXP K32Wx NXP Kinetis KEx NXP LPC55Sxx NXP LPC55xx NXP SJA1110x NXP NCJ29D5 Silicon Lab EFR32BG22x and EFR32BGM210 devices Silicon Labs WGM160P022KGA2 and BGM220SC22WGA2 SiLabs EFR32MG12 and EFR32MG13 SiLabs EFM32GG SiLabs EFR32FG STMicroelectronics BlueNRG-1, BlueNRG-2 STMicro STM32H723/25/30 support STM32L5 flash support Cyclone/Cyclone FX firmware updated to 10.67 #################################################### PROGACMP v8.22.00.00 November 5, 2020 New Features or Bug Fixes Adds Secure Boot Utility, which helps users enable secure boot on NXP i.MXRT processors Adds support for secure JTAG on NXP i.MXRT processors Cyclone/Cyclone FX firmware updated to 10.63 #################################################### PROGACMP v8.05 August 5 2020 Bug fixes: Bug fixes to HW licensing utility New Device Support: S32K2TV STM32L4P STM32L4Q Various Cypress CYBLE devices (including Cypress CYBLE-416045-02 and CYBLE-022001) Various MIMXRT devices ST STM32F7 option bytes ST STM32H7 option bytes Device Updates: STM32F2 flash and option byte algorithms STM32F4 flash and option byte algorithms Improves debug mode entry for NXP CortexM33 [REDPINE] Add Erase Range Sector command to RS14100 Cypress PSoC4 CYBLE Cypress CY8C63xx Cypress CY8C62xx Remove Cypress CY8C61xx folder STM32F2 Option Bytes Some STM32F4 Option Bytes STM32G0 Option Bytes STM32H7A_Bx STM32F72x and STM32F74x Option Bytes ST SPC572L Shadow Silicon Labs EFR32 Blue Gecko TI CC3220(MOD) Duplicate STM8 algorithms removed NXP K32Wx NXP LPC540xx and LPC54S0xx NXP S32K1xx NXP Sensors Cyclone/Cyclone FX firmware updated to 10.54 ####################################################### PROGACMP v7.95 19 May 2020 New Device Support -TI 32xx -STM32H7Ax/Bx -STM32F2xx Option Bytes -STM32F40/1x Option Bytes -Silicon Labs EFR32MG1B/1P/1V -Silicon Labs EFR32FG1P/1V -NXP sensors nxp_jn5188/89 -NXP sensors nxp_qn9030/90 -NXP K32Wx nxp_k32w041/61 -Cypress CYBLE-416045 -Cypress CY8C6357LQI #################################################### PROGACMP v7.89 12 March 2020 - USB-ML-UNIVERSAL 10.46 - USB-ML-UNIVERSAL-FX 10.46 New Device Support - [Cypress] Traveo II Bug Fixes - [NXP] KE02 Program Bytes and Program Words command - [Cypress] PSoC4 devices utilizes Erase All NVL Command - IMXRT5xx and IMXRT6xx can now boot from external SPI - IMXRT595S and IMXRT685S uses hard reset for vector catching - Reset fix for K22FX512 that does not have a reset line connected - PU command no longer tries to read a block of flash while writing another block #################################################### PROGACMP v7.85 22 January 2020 - USB-ML-UNIVERSAL 10.42 - USB-ML-UNIVERSAL-FX 10.42 #################################################### PROGACMP v7.78 18 December 2019 New Features - [ARM] Program User Options New Device Support - [STM] STML4 Option bytes - USB-ML-UNIVERSAL firmware 10.36 - USB-ML-UNIVERSAL-FX firmware 10.36 - CYCLONE and CYCLONE FX firmware 10.41 #################################################### PROGACMP v7.69.00.00 November 4, 2019 Bug Fixes -[NXP] LPC55xx A1 rev blank device fix -[CYPRESS] Reset + Go fix to get Cypress devices out of debug mode -[NXP] S32K2xx soft reset toggle -[CYPRESS] Improved debug entry for PSoC 4 and 6 (Power toggle is now automatic for devices with no external reset pin) -[CYPRESS] PSoC 4 Chip Protect New Features -[ARM] Init_none parsing to allow for initwrites in any algorithm -[ARM] Generic Custom Trim New Device Support -[Cypress] CYPD317x (CCG3PA) family - USB-ML-UNIVERSAL firmware 10.36 - USB-ML-UNIVERSAL-FX firmware 10.36 - CYCLONE and CYCLONE FX firmware 10.36 #################################################### PROGACMP v7.61.00.00 September 23, 2019 - General bug fixes and improvements - New Device Support Atmel SAMD2x NXP i.MXRT11xx NXP K32L2Bxx NXP LPC540xx/LPC54S0xx OTP NXP SJA11110x ST STM32G4 ST STM32WB TI CC13xx #################################################### PROGACMP v7.48.00.00 July 18, 2019 Bug Fixes [SiliconLabs] Improves debug entry and unsecure for EFR32, EFM32JG, and EFM32PG devices [SiliconLabs] New algorithms with voltage scaling fix Adds .sx to the file filter [ARM] NXP LPC11xxx fixes [ARM] Prevents device from reentering debug mode in some cases when using RE GO in your image [ARM] LPC55xx run control fix New Features [ARM] Same5x User Page support New Device Support [ARM] Cypress PSoc 6 devices [ARM] TI CC3200 [ARM] Atmel SAM5x/SAMD5x [ARM] STM STM32L4xxxG and STM32L4xxxI with option bytes - USB-ML-UNIVERSAL firmware 10.26 - USB-ML-UNIVERSAL-FX firmware 10.26 - CYCLONE and CYCLONE FX firmware 10.27 #################################################### PROGACMP v7.00.00.00 October 8, 2018 - Allows debug entry on KVx device if NMI pin is low - Fixes PSoC5 Test Mode key and address - General bug fixes #################################################### PROGACMP v6.94.00.00 22 August 2018 - Updated support for Security for SiLabs and Atmel devices - Support for Intel Extended Address HEX files - Support for USB ML Universal REV D - Support for USB ML Universal FX REV C - ML FX Power up delay fix #################################################### PROGACMP v6.71.00.00 29 December 2017 - GO command in CPROGACMP will disconnect debug signals and allows the chip to enter run mode - Adds support for Silicon Labs EZR32 - Adds support for Infineon XMC1000 series - Adds support for Cypress PSoC 5 #################################################### PROGACMP v6.22.00.00 16 February 2017 - Includes WinDriver 12.4 to support Windows 10 Secure boot - CPROG now returns an exit code of 1 if the program is closed prematurely instead of 0 - USB-ML-UNIVERSAL 9.81 firmware - USB-ML-UNIVERSAL-FX 9.72 firmware #################################################### PROGACMP v5.74.00.00 16 June 2016 - Adds Nordic Semiconductor support for Arm Cortex devices - Improves debug entry for Cypress