Product |
Version |
CYCLONE-FX-UNIV |
C (11.50.01.00) |
Release Notes:CYCLONE LC and CYCLONE FX Version 11.50.01.00
18 November 2024
-Include DLL fix for Virtual machine use of Image creation
-[PROG][DSC] Adds a minimum delay after the falling edge of reset
-[ARM] Adds support for ADIv6 and improves JTAG retries
-Bug fix for putdynamicdata with the starting address misaligned with the blocking mask
-Bug fix Start button or control port signal validation failure
-Fix dynamicReadBytes
*Device Updates*
[ARM][Infineon] Fix Memory Map feature for CYT2
*New Device Support*
[PROG][ICD][ARM] Adds S32N55 init support
[TI] Add support for the CC2340R5
[NXP][MCXL] Adds MCXL144 final support
[NXP][S32N55] Adds S32N55 support
[ST][ARM] Add STM32H7RS internal flash support
[MINDMOTION] Add support for MM32SPIN0230
[ARM][ST] Add support for the STM32WL33xx family
[Geehy][ARM] Add Geehy APM32F107 Device Support
[NXP][IMXRT7xx] Finalizes IMXRT7xx support
* Cyclone and Cyclone FX firmware 11.50
* Cyclone Image Creation Utility 9.68
* Cyclone Image Creation Utility Classic 9.68
* Cyclone Control SDK DLL 9.68
* Cyclone Control GUI 9.64
* Cyclone Control Console 9.64
* CSAP ARM 9.68
* PROG ARM 9.67
* All other CSAP 9.64
* All other PROG 9.65
########################################################
CYCLONE LC and CYCLONE FX Version 11.47.00.00
23 September 2024
Fix Image Creation Classic "Build & Deploy" area covering other settings
Removed flickering on dialog screens where the user would be setting something (like brightness or time)
Fixes the Cyclone LCD would sometimes stop updating and become unresponsive to touch.
Fix arm cortex EEPROM reading error
*Device Updates*
[ARM][PROG] Improve ARM debug entry for devices with dormant state
[NXP][S32K3xx] Improve secure debug authentication scripts
Add support for STM32U5 trustzone enabled. Add support for 0x0C00_0000 memory region
[ARM][GIGADEVICE] Fixed GD32E235F6 algorithm load bug
[ARM][GIGADEVICE] Fixed issue that prevented the GD32E23x algorithm from loading if SRAM parity check is enabled
[TI][ARM] Fix bug with MSPM0 initial and unsecure support
*New Device Support*
[ARM][NXP] Add support for iMXRT1015 Generic FlexspiA algorithm
[ARM][CVABlueWhale] Add support for CVM012x devices
[NXP][MCXA] Adds support for MCXA133/132
[NXP][S32K36x] Finalizes S32K36x support
[GIGADEVICE] Add support for GD32L235x series
[GIGADEVICE] Add support for GD32E235x series
[ST][ARM] Add Support For STM32H523/533
[ARM][ST] Add New STM32C0xx devices
[ARM][Silergy] Add support for SA32B1x
[Infineon][ARM] Add support for Infineon NGC1081
[Geehy][ARM] Add Geehy APM32F107 Device Support
[Geehy][ARM] Add APM32F411 device support
* Cyclone and Cyclone FX firmware 11.47
* Cyclone Image Creation Utility 9.64
* Cyclone Image Creation Utility Classic 9.64
* Cyclone Control SDK DLL 9.64
* Cyclone Control GUI 9.64
* Cyclone Control Console 9.64
* All CSAP 9.64
* All PROG 9.65
########################################################
CYCLONE LC and CYCLONE FX Version 11.43.01.00
02 August 2024
*Device Updates*
- [NXP][S32K36x] Finalizes S32K36x support
- [Renesas] Allow programming up to 1MB for S3Ax devices
*New Device Support*
- [GIGADEVICE] Add support for GD32E235x series
- [Infineon][ARM] Add support for Infineon NGC1081
CYCLONE LC and CYCLONE FX Version 11.43.00.00
July 03 2024
-[ARM][PROG] Adds Arm Debug Interface version 6 support (ADIv6.0)
-[ARM] Fix issue with PU programming some bytes twice
-Improves Cyclone detection in cases where there are multiple active network adapters
-Cyclone GUI skip firmware update
-[CycloneControlConsole] Added arguments to control cyclone WiFi to the control console.
-[CycloneControlSDK] Update CycloneControlSDK example projects with new WiFi calls
*Device Updates*
-Fix IndieSemi 87200 algo problems
-[NXP][RW612] Adds final run control support for RW612
-Add support for debug authentication with password for STM32H573x
-[NXP][S32K3xx] Updates S32K39x/37x support
-[NXP][S32K3xx] Updates SDAF files to version 1.2
-Improve RL78 debug mode entrance timing
*New Device Support*
-Add support for STM32H573 OBKeys
-[ST][ARM] Add STM32WBA support
-[YTMICRO] Add YTM32B1MC0 support
-[YTMICRO] Add YTM32B1HA0 support
-[ST][ARM] ST STM32U0xx Support Added
-[ZhiXin][ARM] Add Z20M1343L Support
-[NXP][MCXC] Adds run control for MCXC device family
-[AUTOCHIPS] Add AC7803x support
* Cyclone and Cyclone FX firmware 11.43
* Cyclone Image Creation Utility 9.57
* Cyclone Image Creation Utility Classic 9.57
* Cyclone Control SDK DLL 9.57
* Cyclone Control GUI 9.57
* Cyclone Control Console 9.57
* All CSAPACMP 9.57
* All PROG 9.57
########################################################
CYCLONE LC and CYCLONE FX Version 11.42.03.00
May 31 2024
*New Device Support*
- [ZhiXin][ARM] Add Z20K14xMS support
- [GIGADEVICE] Add support for GD32H757 series
- [RENESAS][ARM] Add RA0E1 support
- [Renesas][ARM] Add R7FA2A2AD Support
- MSPM0L 16KB and 8KB support
- [ARM][Geehy] Adding support for Geehy g32a1465
CYCLONE LC and CYCLONE FX Version 11.42.00.00
Apr 17 2024
- Adds WiFi support for Cyclone FX Rev. C
- Improve overlay data operations to prevent potential security breach
- Adds support for ST .OBK files
- Secure Boot Utility supports iMXRT117x. Also supports LPC55Sxx PRINCE mode
- [ST] Adds support for STM32H56x password regression (TZ disabled)
- [CVA Chip] Improves debug entry for CVM014x devices
*Device Updates*
- [ST] Adds support for programming OBKeys region of STM32H56x
- [NXP] Updates LPC55Sxx PFR algorithms to include key provisioning
- [NordicSemi] Fixed issue where watchdog was not being reset when connecting on nRF51 and nRF52 devices
- [CVA Chip] Adds support for CVM011x data flash, 0x400 region and mass erase
- [Autochips] Updates support for AC7840x 512KB variants
*New Device Support*
- [NXP] Adds support for MCXA18 devices
- [TI] Adds support for MSPM0Lx22x devices
- [Flagchip] Adds support for FC7240 devices
* Cyclone and Cyclone FX firmware 11.42
* Cyclone Image Creation Utility 9.51
* Cyclone Image Creation Utility Classic 9.51
* Cyclone Control SDK DLL 9.51
* Cyclone Control GUI 9.51
* Cyclone Control Console 9.51
* CSAPACMP 9.52, All others 9.43
* PROGACMP 9.52, All others 9.43
########################################################
CYCLONE LC and CYCLONE FX Version 11.36.00.00
Feb 20 2024
- Adds MSPM0x factory reset support as unsecure support mass erase
- [ST] Adds STM32H503 mass erase as a unsecure support type
- [ARM] Fix connection issues with certain Atmel devices (SAME70, SAMV70)
- Add unsecure support for MSPM0 devices to handle factory-reset with mass erase checkbox.