PSoC 4 processors - Adds Chip Protect command (Cypress security) - Fixes communications problems with LPC1769 #################################################### PROGACMP v5.74.00.00 8 January 2016 - Support for ELF/DWARF 3 and 4, and 64-bit ELF - Includes WinDriver 12.2 to support Windows 10 #################################################### PROGACMP v5.71.00.00 23 November 2015 - Fixes communications issue with brand new Silicon Labs processors which are factory programmed with a special bootloader application - The "GO" command now toggles the reset signal and leaves the processor running without re-entering debug mode - Adds support for Atmel SAMC and SAMV7 processors ##################################################### PROGACMP v5.58.00.00 9 October 2015 - Adds NXP LPC12xx flash support - Adds ARM Cortex-M support for the following vendors: Cypress, Maxim - Improves debug entry procedure for Atmel processors - Adds Freescale KV5x flash support - Changes reset delay option to apply to both rising and falling edges of reset - Improves debug entry procedure for Freescale KEx devices by disabling NMI interrupt before soft reset ##################################################### PROGACMP v5.43.00.00 19 June 2015 - Adds ARM Cortex-M support for the following vendors: Atmel, Infineon, NXP, Silicon Labs, STMicroelectronics, and Texas Instruments - New 9.38 firmware for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B - Turns off debug mode of target processors after programming operations are complete - Adds JTAG Daisy Chain support ##################################################### PROGACMP v5.21.00.00 6 February 2015 - New v9.33 bootloader for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B - New v9.33 firmware for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B - Fixed issue where some ELF data regions were skipped during programming ##################################################### PROGACMP v5.15.01.00 11 November 2014 - Users must now specify the exact target processor using the new Device Selection tree in the Connection Assistant (PROG) or through the :DEVICE command (CPROG). - The higher performance pipeline algorithms are now used by default. - Now properly detects Cortex-M0 cores instead of displaying "Unknown core" - Fixes load error when trying to program certain IAR .out files ##################################################### PROGACMP v5.13.02.00 24 October 2014 - Adds support for PEmicro USB-ML-UNIVERSAL-FX Rev B - Adds support for PEmicro USB-ML-UNIVERSAL Rev C - Adds support for Freescale Kinetis KE Series via commandline parameters PROGACMP v5.04.0.0 02 July 2014 - Automatically retries debug communications on failure - Command-line version (CPROGACMP) automatically unsecures the processor if it is secured - Fixes user functions asking for unnecessary parameters - Supports pipelined algorithms PROGACMP v3.0.0.22 23 September 2013 - Added Tracelink firmware
PROG-HL-12Z	9.65
Release Notes: PROG12Z v9.65 12 December 2024 -Multilink Firmware 11.52 for improved HW licensing ################################################## PROG12Z v9.57 03 July 2024 -Improves Cyclone detection in cases where there are multiple active network adapters -Skip firmware update option ################################################## PROG12Z v9.04 23 February 2023 - Added support for Overlay Data - Fixed EN command time out - Improved Cyclone Ethernet communication - Fixed PROG Configuration window refresh ################################################## PROG12Z v8.98 11 Nov 2022 -Native support for USB ML Universal FX Rev D -Native support for USB ML Universal Rev E ################################################## PROG12Z v8.62 Sept 17 2021 - Fixes licensing issue of some multilinks #################################################### PROG12Z v7.95.0.1 August 5 2020 - Bug fixes to HW licensing utility - Cyclone/Cyclone FX firmware updated to 10.54 #################################################### PROG12Z v7.95 19 May 2020 - Support for HW licensing #################################################### PROG12Z v7.85 22 January 2020 - USB-ML-UNIVERSAL 10.42 - USB-ML-UNIVERSAL-FX 10.42 #################################################### PROG12Z v7.78 18 December 2019 - USB-ML-UNIVERSAL 10.18 - USB-ML-UNIVERSAL-FX 10.18 - CYCLONE UNIVERSAL[FX] 10.41 - New commands: CHANGEV, RELAYSON, RELAYSOFF #################################################### PROG12Z v6.94.00.00 26 July 2018 - Support for USB ML Universal Rev D - Support for USB ML Universal FX Rev C - Support for Intel HEX Extended Address Memory #################################################### PROG12Z v5.74.00.00 8 January 2016 - Support for ELF/DWARF 3 and 4, and 64-bit ELF - Includes WinDriver 12.2 to support Windows 10 #################################################### PROG12Z v5.25.00.00 23 March 2015 - Includes new drivers v11.7 - Includes new firmware v9.35 for USB-ML-Universal Rev C and USB-ML-Universal FX Rev B, which improves BDM communication with 9(S)12(X) targets and high speed algorithms #################################################### PROG12Z v5.21.00.00 6 February 2015 - New v9.33 bootloader for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B - New v9.34 firmware for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B - Fixed issue where some ELF data regions were skipped during programming ##################################################### PROG12Z v5.18.00.00 5 December 2014 - Fixed OSBDM support ##################################################### PROG12Z v5.13.02.00 30 October 2014 - Adds new OSBDM firmware - Adds new Cyclone Pro Firmware 8.63 14 October 2014 - Adds support for USB-ML-UNIVERSAL-FX Rev B - Adds support for USB-ML-UNIVERSAL Rev C - Fixes illegal user command bug with some HC912 algorithms PROG12Z v2.00.00.01 7 December 2012 - Update documentation PROG12Z v2.00 3 February 2012 Version 2.00 adds the following: - Adds support for Multilink Universal FX Rev A(USB-ML-UNIVERSAL-FX) development tool Version 1.96.00.00 4 May 2010 Version 1.90 adds the following: Now compatible with Windows XP/Vista/7 64-bit OS Version 1.70 adds the following: Fixed display problem on paged EEProm. Fixed verify module command for certain older 912 paged devices. Version 1.62 Windows XP/2000 only (Windriver 6.03)
PROG-HL-16Z	9.65
Release Notes: PROG16Z v9.65 12 December 2024 -Multilink Firmware 11.52 for improved HW licensing ################################################## PROG16Z v9.57 03 July 2024 -Improves Cyclone detection in cases where there are multiple active network adapters -Skip firmware update option ################################################## PROG16Z v9.16 15 May 2023 - Includes 11.09 firmware that fixes HW licensing bug that prevents your license from "sticking" to the Multilink FX in some cases. ################################################## PROG16Z v9.04 23 February 2023 - Added support for Overlay Data - Fixed EN command time out - Improved Cyclone Ethernet communication - Fixed PROG Configuration window refresh ################################################## PROG16Z v8.98 11 Nov 2022 -Native support for USB ML Universal FX Rev D -Native support for USB ML Universal Rev E ################################################## PROG16Z v8.62 Sept 17 2021 - Fixes licensing issue of some multilinks #################################################### PROG16Z v7.95.0.1 August 5 2020 - Bug fixes to HW licensing utility #################################################### PROG16Z v7.95 19 May 2020 - Support for HW licensing #################################################### PROG16Z v7.85 22 January 2020 - USB-ML-UNIVERSAL 10.42 - USB-ML-UNIVERSAL-FX 10.42 #################################################### PROG16Z 6.94.00.00 26 July 2018 - Version 9.94 firmware and bootloader for USB-ML-Universal-FX Rev C - Support for Intel HEX Extended Address Memory #################################################### PROG16Z 6.74.00.00 22 January 2018 - Driver 12.7 supports Windows 10 Secure boot - Version 9.40 firmware and bootloader for USB-ML-Universal FX Rev B #################################################### PROG16Z v5.74.00.00 8 January 2016 - Support for ELF/DWARF 3 and 4, and 64-bit ELF - Includes WinDriver 12.2 to support Windows 10 #################################################### PROG16Z v5.21.00.00 4 February 2015 - New v9.33 firmware and bootloader for USB-ML-Universal FX Rev B - Fixed issue where some ELF data regions were skipped during programming ########################################################## PROG16Z 5.13.02.00 31 October 2014 - Adds support for Multilink Universal FX Rev B - Fixes illegal user command bug with some HC16 algorithms ########################################################## PROG16Z v2.22 2 February 2012 2.22 adds the following: -Adds support for Multilink Universal FX Rev A (USB-ML-UNIVERSAL-FX) development tool ########################################################## PROG16Z v2.16 2.16 adds the following: - Tested Windows 7 64 bit support ########################################################## Version 2.00 Release Notes - Support Added for USB-ML-16/32
PROG-HL-32Z	9.65
Release Notes: PROG32Z v9.65 12 December 2024 -Multilink Firmware 11.52 for improved HW licensing ################################################## PROG32Z v9.57 03 July 2024 -Improves Cyclone detection in cases where there are multiple active network adapters -Skip firmware update option ################################################## PROG32Z v9.16 15 May 2023 - Includes 11.09 firmware that fixes HW licensing bug that prevents your license from "sticking" to the Multilink FX in some cases. - Many updated .32p files ################################################## PROG32Z v9.04 23 February 2023 - Added support for Overlay Data - Fixed EN command time out - Improved Cyclone Ethernet communication - Fixed PROG Configuration window refresh ################################################## PROG32Z v8.98 11 Nov 2022 -Native support for USB ML Universal FX Rev D -Native support for USB ML Universal Rev E ################################################## PROG32Z v8.62 Sept 17 2021 - Fixes licensing issue of some multilinks #################################################### PROG32Z v7.95.0.1 August 5 2020 - Bug fixes to HW licensing utility #################################################### PROG32Z v7.95 19 May 2020 - Support for HW licensing #################################################### PROG32Z v7.85 22 January 2020 - USB-ML-UNIVERSAL 10.42 - USB-ML-UNIVERSAL-FX 10.42 #################################################### PROG32Z 6.94.00.00 23 July 2018 - Version 9.94 firmware and bootloader for USB-ML-Universal FX Rev C - Support for Intel HEX Extended Address Memory #################################################### PROG32Z 6.74.00.00 17 January 2018 - Driver 12.7 supports Windows 10 Secure boot - Version 9.40 firmware and bootloader for USB-ML-Universal FX Rev B #################################################### PROG32Z v5.74.00.00 8 January 2016 - Support for ELF/DWARF 3 and 4, and 64-bit ELF - Includes WinDriver 12.2 to support Windows 10 #################################################### PROG32Z v5.21.00.00 4 February 2015 - Version 9.33 firmware and bootloader for USB-ML-Universal FX Rev B - Fixed issue where some ELF data regions were skipped during programming PROG32Z 5.13.02.00 30 October 2014 - Adds support for USB-ML-UNIVERSAL-FX Rev B 19 September 2014 - Improves ELF file load times PROG32Z v3.24.00.00 30 April 2014 3.24.00.00 adds the following: - Adds support for USB-ML-UNIVERSAL-FX Rev B. PROG32Z v2.20.00.01 2 February 2012 2.20.00.01 adds the following: - Adds support for Multilink Universal FX (USB-ML-UNIVERSAL-FX Rev A) development tool Version 2.15 Release notes: - This release supports Windows 7/XP/Vista 32/64 bit as well as Windows 2000/XP 32-bit. PEmicro's parallel port interfaces are not compatible with Windows Vista/7. Version 2.00 Release Notes: - Support Added for USB-ML-16/32