- [IMAGECREATION] Disable the deploy button after the first click
- [IMAGECREATION] Changing device resets relay and mass erase settings
- [TI] Init Support for MSPM0C
*Device Updates*
- Support specifyoverlaydata for all programming commands
- Fix Tricore Unlock Procedure
- [OMNIVISION] Update OMX14xx clock and PLL init code
- Fix for MSPM0G erase, program, and verification
- [NXP][MCXN] Updates MCXN23x to account for trustzone region
- [NXP][S32K3XX] Updates algorithms to include verify checksum and dynamic erase
- Adds STM32H5xx mass erase as a unsecure support type
- [DSC] Adds Anguilla Nano B1 support
*New Device Support*
- Add MSPM0C Support
- [ST] Adds STM32H57x devices
- [ST] Adds STM32H503 support
- [RENESAS] Add support for RA8x family
- [NXP][MCXN] Adds external spi flash algorithm to MCXN9xx and MCXN5xx
* Cyclone and Cyclone FX firmware 11.36
* Cyclone Image Creation Utility 9.43
* Cyclone Image Creation Utility Classic 9.43
* Cyclone Control SDK DLL 9.43
* Cyclone Control GUI 9.43
* Cyclone Control Console 9.43
* CSAPACMP/CSAPTRICORE 9.43, All others 9.43
* PROGACMP/PROGTRICORE 9.43. All others 9.43
########################################################
CYCLONE LC and CYCLONE FX Version 11.35.00.01
January 18 2024
- [NXP][S32K3xx] Adds Secure Debug for S32Kx8s devices
*Device Updates*
- [OMNIVISION] Update support of the OMX14xx family
- Geehy G32A1445 bug fixes
- [RENESAS] Add/Update support for RA4 (E1, T1) RA6 (T2, T3)
- [ARM][Renesas] Updating support for the RA4M1 and RA4W1
- [Traveo II] Fix Dualbank algorithms and 4M algorithms
*New Device Support*
- GigaDevice GD32A503 Support
- [RENESAS] Adds support for RA6-M4-M5-E1-E2 and RA4E2
- [Renesas][ARM] Adding support for the RA4M2 and RA4M3
- [ST] Adds BlueNRG-LPS Support
- [ARM][Microchip] Adding support for the JH00/JH01 family of devices
- [NXP][IMX] Adds octal alternate algorithm for IMXRT117x
CYCLONE LC and CYCLONE FX Version 11.35.00.00
December 8 2023
- Adds Cyclone stand-alone support for QB command
- Update Cyclone Firmware to Improve Renesas RA Debug Entry for devices with IDCODE
- Make Info button more noticeable
- Adds local job support
- Fixes Nevis3B0 stand alone support
- [ARM] Device Selection Tree can now be filtered
- Do not require peimagekey for local jobs
- Fix ignore overlap range handling
- Initialize ICU settings and load image/job restriction settings
- [PROG][ICD] Removes Anguilla Nano B0(MC56F817xx) support and only support B1
- Fix Prog Security handling for arm cortex devices
- [SAP][CreateImage] In the Create Image utility, the SU command and importing a file into CU will start at the directory of the last selected user options file.
- [PROG] Select User Options command will now start file selection from the last selected file directory
*Device Updates*
- [Renesas][ARM] Providing support for the RA4E2
- [NXP][MCXN11] Finalize support
- [INFINEON] Update of the TLE984x algorithms
- [NXP]S32M2xx] Adds final support
- [TI] Improves debug entry for MSPM0G devices
- [INFINEON] Fixes Infineon TLE98xx debug entry bug
- [NXP][KW45x][k32W1480] Reverted manual entry of core debug components' addresses
*New Device Support*
- [INFINEON] Update of TLE987x support for devices with 3KB of SRAM
- [INFINEON] Add TLE989x support
- Support for MSPM0G variant of TI MSPMOx
- [ARM][Microchip] Support for the PIC32CMxLx devices.
- [SILABS] Adds EFR32xG28 support
- [INFINEON] Add TLE986x algorithm
- [INFINEON] Add TLE985x support
- [NXP][LPC] Adds LPC864 support
- [NXP][IMX] Adds IMXRT118x B0 final support
- [NXP][ARM] Provide EAR support for MCXN11
- Adds Support for Silicon Labs EFR32xG27
- [YTMICRO] Add support for YTM32B1MD1 Series
- [NXP][Kinetis] Adds support KE17Z512 devices
- [ARM][OMNIVISION][OMX146N] Adding algorithm and
- Add support for Geehy G32A1445
- Add v2 support for RA6M1 via IAR
- Add support for CVA Bluewhale CVM014X
* Cyclone and Cyclone FX firmware 11.35
* Cyclone Image Creation Utility 9.40
* Cyclone Image Creation Utility Classic 9.40
* Cyclone Control SDK DLL 9.40
* Cyclone Control GUI 9.40
* Cyclone Control Console 9.40
* CSAPACMP/CSAPTRICORE 9.40, All others 9.40
* PROGACMP/PROGTRICORE 9.40. All others 9.40
########################################################
CYCLONE LC and CYCLONE FX Version 11.32.00.01
September 28 2023
*New Device Support*
[YT] YTM32B1MD1
CYCLONE LC and CYCLONE FX Version 11.32.00.00
Sept 26 2023
- Adds noise immunity to control port signals
- Fixes VC operation for Tricore in stand alone mode
- Improve saving image successful text message
- Improves serial communication
- Add option to erase module if fatal error occurs during programming or verification
*Device Updates*
- Updates to TI CC26x2 devices
- [Analog Devices] ADRF88xx
- [NXP] S32K388
- [NXP] KE1x
- [RASPBERRYPI] RP2040 performance improvements
- [NXP][COLDFIRE][EXTERNAL] Adds Security Region support for some devices
*New Device Support*
- [Omnivision] Adds support for OmniVision OMX146N
- [YTMICRO] Add support for YTM32B1ME0 Series
- Addition of TI CC26x2x7 devices
- [NXP] iMX11xx
- [NXP] MCXN54xx, MCXN94xx
- [NXP] MCXAx
* Cyclone and Cyclone FX firmware 11.32
* Cyclone Image Creation Utility 9.31
* Cyclone Image Creation Utility Classic 9.31
* Cyclone Control SDK DLL 9.31
* Cyclone Control GUI 9.31
* Cyclone Control Console 9.31
* CSAPACMP/CSAPTRICORE 9.31, All others 9.31
* PROGACMP/PROGTRICORE 9.30. All others 9.30
########################################################
CYCLONE LC and CYCLONE FX Version 11.29.00.00
August 16 2023
- Added CRC-32 Verify Checksum Support
- Improved Cloud Job Downloading Performance
- Added Cyclone Cloud Provisioning using a pecredentials file in Cyclone Control GUI
*Device Updates*
STM32L5 Option bytes
*New Device Support*
[FLAGCHIP] Add support for the FC7300 Series
[YTMICRO] Add support for YTM32B1LE0 Series
* Cyclone and Cyclone FX firmware 11.29
* Cyclone Image Creation Utility 9.26
* Cyclone Image Creation Utility Classic 9.26
* Cyclone Control SDK DLL 9.28
* Cyclone Control GUI 9.28
* Cyclone Control Console 9.28
* CSAPACMP/CSAPTRICORE 9.26, All others 9.19
* PROGACMP/PROGTRICORE 9.25. All others 9.19
########################################################
CYCLONE LC and CYCLONE FX Version 11.24.01.00
July 11 2023
-unitacmp.dll for Renesas RDPM support
CYCLONE LC and CYCLONE FX Version 11.24.00.00
July 03 2023
-Fixed Tricore TC2xx JTAG password unsecure
-Fixed Cyclone FX debug entry for password secured erased memory devices
*Device Updates*
Add support for iND87200 devices from IndieSemi
Adding TraveoII Cluster series support. Fixed address ranges of other TraveoII devices
Adding support for CVA Blue Whale Silicon Vendor M0+ parts
########################################################
CYCLONE and CYCLONE FX Version 11.22.00.00
June 05 2023
-Fix Barcode double Scan Issue
-[Multilink_FX][Cyclone_FX] Improve boot time for Multink_FX Rev. D and Cyclone_FX Rev. C.
-[CYCLONE][COLDFIRE] Fix MCF528x bug for setups that have external flash connected to any chip select other than CS0
-Bug fix for loading older version of unencrypted sap images
-Format SD Card Issue
-Fix importing images encrypted with public key
-Fixing error disallowing multiple CS usage
*Device Updates*
[GIGADEVICE] Update missing GD32F30x devices
[ARM][STM] An update to the STM32F4 option byte algorithms for STVP-STM32 compatibility
[ARM][GIGADEVICE] Update GD32L23x security protection user command
[NXP][ARM] Adds Erase Object File Range for KW45x/K32W1480/MCXN9xx/5xx/LPC55Sxx
[Infineon] [ARM] Adding "CA" series of CYT2B6 TraveoII devices
*New Device Support*
[YTMICRO] Adds support for the YTM32B1LD0 family
* Cyclone and Cyclone FX firmware 11.22
* Cyclone Image Creation Utility 9.19
* Cyclone Image Creation Utility Classic 9.19
* Cyclone Control SDK DLL 9.19
* Cyclone Control GUI 9.19
* Cyclone Control Console 9.19
* CSAP Versions 9.19
* PROG/CPROG Versions 9.19
########################################################
CYCLONE and CYCLONE FX Version 11.20.00.00
May 11 2023
Adds support for Cyclone Universal FX rev C
Adds job % completion on cyclone screen
Minor update to comments in CFG script in Image Creation
Fixed bug loading certain algorithms for read-only memory
*New Device Support*
SiLabs EFR32xG24
Infineon TLE987x and TLE984x
* Cyclone and Cyclone FX firmware 11.20
* Cyclone Image Creation Utility 9.17
* Cyclone Image Creation Utility Classic 9.17
* Cyclone Control SDK DLL 9.17
* Cyclone Control GUI 9.17
* Cyclone Control Console 9.17
* CSAP Versions 9.17
* PROG/CPROG Versions 9.16
########################################################
CYCLONE and CYCLONE FX Version 11.13.00.01
April 20 2023
Adds support for PEcloud, the world's first cloud-based flash programming platform
Supports Device Lifecycle Management (DLM) for Renesas RA processors
*New Device Support*
NXP S32K310/311 and S32K358/348/338/328
NordicSemi nRF9160
MindMotion MM32F0020 Family
STMicro additional STM32U5xx devices
*Device Updates*
SiLabs Allow recovery of bricked EFR32 Series 2 processors
Infineon Fixed bug in connecting to PSoC6 CY8C6xxx devices
* Cyclone and Cyclone FX firmware 11.13
* Cyclone Image Creation Utility 9.11
* Cyclone Image Creation Utility Classic 9.11
* Cyclone Control SDK DLL 9.11
* Cyclone Control GUI 9.11
* Cyclone Control Console 9.11
* CSAP Versions 9.11
* PROG/CPROG Versions 9.07
CYCLONE and CYCLONE FX Version 11.06.00.00
10 March 2023
*New Device Support*
AutoChips AC7802x
IndieSemi IND832xx
Infineon XMC7000
MindMotion MM32F0140
NXP LPC8xx
ST STM32H5
TI MSPM0x
*Device Updates*
Atmel SAMG
Autochips AC780x
Infineon TraveoII
Nuvoton Nan1x2
NXP K32Wx
NXP KWx
Silicon Labs Bluetooth
Silicon Labs Zigbee
ST ST32U5
TI CC26xx
CYCLONE and CYCLONE FX Version 11.06.00.00
23 February 2023
*New Device Support*
[Zhixin] [ARM] Added Z20K114, Z20K116, Z20K142, Z20K144, Z20K146 and Z20K148
[Renesas] [ARM] Added RA6M4 and RA6M5
[Autochips] [ARM] Added support for AC784x devices
[Geehy][ARM] Added support for APM32S1xx and APM32E1xx devices.