PROG-HL-CFV1	9.65
Release Notes: PROGCFV1 v9.65 12 December 2024 -Multilink Firmware 11.52 for improved HW licensing ################################################## PROGCFV1 v9.57 03 July 2024 -Improves Cyclone detection in cases where there are multiple active network adapters -Skip firmware update option ################################################## PROGCFV1 v9.04 23 February 2023 - Added support for Overlay Data - Fixed EN command time out - Improved Cyclone Ethernet communication - Fixed PROG Configuration window refresh ################################################## PROGCFV1 v8.98 11 Nov 2022 -Native support for USB ML Universal FX Rev D -Native support for USB ML Universal Rev E ################################################## PROGCFV1 v8.62 Sept 17 2021 - Fixes licensing issue of some multilinks #################################################### PROGCFV1 8.47 May 7 2021 cprogcfv1 auto-unsecure parameter now works properly Cyclone/Cyclone FX firmware 10.75 Multilink/Multilink FX firmware 10.70 #################################################### PROGCFV1 v7.95.0.1 August 5 2020 - Bug fixes to HW licensing utility - Cyclone/Cyclone FX firmware updated to 10.54 #################################################### PROGCFV1 v7.95 19 May 2020 - Support for HW licensing #################################################### PROGCFV1 v7.85 22 January 2020 - USB-ML-UNIVERSAL 10.42 - USB-ML-UNIVERSAL-FX 10.42 #################################################### PROGCFV1 v6.94.00.00 25 July 2018 - Support for USB ML Universal Rev D - Support for USB ML Universal FX Rev C - Support for Intel HEX Extended Address Memory #################################################### PROGCFV1 v5.74.00.00 8 January 2016 - Support for ELF/DWARF 3 and 4, and 64-bit ELF - Includes WinDriver 12.2 to support Windows 10 #################################################### PROGCFV1 v5.21.00.00 24 February 2014 - New v9.33 bootloader for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B - New v9.34 firmware for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B - New 31.26 OSBDM firmware - Fixed issue where some ELF data regions were skipped during programming ##################################################### PROGCFV1 v5.13.02.00 15 October 2014 - Adds support for USB-ML-UNIVERSAL-FX Rev B - Adds support for USB-ML-UNIVERSAL Rev C
PROG-HL-CFZ	9.65
Release Notes: PROGCFZ v9.65 12 December 2024 -Multilink Firmware 11.52 for improved HW licensing ################################################## PROGCFZ v9.57 03 July 2024 -Improves Cyclone detection in cases where there are multiple active network adapters -Skip firmware update option PROGCFZ v9.19 06 June 2023 - Fix MCF528x bug for setups that have external flash connected to any chip select other than CS0 - many new algorithms for 523x_7x_8x_not72, cs=cs1 setups - firmware that fixes HW licensing bug that prevents your license from "sticking" to the Multilink FX in some cases. [MULTILINK] 11.22 firmware [CYCLONE] 11.22 firmware ################################################## PROGCFZ v9.04 23 February 2023 - Added support for Overlay Data - Fixed EN command time out - Improved Cyclone Ethernet communication - Fixed PROG Configuration window refresh ################################################## PROGCFZ v8.98 11 Nov 2022 -Native support for USB ML Universal FX Rev D -Native support for USB ML Universal Rev E ################################################## PROGCFZ v8.62 Sept 17 2021 - Fixes licensing issue of some multilinks #################################################### PROGCFZ v7.95.0.1 August 5 2020 - Bug fixes to HW licensing utility - Cyclone/Cyclone FX firmware updated to 10.54 #################################################### PROGCFZ v7.95 19 May 2020 - Support for HW licensing #################################################### PROGCFZ v7.85 22 January 2020 - USB-ML-UNIVERSAL 10.42 - USB-ML-UNIVERSAL-FX 10.42 #################################################### PROGCFZ v7.78 18 December 2019 - CYCLONE/CYCLONE FX 10.41 ################################################### PROGCFZ v7.71.00.00 12 November 2019 - Fixes a programming error when double buffering is enabled for Multilink/Multilink FX that was introduced after version 5.48 - New commands: ChangeV (cyclone only), RelaysOn, RelaysOFF - USB ML Universal Rev D 10.18 - USB ML Universal FX Rev C 10.18 - CYCLONE/CYCLONE FX 10.37 ################################################### PROGCFZ v6.94.00.00 25 July 2018 - Support for USB ML Universal Rev D - Support for USB ML Universal FX Rev C - Support for Intel HEX Extended Address Memory ################################################### PROGCFZ v6.22.00.00 6 February 2017 - Includes WinDriver 12.4 to support Windows 10 Secure boot - CPROG now returns an exit code of 1 if the program is closed prematurely instead of 0 - USB-ML-UNIVERSAL 9.81 - USB-ML-UNIVERSAL-FX 9.60 #################################################### PROGCFZ v5.74.00.00 8 January 2016 - Support for ELF/DWARF 3 and 4, and 64-bit ELF - Includes WinDriver 12.2 to support Windows 10 #################################################### PROGCFZ v5.48.00.00 17 July 2015 - Updated firmwares v9.37 for USB-ML-Universal Rev C - Updated firmware 7.89 for Cyclone Max - Fixed programming error with any Multilinks if double buffering was enabled #################################################### PROGCFZ v5.21.00.00 22 January 2015 - Updated firmwares v9.33 for USB-ML-Universal - Updated firmwares v9.33 for USB-ML-Universal FX - Fix issue where some ELF data regions are skipped during programming #################################################### PROGCFZ v5.13.02.00 30 October 2014 - Adds updated OSBDM firmware - Adds support for USB-ML-UNIVERSAL Rev C 19 September 2014 - Faster loading of ELF files PROGCFZ v3.24.00.00 30 April 2014 - Adds support for USB-ML-UNIVERSAL-FX Rev B. PROGCFZ v3.0.0.22 23 September 2013 - Adds support for Tracelink PROGCFZ v1.93 1 February 2012 1.93 adds the following: -Adds support for Multilink Universal FX (USB-ML-UNIVERSAL-FX Rev A) development tool
PROG-HL-HCS08	9.65
Release Notes: PROGHCS08 v9.65 12 December 2024 -Multilink Firmware 11.52 for improved HW licensing ################################################## PROGHCS08 v9.57 03 July 2024 -Improves Cyclone detection in cases where there are multiple active network adapters -Skip firmware update option ################################################## PROGHCS08 v9.04 23 February 2023 - Added support for Overlay Data - Fixed EN command time out - Improved Cyclone Ethernet communication - Fixed PROG Configuration window refresh ################################################## PROGHCS08 v8.98 11 Nov 2022 -Native support for USB ML Universal FX Rev D -Native support for USB ML Universal Rev E ################################################## PROGHCS08 v8.62 Sept 17 2021 - Fixes licensing issue of some multilinks #################################################### PROGHCS08 v7.95.0.1 August 5 2020 - Bug fixes to HW licensing utility - Cyclone/Cyclone FX firmware updated to 10.54 #################################################### PROGHCS08 v7.95 19 May 2020 - Support for HW licensing #################################################### PROGHCS08 v7.85 22 January 2020 - USB-ML-UNIVERSAL 10.42 - USB-ML-UNIVERSAL-FX 10.42 #################################################### PROGHCS08 v6.94.00.00 25 July 2018 - Support for USB ML Universal Rev D - Support for USB ML Universal FX Rev C - Support for Intel HEX Extended Address Memory ################################################### PROGHCS08 v6.71.00.00 3 January 2018 - Improve the GO command in CPROG (no debug re-entry on reset) #################################################### PROGHCS08 v6.22.00.00 28 September 2017 - v9.81 firmware for USB-ML-UNIVERSAL Rev D - v8.69 firmware for cyclone pro rev c - v9.80 firmware for Cyclone Universal/FX - CPROG now returns an exit code of 1 if the program is closed prematurely instead of 0 - WinDriver 12.4 to support Windows 10 1607 Secure Boot #################################################### PROGHCS08 v5.74.00.00 8 January 2016 - Support for ELF/DWARF 3 and 4, and 64-bit ELF - Includes WinDriver 12.2 to support Windows 10 #################################################### PROGHCS08 v5.58.00.00 11 September 2015 - v9.40 firmware for USB-ML-UNIVERSAL Rev C which improves USB 1.1 reliability - v9.40 firmware for USB-ML-Universal FX Rev B which improves USB 1.1 reliability - Now displays the correct address for the trim register in the status window after the trim value is programmed. ##################################################### PROGHCS08 v5.25.00.00 26 March 2015 - v9.35 firmware for USB-ML-UNIVERSAL Rev C which improves communication with BDMV4 targets such as 9S12A64 - v9.35 firmware USB-ML-Universal FX Rev B which fixes a power on reset dialog problem and improves connection reliability - Jungo Drivers 11.7 ##################################################### PROGHCS08 v5.21.00.00 10 February 2014 - New v9.33 bootloader for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B - New v9.34 firmware for USB-ML-UNIVERSAL Rev C and USB-ML-Universal FX Rev B - New 31.26 OSBDM firmware - Fixed issue where some ELF data regions were skipped during programming ##################################################### PROGHCS08 5.13.02.00 15 October 2014 - Adds support for USB-ML-UNIVERSAL-FX Rev B - Adds support for USB-ML-UNIVERSAL Rev C ##################################################### PROGHCS08 v1.79 28 November 2012 1.79 adds the following: - Adds full support for HCS08 PT/PA/PL devices. PROGHCS08 v1.78 2 February 2012 1.78 adds the following: - Adds support for Multilink Universal FX (USB-ML-UNIVERSAL-FX) development tool PROGHCS08 1.70 June 2010 - Provides support for custom trim. - Tested Windows 7 32 bit and 64 bit support(WinDriver 10.10)
PROG-HL-PPCNEXUS	9.65
Release Notes: PROGPPCNEXUS v9.65 12 December 2024 -Multilink Firmware 11.52 for improved HW licensing ################################################## PROGPPCNEXUS v9.57 03 July 2024 -Improves Cyclone detection in cases where there are multiple active network adapters -Skip firmware update option ################################################## PROGPPCNEXUS v9.04 23 February 2023 - Added support for Overlay Data - Fixed EN command time out - Improved Cyclone Ethernet communication - Fixed PROG Configuration window refresh ################################################## PROGPPCNEXUS v8.98 11 Nov 2022 -Native support for USB ML Universal FX Rev D -Native support for USB ML Universal Rev E ################################################## PROGPPCNEXUS v8.62 Sept 17 2021 - Fixes licensing issue of some multilinks #################################################### PROGPPCNEXUS v7.95.0.1 August 5 2020 - Bug fixes to HW licensing utility - Cyclone/Cyclone FX firmware updated to 10.54 #################################################### PROGPPCNEXUS v7.95 19 May 2020 - Support for HW licensing #################################################### PROGPPCNEXUS v7.85 22 January 2020 - USB-ML-UNIVERSAL 10.42 - USB-ML-UNIVERSAL-FX 10.42 #################################################### PROGPPCNEXUS v7.59.00.00 19 September 2019 - Algo fix on SPC56xPxx - Algo fix on SPC58EC60 - Algo fix on MPC574xP - Support