[Silergy] [ARM] Added support for SY7T231H, SY7T33H and SY7T309H
[Nuvoton] [ARM] Added support for Nuvoton Nano 103 and 1x2 devices
[MINDMOTION] Added support for MM32F0130 Family
[INFINEON] Added PSoC4 4100S and 4100S Plus devices
*Device Updates*
[NXP] Fixed to LPC11x66 algorithms
[Infineon] [ARM] Added dual bank support for TraveoII devices
[STM] Fixed mass erase and sector erase flaw when target Vdd is less than 2.7V
[SILABS] Fixed debug entry for EFR32BG22 and EFR32MG22 devices
- Fixed Target voltage LCD display for MON08 target
- Improved CM33 NXP Mailbox Handling
- Added support for Unsecure MSP432xx
- Added support for Control Port
- Fixed Tricore multiple CM
- Improved Ethernet connection to Cyclone
* Cyclone and Cyclone FX firmware 11.06
* Cyclone Image Creation Utility 8.96
* Cyclone Image Creation Utility Classic 8.96
* Cyclone Control SDK DLL 8.96
* Cyclone Control GUI 8.96
* Cyclone Control Console 8.96
* CSAP Versions 8.96
* PROG/CPROG Versions 9.04
#######################################################
CYCLONE and CYCLONE FX Version 10.98.3.0
06 January 2023
*New Device Support*
Geehy APM32Fxxx
Flagchip FC4150F
NXP DSC MCF56F84783
NXP Kinetis K32W1480
NXP Kinetis KW45xxx
NXP LPC55S666
Raspberry Pi RP2040 8MB/16MB
*Device Updates*
Analog Devices ADRF88xx
Infineon CY8C41xx
Infineon CY8C6xxx
NXP iMXRT1176
Renesas RA4x
Renesas RA6x
Silicon Labs EFM32PG23
Silicon Labs WGM160P Wi-Fi
ST STM32G0
ST STM32H7
TI MSP432P4
CYCLONE and CYCLONE FX Version 10.98.2.0
November 14 2022
-updated K4W1 support
*New Device Support*
Indiesemi iND83207/8
Indiesemi iND87300
Silergy SY7x21x
TI MSP432
CYCLONE and CYCLONE FX Version 10.98.1.0
October 19 2022
-Update to MSVC# example project
*New Device Support*
Analog Devices ADRF88xx
GigaDevice GD32C10x
GigaDevice GD32C11x
GigaDevice GD32E11x
GigaDevice GD32F4x0
*Device Updates*
Atmel SAML
GigaDevice GD32F4xx option byte bug fixes
Infineon TraveoII Fix verify checksum command
NXP iMX Winbond w25q128 for imxrt1171
Raspberry Pi Winbond W25Q16JV for RP2040
#######################################################
CYCLONE and CYCLONE FX Version 10.98.0.0
September 28 2022
Cyclone LC now includes Advanced Automation License
Select image by unique image id
*New Device Support*
Raspberry Pi RP2040
*Device Updates*
Add rest of Gigadevice GD32F4xx and option bytes
Gigadevice GD32W51x option bytes
IndieSemi 832xx
MindMotion MM32SPIN
NXP iMXRT117x
NXP MWCTx
NXP S32K3xx
Renesas RA2x, RA4x, RA6x
Renesas S1, S3, S5, S7
* Cyclone and Cyclone FX firmware 10.98
* Cyclone Image Creation Utility 8.96
* Cyclone Image Creation Utility Classic 8.96
* Cyclone Control SDK DLL 8.96
* Cyclone Control GUI 8.96
* Cyclone Control Console 8.96
* CSAP Versions 8.96
* PROG/CPROG Versions 8.95
#######################################################
CYCLONE and CYCLONE FX Version 10.95.0.0
August 23 2022
*New Device Support*
Geehy APM32F030xx
GigaDevice GD32E103
NXP DSC MC56F806xx and MC56F807xx devices
Nuvoton M48x
OnSemi RSL15
Renesas R7FA devices
*Device Updates*
Dialog DA1458x/DA1468x rebranded to Renesas
Indiesemi IND832xx
iMX new external flash
NordicSemi nRF52 new part numbers
Nordic nRF53 ddf fix
NXP SJA1110x external flash
S32K14x ddf changes
Added Infineon Tricore debug protection password
Improved Infineon Tricore debug entry
Disabling RESET on certain NXP PPCNEXUS devices on debug entry
* Cyclone and Cyclone FX firmware 10.95
* Cyclone Image Creation Utility 8.89
* Cyclone Image Creation Utility Classic 8.89
* Cyclone Control GUI 8.89
* Cyclone Control Console 8.89
* Cyclone Control SDK DLL 8.89
* CSAP Versions 8.89
* PROG/CPROG Versions 8.90
#######################################################
CYCLONE and CYCLONE FX Version 10.94.2.0
July 8 2022
Bug Fixes, new features, and updates:
Addition of 64-bit cycloneControlSDK.dll
Labview example updated to use 64-bit cycloneControlSDK.dll
Python example updated
Manual updates
New imxrt target support added to Secure Boot Utility
New Device Support
Dialog DA1458x/DA1468x
Indiesemi IND832xx
Nuvoton M251x/M252x/M254x/M256x/M258x
Device Updates:
Cypress CY861xx/CY862xx/CY863xx rebranded to Infineon
Infineon TraveoII
Nuvoton M031x/M032x
NXP iMX
NXP KEx
SiliconLabs Bluetooth
SiliconLabs EFM32PG22-Series-2
SiliconLabs Proprietary
SiliconLabs Zigbee
ST STM32C0
ST STM32H7
ST STM32L4
#######################################################
CYCLONE and CYCLONE FX Version 10.94.1.0
June 9 2022
**** New Device Support ****
-STM32C0xx
-STM32G050x/STM32G060x/STM32G051x/STM32G061x
-TI MSPM0x
-Zhixin Z20K14x
#######################################################
CYCLONE and CYCLONE FX Version 10.94
April 29 2022
**** New Device Support ****
-STM32U5xx
-Renesas RA4x and RA6x
-Nuvoton M031x and M032x
-GD32F40x and GD32W5xx
**** Updates ****
-(FX only) Renesas RA Device Lifecycle Management (DLM) and Trust Zone
-Mass Erase fix on STM32H7xxx
-Fixed SPC574Kx support
#######################################################
CYCLONE and CYCLONE FX Version 10.89.0.2
March 10 2022
New Device Support
Giga Device GD32F20x
Qorvo PAC52xx/PAC555xx
Device Updates
Silicon Labs Add Device Information for Bluetooth, Proprietary, Zigbee_Thread
Silicon Labs EFM32PG22-Series-2
ST Performance increase for STM32G4, STM32U5, STM32L5
#######################################################
CYCLONE and CYCLONE FX Version 10.89.0.1
March 1 2022
New Device Support or Updates:
Giga Device GD32E50x
Giga Device GD32F30x/GD32F3x0
Infineon TraveoII sFlash and workFlash support
NXP S32G3xx
ST STM32U5
NordicSemi nRF51, nRF52
Secure Boot Utility support for NXP LPC55Sxx
User Manual Updates
#######################################################
CYCLONE and CYCLONE FX Version 10.89.0.0
January 21 2022
Bug Fixes, new features, and updates:
- Improves security handling of Renesas ARM (please replace with correct device family) devices
- Simplifies CRC checksum display in the status window. Fixes keep last progress display
- Improves sap image restrictions handling
- Improves ColdFire communication frequency in Cyclone Universal FX
- Enables DHCP by default
- Adds Cyclone Control Port support
New Device Support
- Atmel SAM4L fuse bits and user page
- Autochips AC780x and AC781x
- Cypress PSoC5 EEPROM
- GigaDevice GD32F30x
- Nordic Semi nRF5340 support
- Nuvoton M453 (NuMicro)
- NXP iMX11xx
- NXP KEx
- NXP LPC
- NXP MWCTx
- NXP S32Kxxx
- NXP Sensors (PN7640)
- Renesas Dialog Semi DA14531 (SmartBond)
- Renesas RA2, RA2x, RA4x, RA6x
- Renesas S1, S3, S5, S7
- Silicon Labs Bluetooth
- Silicone Labs EFM32PG22
- Silicon Labs EFR32 Blue Gecko, Flex Gecko, Mighty Gecko
- Silicon Labs Proprietary
- Silicon Labs Wifi
- Silicon Labs Zigbee
- ST Micro STM32F7, STM32H7
- ST Micro STM32WB option bytes , STM32WL
- TI CC26xx eclipse ide fix
- ZhiXin Z20K11xM
* Cyclone and Cyclone FX application 10.89
* Cyclone Image Creation Utility 8.75
* Cyclone Image Creation Utility Classic 8.75
* Cyclone Control GUI 8.75
* Cyclone Control Console 8.75
* Cyclone Control SDK DLL 8.75
* CSAP Versions 8.75
* PROG/CPROG Versions 8.74
#######################################################
CYCLONE and CYCLONE FX Version 10.79.0.1
September 3 2021
New Device Support or Updates:
Cypress PSoC6 CY8C60xx/CY8C61xx/CY8C62xx/CY8C63xx
Giga Device GD32F105/GD32F107
Giga Device GD32F130/GD32F150/GD32F170/GD32F190
user manual updates
#######################################################
CYCLONE and CYCLONE FX Version 10.79
July 22 2021
New Device Support or Updates:
Cypress FM3 CY9Ax10A devices
Infineon TraveoII CYT2B6 and CYT2BL
Maxim MAX32620/MAX32621
ST STM32G051
ST STM32WLEx option bytes
user manual updates
PROG/CPROG hardware licensing bug fixed
* Cyclone and Cyclone FX application 10.79
* Cyclone Image Creation Utility Classic 8.60
* Cyclone Control GUI 8.58
* Cyclone Control Console 8.58
* Cyclone Control SDK DLL 8.58
* CSAP Versions 8.58
* PROG/CPROG Versions 8.59
#######################################################
CYCLONE and CYCLONE FX Version 10.78
July 02 2021
New Device Support or Updates:
GigaDevice GD32E23x
PSOC4 and TRAVEO II now listed under Infineon
Zhixin Z20K11xM
- User Guide updates
- Tricore Debug entry fix if JTAG default (DAP1)
#######################################################
CYCLONE and CYCLONE FX Version 10.75.0.2
June 16 2021
New Device Support or Updates:
Cypress -> Infineon PSoC4
MindMotion MM32SPIN
ST STM32G0
ST STM32F3
NXP 88MW3xx
NXP Kinetis KE
NXP S32G2xx
NXP SJA1110x
Renesas RA2
TI CC2642R-Q1
CYCLONE and CYCLONE FX Version 10.75.0.1
June 07 2021
New Device Support or Updates:
Autochips AC781x and AC7801x
TI MSP432
June 03 2021
New Device Support or Updates:
Cypress CY9AF1A2L
NXP MPC574xP
Renesas RA2, RA4M2
Renesas RH850
ST BlueNRG-LP
ST STM32G0B1
ST STM32G49, STM32G4A
ST STM8
TI MSP432
- User Guide updates
- OSBDM Driver Updates
#######################################################
CYCLONE and CYCLONE FX Version 10.75
May 7 2021
New Device Support or Updates:
Cypress FM3 CY9BF410/MB9BF410
Cypress FM3 CY9BF510/MB9BF510
MindMotion MM32SPIN0x
NXP S32G2xx
Renesas Synergy S7 and S5
ST STM32L1
ST STM32WL
Bug Fixes
cprogcfv1 auto-unsecure parameter now works properly
Updated various user guides
* Cyclone and Cyclone FX bootloader 10.73
* Cyclone and Cyclone FX bootstrap 10.73
* Cyclone and Cyclone FX application 10.75
* CSAP Versions 8.36 [CSAPACMPZ 8.45]
* PROG/CPROG Versions 7.95
* PROG/CPROGACMP 8.47
* PROG/CPROGCFV1 8.47
#######################################################
CYCLONE and CYCLONE FX Version 10.73
April 14 2021
New Device Support or Updates:
- NXP SJA1110
- NXP iMXRT1163/65/66
- NXP K32Wx
- NXP S32K1xx, K2xx, S32V23x, VF6xx
- NXP HC912D60C, HC912D60P
- NXP PPC external flash algorithms
- Cypress 4100S Plus Automotive
- Renesas Synergy S7 and S5
- Atmel SAM4Cx, SAM4Sx, SAMR34x
- NXP 88MW3xx
- SiLabs EFM32-Gecko, EFM32-Happy-Gecko
- SiLabs EFM32-Tiny-Gecko, EFM32-Zero-Gecko
- SiLabs EFR32-Blue-Gecko, EFR32-Mighty-Gecko
- SiLabs Wi-Fi
- NordicSemi nRF52833
- Cyclone Control python example project
- secureBootUtility
New Features
- Security features for Renesas Synergy devices
Bug Fixes
- Algorithm initialization in Silicon Labs EFM32TG devices
- Mass erase for Silicon Labs Wifi devices
* Cyclone and Cyclone FX bootloader 10.73
* Cyclone and Cyclone FX bootstrap 10.73
* Cyclone and Cyclone FX application 10.73
* CSAP Versions 8.36 [CSAPACMPZ 8.45]
* PROG/CPROG Versions 7.95 [PROG/CPROGACMP 8.44]
#######################################################
CYCLONE and CYCLONE FX Version 10.67
February 18 2021
This is a minor update of the previous 10.67 releases.
Adds CycloneControlSDK_stdcall.dll standard call DLL
New Device Support or Updates:
GigaDevice GD32F103
ON Semiconductor RSL10
#######################################################
CYCLONE and CYCLONE FX Version 10.67
February 9 2021
This is a minor update of the previous 10.67 release.
New Device Support or Updates:
Infineon TC35x
Cypress TaveoII
NXP LPC54S0xx
NXP S32K1xx
PROG/CPROGACMP 8.35
#######################################################
CYCLONE and CYCLONE FX Version 10.67
February 2 2021
New device supports
- Atmel ATSAMx devices
- Cypress PSoC5 devices
- Silicon Lab EFR32BG22x and EFR32BGM210 devices
- Silicon Labs WGM160P022KGA2 and BGM220SC22WGA2
- STMicro STM32H723/25/30 support
- NXP Kinetis 88MW32X Support
New Features
- Implements UCB Programming for TC2xx/TC3xx
- Implements dynamic overlay data programming to standalone, SDK, and CycloneControlConsole
Bug Fixes
- Fix memory read issue with TC2xx/TC3xx
- Fix boundary/blocking issue with programming TC2xx/TC3xx
- Fix Image Creation trim bug with KEx
* Cyclone and Cyclone FX bootloader 10.67
* Cyclone and Cyclone FX bootstrap 10.67
* Cyclone and Cyclone FX application 10.67
* CSAP Versions 8.36
* PROG/CPROG Versions 7.95 [PROG/CPROGACMP 8.31, PROG/CPROGDSC 8.33]
* CreateImage 8.36
* Serialize 7.30
* CycloneControlConsole 8.36
* CycloneControlGUI 8.36
* CycloneControlSDK DLL 8.36
#######################################################
CYCLONE and CYCLONE FX Version 10.64
December 4 2020
New device supports
- ATMEL SAMR30 devices
- Renesas RH850 D1x, P1L-C, F1KM
- Renesas RH850 Extended User Area
- STMicroelectronics BlueNRG-1, BlueNRG-2
- SiLabs EFR32MG12 and EFR32MG13
- Cypress 62 and 63
- STM32L5 flash support
- NXP NCJ29D5
#######################################################
CYCLONE and CYCLONE FX Version 10.63
October 16 2020
New Features or Bug Fixes
-Adds Secure Boot Utility, which helps users enable secure boot on NXP i.MXRT processors
-Adds support for secure JTAG on NXP i.MXRT processors
* Cyclone and Cyclone FX bootloader 10.63
* Cyclone and Cyclone FX bootstrap 10.63
* Cyclone and Cyclone FX application 10.63
* CSAP Versions 8.06 [CSAPACMPZ 8.23]
* PROG/CPROG Versions 7.95 [PROG/CPROGACMP 8.22]
* CreateImage 8.20
* Serialize 7.30
* CycloneControlConsole 8.20
* CycloneControlGUI 8.20
* CycloneControlSDK DLL 8.20
#######################################################
CYCLONE and CYCLONE FX Version 10.53
August 5 2020
- Support for Tricore TC1xx: TC1724, TC1791S, TC1767
- Support for Tricore TC2xx: TC21x, TC22x, TC23x, TC26x, TC27x, TC29x
- Support for Tricore TC3xx: TC35x, TC37x, TC38x
- New PROGTRICORE
- Image Creation 8.7.0
- CSAP Tricore 8.7.0
July 22 2020
New Device Support
-S32K2TV
-STM32L4P