for Disabling Fast memory Reads. Useful for UTEST memory reads ##################################################### PROGPPCNEXUS v6.94.00.00 26 July 2018 - Support for USB ML Universal Rev D - Support for USB ML Universal FX Rev C - Support for Intel HEX Extended Address Memory ######################################################## PROGPPCNEXUS v6.71.00.00 29 December 2017 - Adds support for SPC574Sxx, SPC58xNxx, MPC5744C/MPC5745C, SC667xxx, SPC584Bxx - Adds uncensor for MPC574xP devices ######################################################## PROGPPCNEXUS v6.22.00.00 27 December 2016 - Pipelined Algorithms for PPCNEXUS targets ######################################################## PROGPPCNEXUS v6.9.00.00 11 October 2016 - Adds support for MPC5748G cut 3 - Support for 256-bit censorship password - GO command in CPROG no longer re-enters BKGD nor setup MMU again. ######################################################## PROGPPCNEXUS v5.93.00.00 16 June 2016 - New device support for S32R274, SPC582B60, SPC58EC80, SPC570S50, SPC574K72 - Adds support for SPC58NE84 cut 2.0 - Adds support for SPC564B64 cut 2.0 - Auto-attempt default censorship password of factory-censored MPC5775K cut 2.0+ ######################################################## PROGPPCNEXUS v5.74.00.00 8 January 2016 - Support for ELF/DWARF 3 and 4, and 64-bit ELF - Includes WinDriver 12.2 to support Windows 10 #################################################### PROGPPCNEXUS v5.60.00.00 25 September 2015 - Fixes MPC5517 settings ######################################################## PROGPPCNEXUS v5.57.00.00 2 September 2015 - Cyclone Max firmware 7.90 - Multilink Universal firmware 9.40 - Multilink Universal FX firmware 9.40 ######################################################## PROGPPCNEXUS v5.48.00.00 14 July 2015 - Enter debug mode when device reaches Reset Escalation - Censorship support for MPC577xK ###################################################### PROGPPCNEXUS v5.37.00.00 21 April 2015 - Adds support for SPC58NE/EG84 and SPC58EM80 ###################################################### PROGPPCNEXUS v5.25.00.00 16 March 2015 - Properly displays ECC errors as "XX" when using Show Module Command for non-FX interfaces - Speed up flash programming for MPC5601 and MPC5602P/B/D devices ###################################################### PROGPPCNEXUS v5.13.02.00 31 October 2014 - Adds support for USB-ML-UNIVERSAL Rev. C - Adds support for USB-ML-UNIVERSAL FX Rev. B - Adds updated OSBDM firmware - Adds support for MPC5741P, MPC5742P, MPC5743P ###################################################### PROGPPCNEXUS v5.12 18 August 2014 - Adds automatic firmware update for USB-ML-UNIVERSAL Rev. B - Adds support for MPC5748G cut 2.0 - Adds support for MPC5746C - Clarifies error message when debug shift speed is too fast PROGPPCNEXUS v3.24 28 April 2014 - Adds MPC5746R cut 2 support - Adds MPC5777C support - Adds MPC5775K cut 2 support PROGPPCNEXUS v3.10 15 November 2013 - Adds uncensor support in CPROGPPCNEXUS - Fixes user functions asking for unnecessary parameters PROGPPCNEXUS v3.7 30 August 2013 - Updated register files for MPC5775x and MPC5744P - Fixed serial file programming in PROG PROGPPCNEXUS v3.5 20 August 2013 - Fixed an issue with starter edition limitations incorrectly affecting full versions. - Added support for MPC5746R emulation devices PROGPPCNEXUS v3.4 31 July 2013 - Adds support for MPC5746R - Adds support for MPC5748G - Updates Flash programming algorithms for MPC5775x - Updates DFlash programming algorithm for MPC5744P cut 2.0 PROGPPCNEXUS v1.47 22 February 2013 1.47 adds the following: -Support for new Freescale devices: MPC5746M, MPC5744P, MPC5744K, MPC5777M, MPC5775x, SPC56xL70 -Adds uncensor support for MPC564xA, MPC5674F, MPC5645S PROGPPCNEXUS v1.41 1 February 2012 1.41 adds the following: -Adds support for Multilink Universal FX (USB-ML-UNIVERSAL-FX) development tool -Support for new Freescale devices: MPC5676R, MPC5604E, MPC5606BK PROGPPCNEXUS v1.38 21 April 2011 1.38 adds the following: -Support for new Freescale devices: MPC5645S, MPC567xK, MPC5602B/C, MPC5602P, MPC564xB -Adds OSJTAG connection option -Adds uncensor support for MPC56xx devices PROGPPCNEXUS v1.33 03 March 2010 1.33 adds the following: -Support for new Freescale devices: MPC5643L, MPC564xA, MPC5605B, MPC5606B, MPC5607B, MPC5634M -Support for revision 2.0 silicon of MPC560xB, MPC560xP, MPC560xS PROGPPCNEXUS v1.27 02 March 2009 1.27 adds the following: -Support for new Freescale devices: MPC5674F, MPC5668 -Alpha support for Revision 2.0 silicon of MPC5633M, MPC560xB, MPC560xP, and MPC560xS devices
PROG-HL-PPCZ	9.65
Release Notes: PROGPPCZ v9.65 12 December 2024 -Multilink Firmware 11.52 for improved HW licensing ################################################## PROGPPCZ v9.57 03 July 2024 -Improves Cyclone detection in cases where there are multiple active network adapters -Skip firmware update option ################################################## PROGPPCZ v9.04 23 February 2023 - Added support for Overlay Data - Fixed EN command time out - Improved Cyclone Ethernet communication - Fixed PROG Configuration window refresh ################################################## PROGPPCZ v8.98 11 Nov 2022 -Native support for USB ML Universal FX Rev D -Native support for USB ML Universal Rev E ################################################## PROGPPCZ v8.62 Sept 17 2021 - Fixes licensing issue of some multilinks #################################################### PROGPPCZ v7.95.0.1 August 5 2020 - Bug fixes to HW licensing utility - Cyclone/Cyclone FX firmware updated to 10.54 #################################################### PROGPPCZ v7.95 19 May 2020 - Support for HW licensing #################################################### PROGPPCZ v7.85 22 January 2020 - USB-ML-UNIVERSAL 10.42 - USB-ML-UNIVERSAL-FX 