-STM32L4Q
Device Updates
-STM32F2 flash and option byte algorithms
-STM32F4 flash and option byte algorithms
-Improves debug mode entry for NXP CortexM33
New Features or Bug Fixes
-Adds cycloneControlSDK python project
-increase cycloneControlConsole timeout to fix error while adding encryption keys
-CSAP now able to output SAP checksum to log file
* Cyclone and Cyclone FX bootloader 10.53
* Cyclone and Cyclone FX bootstrap 10.53
* Cyclone and Cyclone FX application 10.53
* CSAP Versions 8.06
* PROG/CPROG Versions 7.89 [PROG/CPROGACMP 8.05]
* CreateImage 8.06
* Serialize 7.30
* CycloneControlConsole 8.06
* CycloneControlGUI 8.06
* CycloneControlSDK DLL 8.06
#######################################################
CYCLONE and CYCLONE FX Version 10.49
May 26 2020
New Device Support
Various Cypress CYBLE devices
Various MIMXRT devices
ST STM32F7 option bytes
ST STM32H7 option bytes
Device Updates
[REDPINE] Add Erase Range Sector command to RS14100
[DSC] Add 56F817xx and 56F816xx Anguilla Nano unsecure support
New Features or Bug Fixes
Adds ability to handle more than 6 user commands
Improves BDM Sync signal detection
Adds targetobjectcrc and targetdevicecrc properties to target properties
* Cyclone and Cyclone FX bootloader 10.46
* Cyclone and Cyclone FX bootstrap 10.46
* Cyclone and Cyclone FX application 10.49
* CSAP Versions 7.98
* PROG/CPROG Versions 7.89 [PROG/CPROGWIZ 7.97]
* CreateImage 7.98
* Serialize 7.30
* CycloneControlConsole 7.98
* CycloneControlGUI 7.98
* CycloneControlSDK DLL 7.98
#######################################################
CYCLONE and CYCLONE FX Version 10.46.1.0
April 29 2020
New Device Support
Cypress CYBLE-416045-02
Cypress CYBLE-022001
Device Updates
Cypress PSoC4 CYBLE
Cypress CY8C63xx
Cypress CY8C62xx
Remove Cypress CY8C61xx folder
STM32F2 Option Bytes
Some STM32F4 Option Bytes
STM32G0 Option Bytes
STM32H7A_Bx
STM32F72x and STM32F74x Option Bytes
ST SPC572L Shadow
Silicon Labs EFR32 Blue Gecko
TI CC3220(MOD)
Duplicate STM8 algorithms removed
NXP K32Wx
NXP LPC540xx and LPC54S0xx
NXP S32K1xx
NXP Sensors
* Cyclone and Cyclone FX bootloader 10.46
* Cyclone and Cyclone FX bootstrap 10.46
* Cyclone and Cyclone FX application 10.46
* CSAP Versions 7.90
* PROG/CPROG Versions 7.89
* CreateImage 7.90
* Serialize 7.30
* CycloneControlConsole 7.90
* CycloneControlGUI 7.90
* CycloneControlSDK DLL 7.90
#######################################################
CYCLONE and CYCLONE FX Version 10.46.0.0
March 6 2020
New Device Support
- [Cypress] Traveo II
Bug Fixes
- [NXP] KE02 Program Bytes and Program Words command
- [Cypress] PSoC4 devices utilizes Erase All NVL Command
- IMXRT5xx and IMXRT6xx can now boot from external SPI
- IMXRT595S and IMXRT685S uses hard reset for vector catching
- Reset fix for K22FX512 that does not have a reset line connected
- STM8 option byte fix
- PU command no longer tries to read a block of flash while writing another block
- [Renesas] RH850
* Cyclone and Cyclone FX bootloader 10.46
* Cyclone and Cyclone FX bootstrap 10.46
* Cyclone and Cyclone FX application 10.46
* CSAP Versions 7.90
* PROG/CPROG Versions 7.89
* CreateImage 7.90
* Serialize 7.30
* CycloneControlConsole 7.90
* CycloneControlGUI 7.90
* CycloneControlSDK DLL 7.90
#######################################################
CYCLONE and CYCLONE FX Version 10.41
December 16 2019
New Features
- Cyclone Universal FX Renesas Adapter support
- [ARM] Program User Options
- Secure Key transfer for SAP encryption
New Device Support
- [STM] STML4 Option bytes
Bug Fixes
- Create Image and image encryption.
- MAC57D5xx improvements
* Cyclone and Cyclone FX bootloader 10.41
* Cyclone and Cyclone FX bootstrap 10.41
* Cyclone and Cyclone FX application 10.41
* CSAP Versions 7.79
* PROG/CPROG Versions 7.78
* CreateImage 7.80
* Serialize 7.30
* CycloneControlConsole 7.80
* CycloneControlGUI 7.80
* CycloneControlSDK DLL 7.80
#######################################################
CYCLONE and CYCLONE FX Version 10.37
November 15 2019
Features
- Cyclone Screen: Target Voltage/Current Display
- User command reset delay
- Generic Custom Trim
- [Cypress] CCG3PA support
- New commands: CHANGEV, RELAYSON, RELAYSOFF
Bug Fixes
- SD Card fixes
- DSC Fixes
* Cyclone and Cyclone FX bootloader 10.37
* Cyclone and Cyclone FX bootstrap 10.37
* Cyclone and Cyclone FX application 10.37
* CSAP Versions 7.74
* PROG/CPROG Versions 7.71
* CreateImage 7.72
* Serialize 7.30
* CycloneControlConsole 7.72
* CycloneControlGUI 7.72
* CycloneControlSDK DLL 7.72
#######################################################
CYCLONE and CYCLONE FX Version 10.27
July 23 2019
Re-release of 10.27 with updated encryption dll.
CYCLONE and CYCLONE FX Version 10.27
July 15 2019
Bug Fixes
[SiliconLabs] Improves debug entry and unsecure for EFR32, EFM32JG, and EFM32PG devices
[SiliconLabs] New algorithms with voltage scaling fix
[Cyclone Control SDK] Adds a cycloneSpecialFeaturesGetImageCRC32FromFile function to the C# header
[PROG] Adds .sx to the file filter
* Cyclone and Cyclone FX bootloader 10.27
* Cyclone and Cyclone FX bootstrap 10.27
* Cyclone and Cyclone FX application 10.27
* CSAP Versions 7.45
* PROG/CPROG Versions 7.44
* CreateImage 7.45
* Serialize 7.10
* CycloneControlConsole 7.33
* CycloneControlGUI 7.35
* CycloneControlSDK DLL 7.33
#######################################################
CYCLONE and CYCLONE FX Version 10.26
July 1 2019
Bug Fixes
- Improvements to SAP program and error limit handling.
* Cyclone and Cyclone FX bootloader 10.26
* Cyclone and Cyclone FX bootstrap 10.26
* Cyclone and Cyclone FX application 10.26
* CSAP Versions 7.33
* PROG/CPROG Versions 7.34
* CreateImage 7.33
* Serialize 7.10
* CycloneControlConsole 7.33
* CycloneControlGUI 7.35
* CycloneControlSDK DLL 7.33
#######################################################
CYCLONE and CYCLONE FX Version 10.25
June 28 2019
Bug Fixes
Fixes memory corruption issue and error $20 associated with serial files that contain constant values
[ARM] NXP LPC11xxx fixes
* Cyclone and Cyclone FX bootloader 10.25
* Cyclone and Cyclone FX bootstrap 10.25
* Cyclone and Cyclone FX application 10.25
* CSAP Versions 7.33
* PROG/CPROG Versions 7.34
* CreateImage 7.33
* Serialize 7.10
* CycloneControlConsole 7.33
* CycloneControlGUI 7.35
* CycloneControlSDK DLL 7.33
#######################################################
CYCLONE and CYCLONE FX Version 10.24
June 7 2019
New Features
Adds RSA/AES Encryption for Production Programming
[ARM] Same5x User Page support
New Device Support
[ARM] Cypress PSoc 6 devices
[ARM] TI CC3200
Bug Fixes
[ARM] Prevents device from reentering debug mode in some cases when using RE GO in your image
[ARM] LPC55xx run control fix
[ARM] Silicon Labs EFR32 run control fixes
* Cyclone and Cyclone FX bootloader 10.24
* Cyclone and Cyclone FX bootstrap 10.24
* Cyclone and Cyclone FX application 10.24
* CSAP Versions 7.33
* PROG/CPROG Versions 7.34
* CreateImage 7.33
* Serialize 7.10
* CycloneControlConsole 7.33
* CycloneControlGUI 7.35
* CycloneControlSDK DLL 7.33
#######################################################
CYCLONE and CYCLONE FX Version 10.13
January 16 2019
1. New Serialize utility and serial files V2. V2 serial numbers has multi-image support.
2. Fix Preserve Range Error
3. Fix error 8024 memory deallocation message in Cyclone Universal/ACP
4. Add hard reset after unsecure for Silicon Lab devices with no AAP window (EFR32, EFM32JG, EFM32PG)
New Device Support
1. [DSC] MC56F826xx (Cyclone Universal and Cyclone Universal FX only)
2. [ARM] Atmel SAM5x/SAMD5x
3. [ARM] STM STM32L4xxxG and STM32L4xxxI with option bytes
* Cyclone and Cyclone FX bootloader 10.13
* Cyclone and Cyclone FX bootstrap 10.13
* Cyclone and Cyclone FX application 10.13
* CSAP Versions 7.09
* PROG/CPROG Versions 7.06
* CreateImage 7.10
* Serialize 7.10
* CycloneControlConsole 7.10
* CycloneControlGUI 7.10
* CycloneControlSDK DLL 7.10
#######################################################
CYCLONE and CYCLONE FX Version 10.09
November 27, 2018
- Suspend HSM-core for NXP MPC57xx and ST SPC57xx/58xx devices
- Support for ST SPC58xHxx devices
-General bug fixes
* PROG/CPROG Versions 7.00.00
* CSAP Versions 6.99.00
* CreateImage 6.99.00.00
* Cyclone and Cyclone FX bootloader 10.09
* Cyclone and Cyclone FX bootstrap 10.09
* Cyclone and Cyclone FX application 10.09
#######################################################
CYCLONE and CYCLONE FX Version 10.04
October 8, 2018
- Updates Cyclone Control SDK with a NI LabVIEW 2018 project
- Allows debug entry on KVx device if NMI pin is low
- Fixes PSoC5 Test Mode key and address
- General bug fixes
* PROG/CPROG Versions 7.00.00
* CSAP Versions 6.99.00
* CreateImage 6.99.00.00
* Cyclone and Cyclone FX bootloader 9.99
* Cyclone and Cyclone FX bootstrap 10.04
* Cyclone and Cyclone FX application 10.04
#######################################################
CYCLONE and CYCLONE FX Version 9.99.00.02
July 18, 2018
-Adds Support for SD Card Licensing on Cyclone Universal
-Add image compiler documentation for automated image generation
-General bug fixes
-updates to Cyclone Control Suite example projects
#######################################################
CYCLONE and CYCLONE FX Version 9.90.00.00
February 20, 2018
Adds support for STMicroelectronics' STM8 devices
Fixes CycloneControlGUI hidden Connect button issue on certain OS versions
#######################################################
CYCLONE and CYCLONE FX Version 9.86.00.00
December 5, 2017
Fixes signing on executables
Corrects System Error 8 which could occur after several thousand launches of the Cyclone executables
Fixes memory access bug when using the Remote Screen on Cyclone Control GUI
Allows the Cyclone Control Console to specify image name without spaces
Adds Visual Studio and C# example projects
#######################################################
CYCLONE and CYCLONE FX Version 9.86.00.00
November 3, 2017
Adds support for ST SPC574S
Adds support for ST SPC58xNxx
Adds support for Cypress PSoC 5
Adds support for Infineon XMC1000
Fixes issue with unsecuring Silicon Labs EFM32HG devices
#######################################################
CYCLONE and CYCLONE FX Version 9.85.00.00
October 19, 2017
Cyclone Control Suite Added, including new utilities
Cyclone Control Console
Cyclone Control GUI
Cyclone Control SDK
New SDK Features
Opening Cyclones and Images by Name
Erase Individual Images
Get Extensive/Descriptive Error Messages
Added Cyclone and Image Properties with remote read/write access
Added ability to dynamically fetch a list of Properties via the Control Suite
Added new API calls while maintaining old API
Added Hardware Licensing Ability to Cyclone
SDK now only opens requested USB connected Cyclones (instead of all Cyclones)
Added Cyclone Screen remote access
Improved performance of Cyclone FX for Arm using Hardware Pipelining
Added support for many new devices and configurations
Unified installed for all CYCLONE and CYCLONE FX programmers
Makes Advanced SDK features free for all CYCLONE FX (no license needed)
Licenses for SDK now stored in Cyclone, not the PC (easier deployment)
Adds ability to prevent automatic firmware update in Cyclone Control Suite Applications
Dynamically loadable examples for the SDK added
#######################################################
Cyclone Universal FX Installation Software Version 9.80.00.03
Released March 23, 2017
- Fixed bug in Image Creation Utility passing security code information to CSAP utilities.
*Image Creation Utility v6.22.00.05
########################################################
Cyclone Universal FX Installation Software Version 9.80.00.01
Released 30 January 2017
No changes to firmware or executable versions
- Drivers 12.4 for Windows 10 secure boot support
- Adds algorithm support for partitioning for S32K144 revision 2.0 silicon
########################################################
Cyclone Universal FX Installation Software Version 9.80.00.01
Released January 09, 2017
- Fixed bug in sap_convert_console.exe utility
- Updated Manage Images utility to detect defective SAP images converted by defective sap_convert_console utility released with version 9.80.00.00
*Image converter console utility v6.22.00.02
*Image Manager Utility v6.22.00.02
########################################################
Cyclone Universal FX Installation Software Version 9.80.00.00
Released 23 December 2016
- Adds 256-bit censorship support
- Pipelined Algorithms for PPCNEXUS targets
- Reset+GO releases debug signals for PPCNEXUS
- Adds support to unsecure SiliconLabs EFR32
- SAP CRC32 removes timestamp into calculation
*Image Creation Utility v6.22.00.01
*Image Manager Utility v6.22.00.00
*IP Config Utility v6.22.00.00
*PROG versions 6.22.00.00 (PROGDSC 6.19.00.00/CPROGDSC 5.75.00.00)
########################################################
Cyclone Universal Installation Software Version 9.79.00.00
Released November 15 2016
- Improved update time with network
- Improved S12Z performance after mass erase to unsecure device.
- [ppc] Add support for S32R372 alpha support
- [ppc] Add Quasar2e and Calypso 6M cut3 support.
*Image Creation Utility 5.99.01.02
*Image Manager Utility 5.99.01.02
*IP Config Utility 5.99.01.02
*PROG versions 6.05.00.00 (PROGDSC 6.03.00.00/CPROGDSC 5.75.00.00)
########################################################
Cyclone Universal Installation Software Version 9.77.00.01
Released October 10 2016
- Added support files for Socket Programming Adapter Settings for MON08 and (R)S08 family devices.
########################################################
Cyclone Universal Installation Software Version 9.77.00.00
Released 04 October 2016
- Added Nordic Semiconductor NRF52 family devices support
- Fixed programming issues with Maxim devices when program module command is issued without erase module command
*Image Creation Utility v5.99.01.02
*Image Manager Utility v5.99.01.02
*IP Config Utility v5.99.01.02
*PROG versions v6.5.0.0
########################################################
Cyclone Universal Installation Software Version 9.76.00.00
Released 20 September 2016
- Cyclone Universal FX supports Barcode Scanning and programming
- Added Cypress chip protect/unprotect support
- Allow update of time zone by minutes
- Allow individual image deletion
- Added SPC5 drop down list selection to Create Image Utility
*Image Creation Utility v5.99.01.02
*Image Manager Utility v5.99.01.02
*IP Config Utility v5.99.01.02
*PROG versions v6.4.0.0
########################################################
Cyclone Universal Installation Software Version 9.72.00.00
Released 14 June 2016
- Adds a user programmable AUX button.
- Provides on-screen details for error codes.
- Improves debug entry for Cypress PSoC 4 processors.
- Adds Chip Protect command for Cypress PSoC4 processors.
- Fixes communications problems with the NXP LPC1769 processor.
- Improves communications for high speed BDM processors (NXP HCS08, RS08, S12, S12Z, CFV1)
- Adds support for Nordic Semiconductor nRF51 processors.
- Adds support for NXP S32R274 cut 2.0 and SPC564B64 cut 2.0
- Cyclone Universal FX adds Enhanced Security Settings
- Cyclone Universal FX can now display measured target voltage and current consumption
*Image Creation Utility v5.77.10.0
*Image Manager Utility v5.77.10.0
*IP Config Utility v5.77.4.0
########################################################
Cyclone Universal Installation Software Version 9.67.00.01
Released 18 April 2016
- The Erase Row user command in Atmel algorithms no longer overlaps with the Reset Chip command.
- Adds support for Atmel ATSAMC21Exx and ATSAMC21Gxx processors.
- Adds support for Atmel ATSAMD21E16L, ATSAMD21G15L, and ATSAMD21G16L processors.
- Adds support for Atmel ATSAME processors.
- Adds support for Atmel ATSAML22xxx processors.
- Adds support for Atmel ATSAMR processors.
- Adds support for Atmel ATSAMS processors.
- Adds support for ST STM32F030xC, STM32F031E6, STM32F038E6, STM32F05xT8, STM32F070xx, STM32F091xx, and STM32F098xx processors.
- Adds support for ST STM32F302xD, STM32F302xE, STM32F303xD, STM32F303xE, and STM32F398VE processors.
- Adds support for ST STM32F410xx, STM32F42xAG, STM32F42xAI, STM32F446xx, STM32F469xx, and STM32F479xx processors.
- Adds support for ST STM32F7 processors.
- Adds support for ST STM32L011xx, STM32L031xx, STM32L041xx, STM32L07xxx, and STM32L083xx processors.
- Adds support for ST STM32L4 processors.
- "Read/Write Unprotect" command in ST Option Bytes algorithms now program back factory default values.
- ST algorithms now support object files based at the mirrored flash locations.
- Fixes error with "Page Erase" user command in ST STM32F10xx8 and STM32F10xxB algorithms.
- Adds support for ST SPC570S50 processors.
- Adds support for ST SPC582B60 processors.