10.42 #################################################### PROGPPCZ 6.94.00.00 26 July 2018 - Version 9.94 firmware and 9.99 bootloader for USB-ML-Universal-FX Rev C - Version 9.99 firmware and bootloader for Cyclone Universal [FX] - Support for Intel HEX Extended Address Memory #################################################### PROGPPCZ 6.74.00.00 30 January 2018 - Driver 12.7 supports Windows 10 Secure boot - Version 9.40 bootloader and 9.74 firmware for USB-ML-Universal FX Rev B #################################################### PROGPPCZ v5.74.00.00 8 January 2016 - Support for ELF/DWARF 3 and 4, and 64-bit ELF - Includes WinDriver 12.2 to support Windows 10 #################################################### PROGPPCZ v5.21.00.00 4 February 2015 - Version 9.33 firmware and bootloader for USB-ML-Universal FX Rev B - Version 7.85 firmware for Cyclone Max - Fixed issue where some ELF data regions were skipped during programming PROGPPCZ v5.13.02.00 October 31 2014 - Adds support for USB Multilink Universal FX Rev B - Updates Cyclone Max firmware to 7.84 ############################################ PROGPPCZ v1.62.00.01 May 14 2013 1.62.00.01 adds the following: - adds Windows 8 support
PROG-HL-RS08	9.65
Release Notes: PROGRS08 v9.65 12 December 2024 -Multilink Firmware 11.52 for improved HW licensing ################################################## PROGRS08 v9.57 03 July 2024 -Improves Cyclone detection in cases where there are multiple active network adapters -Skip firmware update option ################################################## PROGRS08 v9.04 23 February 2023 - Added support for Overlay Data - Fixed EN command time out - Improved Cyclone Ethernet communication - Fixed PROG Configuration window refresh ################################################## PROGRS08 v8.98 11 Nov 2022 -Native support for USB ML Universal FX Rev D -Native support for USB ML Universal Rev E ################################################## PROGRS08 v8.62 Sept 17 2021 - Fixes licensing issue of some multilinks #################################################### PROGRS08 v7.95.0.1 August 5 2020 - Bug fixes to HW licensing utility - Cyclone/Cyclone FX firmware updated to 10.54 #################################################### PROGRS08 v7.95 19 May 2020 - Support for HW licensing #################################################### PROGRS08 v7.85 22 January 2020 - USB-ML-UNIVERSAL 10.42 - USB-ML-UNIVERSAL-FX 10.42 #################################################### PROGRS08 v6.94.00.00 25 July 2018 - Support for USB ML Universal Rev D - Support for USB ML Universal FX Rev C - Support for Intel HEX Extended Address Memory ################################################### PROGRS08 v5.74.00.00 8 January 2016 - Support for ELF/DWARF 3 and 4, and 64-bit ELF - Includes WinDriver 12.2 to support Windows 10 #################################################### PROGRS08 v5.25.00.00 26 March 2015 - v9.35 firmware for USB-ML-UNIVERSAL Rev C - v9.35 firmware USB-ML-Universal FX Rev B which fixes a power on reset dialog problem and improves connection reliability - Jungo Drivers 11.7 ##################################################### PROGRS08 v5.13.02.00 30 October 2014 - Adds support for Multilink Universal Rev C - Adds support for Multilink Universal FX Rev B - Adds updated OSBDM firmware ################################################## PROGRS08 v1.27 2 February 2012 1.27 adds the following: - Adds support for Multilink Universal FX (USB-ML-UNIVERSAL-FX) development tool - Adds support for Embedded OSBDM interface
PROG-HL-S12Z	9.65
Release Notes: PROGS12ZZ v9.65 12 December 2024 -Multilink Firmware 11.52 for improved HW licensing ################################################## PROGS12ZZ v9.57 03 July 2024 -Improves Cyclone detection in cases where there are multiple active network adapters -Skip firmware update option ####################################################### PROGS12ZZ v9.19 06 June 2023 - firmware that fixes HW licensing bug that prevents your license from "sticking" to the Multilink FX in some cases. [MULTILINK] 11.22 firmware [CYCLONE] 11.22 firmware ################################################## PROGS12ZZ v9.04 23 February 2023 - Added support for Overlay Data - Fixed EN command time out - Improved Cyclone Ethernet communication - Fixed PROG Configuration window refresh ################################################## PROGS12ZZ v8.98 11 Nov 2022 -Native support for USB ML Universal FX Rev D -Native support for USB ML Universal Rev E ################################################## PROGS12ZZ v8.62 Sept 17 2021 - Fixes licensing issue of some multilinks #################################################### PROGS12ZZ v7.95.0.1 August 5 2020 - Bug fixes to HW licensing utility - Cyclone/Cyclone FX firmware updated to 10.54 #################################################### PROGS12ZZ v7.95 19 May 2020 - Support for HW licensing #################################################### PROGS12ZZ v7.85 22 January 2020 - USB-ML-UNIVERSAL 10.42 - USB-ML-UNIVERSAL-FX 10.42 #################################################### PROGS12ZZ v6.94.00.00 25 July 2018 - Support for USB ML Universal Rev D - Support for USB ML Universal FX Rev C - Support for Intel HEX Extended Address Memory ################################################### PROGS12ZZ v5.74.00.00 8 January 2016 - Support for ELF/DWARF 3 and 4, and 64-bit ELF - Includes WinDriver 12.2 to support Windows 10 #################################################### PROGS12ZZ v5.13.02.00 30 October 2014 - Adds support for OSBDM Firmware 31.26 - Supports USB Multilink Universal Rev C ################################################# PROGS12ZZ v5.4.0.0 27 June 2014 - Supports mass erase algorithms - Supports USB Multilink Universal FX Rev B PROGS12ZZ v3.7.0.0 23 September 2013 - Added Tracelink firmware