*Image Creation Utility v5.77.8.0
*Image Manager Utility v5.77.4.0
*IP Config Utility v5.77.4.0
########################################################
Cyclone Universal Installation Software Version 9.67.00.00
Released 25 March 2016
- Fixes communications failure when using MON08 high-speed algorithms
- LCD screen is more descriptive when Cyclone is running in bootloader mode
- PROGACMP updated to Version 5.84.00.00
*Image Creation Utility v5.77.8.0
*Image Manager Utility v5.77.4.0
*IP Config Utility v5.77.4.0
########################################################
Cyclone Universal Installation Software Version 9.66.00.00
Released 14 March 2016
- PROGs updated to Version 5.74.00.00
- PROGHCS08 v5.84.00.00
- PROGRS08 v5.84.00.00
Errata: Known issue with MON08 high-speed algorithms
*Image Creation Utility v5.77.4.0
*Image Manager Utility v5.77.4.0
*IP Config Utility v5.77.4.0
|
CYCLONE-FX-ARM |
A |
CYCLONE-LC-UNIV |
C (11.50.01.00) |
Release Notes:CYCLONE LC and CYCLONE FX Version 11.50.01.00
18 November 2024
-Include DLL fix for Virtual machine use of Image creation
-[PROG][DSC] Adds a minimum delay after the falling edge of reset
-[ARM] Adds support for ADIv6 and improves JTAG retries
-Bug fix for putdynamicdata with the starting address misaligned with the blocking mask
-Bug fix Start button or control port signal validation failure
-Fix dynamicReadBytes
*Device Updates*
[ARM][Infineon] Fix Memory Map feature for CYT2
*New Device Support*
[PROG][ICD][ARM] Adds S32N55 init support
[TI] Add support for the CC2340R5
[NXP][MCXL] Adds MCXL144 final support
[NXP][S32N55] Adds S32N55 support
[ST][ARM] Add STM32H7RS internal flash support
[MINDMOTION] Add support for MM32SPIN0230
[ARM][ST] Add support for the STM32WL33xx family
[Geehy][ARM] Add Geehy APM32F107 Device Support
[NXP][IMXRT7xx] Finalizes IMXRT7xx support
* Cyclone and Cyclone FX firmware 11.50
* Cyclone Image Creation Utility 9.68
* Cyclone Image Creation Utility Classic 9.68
* Cyclone Control SDK DLL 9.68
* Cyclone Control GUI 9.64
* Cyclone Control Console 9.64
* CSAP ARM 9.68
* PROG ARM 9.67
* All other CSAP 9.64
* All other PROG 9.65
########################################################
CYCLONE LC and CYCLONE FX Version 11.47.00.00
23 September 2024
Fix Image Creation Classic "Build & Deploy" area covering other settings
Removed flickering on dialog screens where the user would be setting something (like brightness or time)
Fixes the Cyclone LCD would sometimes stop updating and become unresponsive to touch.
Fix arm cortex EEPROM reading error
*Device Updates*
[ARM][PROG] Improve ARM debug entry for devices with dormant state
[NXP][S32K3xx] Improve secure debug authentication scripts
Add support for STM32U5 trustzone enabled. Add support for 0x0C00_0000 memory region
[ARM][GIGADEVICE] Fixed GD32E235F6 algorithm load bug
[ARM][GIGADEVICE] Fixed issue that prevented the GD32E23x algorithm from loading if SRAM parity check is enabled
[TI][ARM] Fix bug with MSPM0 initial and unsecure support
*New Device Support*
[ARM][NXP] Add support for iMXRT1015 Generic FlexspiA algorithm
[ARM][CVABlueWhale] Add support for CVM012x devices
[NXP][MCXA] Adds support for MCXA133/132
[NXP][S32K36x] Finalizes S32K36x support
[GIGADEVICE] Add support for GD32L235x series
[GIGADEVICE] Add support for GD32E235x series
[ST][ARM] Add Support For STM32H523/533
[ARM][ST] Add New STM32C0xx devices
[ARM][Silergy] Add support for SA32B1x
[Infineon][ARM] Add support for Infineon NGC1081
[Geehy][ARM] Add Geehy APM32F107 Device Support
[Geehy][ARM] Add APM32F411 device support
* Cyclone and Cyclone FX firmware 11.47
* Cyclone Image Creation Utility 9.64
* Cyclone Image Creation Utility Classic 9.64
* Cyclone Control SDK DLL 9.64
* Cyclone Control GUI 9.64
* Cyclone Control Console 9.64
* All CSAP 9.64
* All PROG 9.65
########################################################
CYCLONE LC and CYCLONE FX Version 11.43.01.00
02 August 2024
*Device Updates*
- [NXP][S32K36x] Finalizes S32K36x support
- [Renesas] Allow programming up to 1MB for S3Ax devices
*New Device Support*
- [GIGADEVICE] Add support for GD32E235x series
- [Infineon][ARM] Add support for Infineon NGC1081
CYCLONE LC and CYCLONE FX Version 11.43.00.00
July 03 2024
-[ARM][PROG] Adds Arm Debug Interface version 6 support (ADIv6.0)
-[ARM] Fix issue with PU programming some bytes twice
-Improves Cyclone detection in cases where there are multiple active network adapters
-Cyclone GUI skip firmware update
-[CycloneControlConsole] Added arguments to control cyclone WiFi to the control console.
-[CycloneControlSDK] Update CycloneControlSDK example projects with new WiFi calls
*Device Updates*
-Fix IndieSemi 87200 algo problems
-[NXP][RW612] Adds final run control support for RW612
-Add support for debug authentication with password for STM32H573x
-[NXP][S32K3xx] Updates S32K39x/37x support
-[NXP][S32K3xx] Updates SDAF files to version 1.2
-Improve RL78 debug mode entrance timing
*New Device Support*
-Add support for STM32H573 OBKeys
-[ST][ARM] Add STM32WBA support
-[YTMICRO] Add YTM32B1MC0 support
-[YTMICRO] Add YTM32B1HA0 support
-[ST][ARM] ST STM32U0xx Support Added
-[ZhiXin][ARM] Add Z20M1343L Support
-[NXP][MCXC] Adds run control for MCXC device family
-[AUTOCHIPS] Add AC7803x support
* Cyclone and Cyclone FX firmware 11.43
* Cyclone Image Creation Utility 9.57
* Cyclone Image Creation Utility Classic 9.57
* Cyclone Control SDK DLL 9.57
* Cyclone Control GUI 9.57
* Cyclone Control Console 9.57
* All CSAPACMP 9.57
* All PROG 9.57
########################################################
CYCLONE LC and CYCLONE FX Version 11.42.03.00
May 31 2024
*New Device Support*
- [ZhiXin][ARM] Add Z20K14xMS support
- [GIGADEVICE] Add support for GD32H757 series
- [RENESAS][ARM] Add RA0E1 support
- [Renesas][ARM] Add R7FA2A2AD Support
- MSPM0L 16KB and 8KB support
- [ARM][Geehy] Adding support for Geehy g32a1465
CYCLONE LC and CYCLONE FX Version 11.42.00.00
Apr 17 2024
- Adds WiFi support for Cyclone FX Rev. C
- Improve overlay data operations to prevent potential security breach
- Adds support for ST .OBK files
- Secure Boot Utility supports iMXRT117x. Also supports LPC55Sxx PRINCE mode
- [ST] Adds support for STM32H56x password regression (TZ disabled)
- [CVA Chip] Improves debug entry for CVM014x devices
*Device Updates*
- [ST] Adds support for programming OBKeys region of STM32H56x
- [NXP] Updates LPC55Sxx PFR algorithms to include key provisioning
- [NordicSemi] Fixed issue where watchdog was not being reset when connecting on nRF51 and nRF52 devices
- [CVA Chip] Adds support for CVM011x data flash, 0x400 region and mass erase
- [Autochips] Updates support for AC7840x 512KB variants
*New Device Support*
- [NXP] Adds support for MCXA18 devices
- [TI] Adds support for MSPM0Lx22x devices
- [Flagchip] Adds support for FC7240 devices
* Cyclone and Cyclone FX firmware 11.42
* Cyclone Image Creation Utility 9.51
* Cyclone Image Creation Utility Classic 9.51
* Cyclone Control SDK DLL 9.51
* Cyclone Control GUI 9.51
* Cyclone Control Console 9.51
* CSAPACMP 9.52, All others 9.43
* PROGACMP 9.52, All others 9.43
########################################################
CYCLONE LC and CYCLONE FX Version 11.36.00.00
Feb 20 2024
- Adds MSPM0x factory reset support as unsecure support mass erase
- [ST] Adds STM32H503 mass erase as a unsecure support type
- [ARM] Fix connection issues with certain Atmel devices (SAME70, SAMV70)
- Add unsecure support for MSPM0 devices to handle factory-reset with mass erase checkbox.