Pricing Details

In Stock

PROG-HL-ARM

PROG for ARM® Cortex™ processors (Hardware License), PROGACMP/CPROGACMP

$199.00

Qty.	Price
1	US$199.00
2 to 4	US$199.00
5 to 9	US$169.00
10 to 24	US$139.00
25+	Contact us

Configure & buy

In Stock

PROG-HL-12Z

68HC(S)12(X) (Does not support S12Z) Flash/EEPROM Programmer (Hardware License)

$199.00

Qty.	Price
1	US$199.00
2 to 4	US$199.00
5 to 9	US$169.00
10 to 24	US$139.00
25+	Contact us

Configure & buy

In Stock

PROG-HL-16Z

68HC16 Flash/EEPROM Programmer (Hardware License)

$199.00

Qty.	Price
1	US$199.00
2 to 4	US$199.00
5 to 9	US$169.00
10 to 24	US$139.00
25+	Contact us

Configure & buy

In Stock

PROG-HL-32Z

CPU3xx Flash/EEPROM Programmer Hardware License

$199.00

Qty.	Price
1	US$199.00
2 to 4	US$199.00
5 to 9	US$169.00
10 to 24	US$139.00
25+	Contact us

Configure & buy

In Stock

PROG-HL-CFV1

ColdFire V1 Flash Programmer Hardware License

$199.00

Qty.	Price
1	US$199.00
2 to 4	US$199.00
5 to 9	US$169.00
10 to 24	US$139.00
25+	Contact us

Configure & buy

In Stock

PROG-HL-CFZ

ColdFire Flash/EEPROM Programmer Hardware License

$199.00

Qty.	Price
1	US$199.00
2 to 4	US$199.00
5 to 9	US$169.00
10 to 24	US$139.00
25+	Contact us

Configure & buy

In Stock

PROG-HL-HCS08

68HCS08 Flash/EEPROM Programmer Hardware License

$199.00

Qty.	Price
1	US$199.00
2 to 4	US$199.00
5 to 9	US$169.00
10 to 24	US$139.00
25+	Contact us

Configure & buy

In Stock

PROG-HL-PPCNEXUS

Qorivva MPC5xxx Flash Programmer Hardware License

$199.00

Qty.	Price
1	US$199.00
2 to 4	US$199.00
5 to 9	US$169.00
10 to 24	US$139.00
25+	Contact us

Configure & buy

In Stock

PROG-HL-PPCZ

Power Architecture 5xx/8xx Flash/EEPROM Programmer Hardware license

$199.00

Qty.	Price
1	US$199.00
2 to 4	US$199.00
5 to 9	US$169.00
10 to 24	US$139.00
25+	Contact us

Configure & buy

In Stock

PROG-HL-RS08

RS08 Full Featured Flash Programmer Hardware License

$199.00

Qty.	Price
1	US$199.00
2 to 4	US$199.00
5 to 9	US$169.00
10 to 24	US$139.00
25+	Contact us

Configure & buy

In Stock

PROG-HL-S12Z

S12Z (Does not support HC(S)12(X)) Flash/EEPROM Programmer Hardware license

$199.00

Qty.	Price
1	US$199.00
2 to 4	US$199.00
5 to 9	US$169.00
10 to 24	US$139.00
25+	Contact us

Configure & buy

No-Cost & Trial Software

PROGDSC

PROGDSC, PEmicro's flash programming software for NXP's DSC devices, is available free of charge; click to download PROGDSC.

PROGPPCNEXUS

A trial edition is available for PEmicro's PROGPPCNEXUS Flash programming software. Download 64K Starter Edition at no cost and request an installation code. This version has a 64KB code size limit for programming.