- [IMAGECREATION] Disable the deploy button after the first click
- [IMAGECREATION] Changing device resets relay and mass erase settings
- [TI] Init Support for MSPM0C
*Device Updates*
- Support specifyoverlaydata for all programming commands
- Fix Tricore Unlock Procedure
- [OMNIVISION] Update OMX14xx clock and PLL init code
- Fix for MSPM0G erase, program, and verification
- [NXP][MCXN] Updates MCXN23x to account for trustzone region
- [NXP][S32K3XX] Updates algorithms to include verify checksum and dynamic erase
- Adds STM32H5xx mass erase as a unsecure support type
- [DSC] Adds Anguilla Nano B1 support
*New Device Support*
- Add MSPM0C Support
- [ST] Adds STM32H57x devices
- [ST] Adds STM32H503 support
- [RENESAS] Add support for RA8x family
- [NXP][MCXN] Adds external spi flash algorithm to MCXN9xx and MCXN5xx
* Cyclone and Cyclone FX firmware 11.36
* Cyclone Image Creation Utility 9.43
* Cyclone Image Creation Utility Classic 9.43
* Cyclone Control SDK DLL 9.43
* Cyclone Control GUI 9.43
* Cyclone Control Console 9.43
* CSAPACMP/CSAPTRICORE 9.43, All others 9.43
* PROGACMP/PROGTRICORE 9.43. All others 9.43
########################################################
CYCLONE LC and CYCLONE FX Version 11.35.00.01
January 18 2024
- [NXP][S32K3xx] Adds Secure Debug for S32Kx8s devices
*Device Updates*
- [OMNIVISION] Update support of the OMX14xx family
- Geehy G32A1445 bug fixes
- [RENESAS] Add/Update support for RA4 (E1, T1) RA6 (T2, T3)
- [ARM][Renesas] Updating support for the RA4M1 and RA4W1
- [Traveo II] Fix Dualbank algorithms and 4M algorithms
*New Device Support*
- GigaDevice GD32A503 Support
- [RENESAS] Adds support for RA6-M4-M5-E1-E2 and RA4E2
- [Renesas][ARM] Adding support for the RA4M2 and RA4M3
- [ST] Adds BlueNRG-LPS Support
- [ARM][Microchip] Adding support for the JH00/JH01 family of devices
- [NXP][IMX] Adds octal alternate algorithm for IMXRT117x
CYCLONE LC and CYCLONE FX Version 11.35.00.00
December 8 2023
- Adds Cyclone stand-alone support for QB command
- Update Cyclone Firmware to Improve Renesas RA Debug Entry for devices with IDCODE
- Make Info button more noticeable
- Adds local job support
- Fixes Nevis3B0 stand alone support
- [ARM] Device Selection Tree can now be filtered
- Do not require peimagekey for local jobs
- Fix ignore overlap range handling
- Initialize ICU settings and load image/job restriction settings
- [PROG][ICD] Removes Anguilla Nano B0(MC56F817xx) support and only support B1
- Fix Prog Security handling for arm cortex devices
- [SAP][CreateImage] In the Create Image utility, the SU command and importing a file into CU will start at the directory of the last selected user options file.
- [PROG] Select User Options command will now start file selection from the last selected file directory
*Device Updates*
- [Renesas][ARM] Providing support for the RA4E2
- [NXP][MCXN11] Finalize support
- [INFINEON] Update of the TLE984x algorithms
- [NXP]S32M2xx] Adds final support
- [TI] Improves debug entry for MSPM0G devices
- [INFINEON] Fixes Infineon TLE98xx debug entry bug
- [NXP][KW45x][k32W1480] Reverted manual entry of core debug components' addresses
*New Device Support*
- [INFINEON] Update of TLE987x support for devices with 3KB of SRAM
- [INFINEON] Add TLE989x support
- Support for MSPM0G variant of TI MSPMOx
- [ARM][Microchip] Support for the PIC32CMxLx devices.
- [SILABS] Adds EFR32xG28 support
- [INFINEON] Add TLE986x algorithm
- [INFINEON] Add TLE985x support
- [NXP][LPC] Adds LPC864 support
- [NXP][IMX] Adds IMXRT118x B0 final support
- [NXP][ARM] Provide EAR support for MCXN11
- Adds Support for Silicon Labs EFR32xG27
- [YTMICRO] Add support for YTM32B1MD1 Series
- [NXP][Kinetis] Adds support KE17Z512 devices
- [ARM][OMNIVISION][OMX146N] Adding algorithm and
- Add support for Geehy G32A1445
- Add v2 support for RA6M1 via IAR
- Add support for CVA Bluewhale CVM014X
* Cyclone and Cyclone FX firmware 11.35
* Cyclone Image Creation Utility 9.40
* Cyclone Image Creation Utility Classic 9.40
* Cyclone Control SDK DLL 9.40
* Cyclone Control GUI 9.40
* Cyclone Control Console 9.40
* CSAPACMP/CSAPTRICORE 9.40, All others 9.40
* PROGACMP/PROGTRICORE 9.40. All others 9.40
########################################################
CYCLONE LC and CYCLONE FX Version 11.32.00.01
September 28 2023
*New Device Support*
[YT] YTM32B1MD1
CYCLONE LC and CYCLONE FX Version 11.32.00.00
Sept 26 2023
- Adds noise immunity to control port signals
- Fixes VC operation for Tricore in stand alone mode
- Improve saving image successful text message
- Improves serial communication
- Add option to erase module if fatal error occurs during programming or verification
*Device Updates*
- Updates to TI CC26x2 devices
- [Analog Devices] ADRF88xx
- [NXP] S32K388
- [NXP] KE1x
- [RASPBERRYPI] RP2040 performance improvements
- [NXP][COLDFIRE][EXTERNAL] Adds Security Region support for some devices
*New Device Support*
- [Omnivision] Adds support for OmniVision OMX146N
- [YTMICRO] Add support for YTM32B1ME0 Series
- Addition of TI CC26x2x7 devices
- [NXP] iMX11xx
- [NXP] MCXN54xx, MCXN94xx
- [NXP] MCXAx
* Cyclone and Cyclone FX firmware 11.32
* Cyclone Image Creation Utility 9.31
* Cyclone Image Creation Utility Classic 9.31
* Cyclone Control SDK DLL 9.31
* Cyclone Control GUI 9.31
* Cyclone Control Console 9.31
* CSAPACMP/CSAPTRICORE 9.31, All others 9.31
* PROGACMP/PROGTRICORE 9.30. All others 9.30
########################################################
CYCLONE LC and CYCLONE FX Version 11.29.00.00
August 16 2023
- Added CRC-32 Verify Checksum Support
- Improved Cloud Job Downloading Performance
- Added Cyclone Cloud Provisioning using a pecredentials file in Cyclone Control GUI
*Device Updates*
STM32L5 Option bytes
*New Device Support*
[FLAGCHIP] Add support for the FC7300 Series
[YTMICRO] Add support for YTM32B1LE0 Series
* Cyclone and Cyclone FX firmware 11.29
* Cyclone Image Creation Utility 9.26
* Cyclone Image Creation Utility Classic 9.26
* Cyclone Control SDK DLL 9.28
* Cyclone Control GUI 9.28
* Cyclone Control Console 9.28
* CSAPACMP/CSAPTRICORE 9.26, All others 9.19
* PROGACMP/PROGTRICORE 9.25. All others 9.19
########################################################
CYCLONE LC and CYCLONE FX Version 11.24.01.00
July 11 2023
-unitacmp.dll for Renesas RDPM support
CYCLONE LC and CYCLONE FX Version 11.24.00.00
July 03 2023
-Fixed Tricore TC2xx JTAG password unsecure
-Fixed Cyclone FX debug entry for password secured erased memory devices
*Device Updates*
Add support for iND87200 devices from IndieSemi
Adding TraveoII Cluster series support. Fixed address ranges of other TraveoII devices
Adding support for CVA Blue Whale Silicon Vendor M0+ parts
########################################################
CYCLONE and CYCLONE FX Version 11.22.00.00
June 05 2023
-Fix Barcode double Scan Issue
-[Multilink_FX][Cyclone_FX] Improve boot time for Multink_FX Rev. D and Cyclone_FX Rev. C.
-[CYCLONE][COLDFIRE] Fix MCF528x bug for setups that have external flash connected to any chip select other than CS0
-Bug fix for loading older version of unencrypted sap images
-Format SD Card Issue
-Fix importing images encrypted with public key
-Fixing error disallowing multiple CS usage
*Device Updates*
[GIGADEVICE] Update missing GD32F30x devices
[ARM][STM] An update to the STM32F4 option byte algorithms for STVP-STM32 compatibility
[ARM][GIGADEVICE] Update GD32L23x security protection user command
[NXP][ARM] Adds Erase Object File Range for KW45x/K32W1480/MCXN9xx/5xx/LPC55Sxx
[Infineon] [ARM] Adding "CA" series of CYT2B6 TraveoII devices
*New Device Support*
[YTMICRO] Adds support for the YTM32B1LD0 family
* Cyclone and Cyclone FX firmware 11.22
* Cyclone Image Creation Utility 9.19
* Cyclone Image Creation Utility Classic 9.19
* Cyclone Control SDK DLL 9.19
* Cyclone Control GUI 9.19
* Cyclone Control Console 9.19
* CSAP Versions 9.19
* PROG/CPROG Versions 9.19
########################################################
CYCLONE and CYCLONE FX Version 11.20.00.00
May 11 2023
Adds support for Cyclone Universal FX rev C
Adds job % completion on cyclone screen
Minor update to comments in CFG script in Image Creation
Fixed bug loading certain algorithms for read-only memory
*New Device Support*
SiLabs EFR32xG24
Infineon TLE987x and TLE984x
* Cyclone and Cyclone FX firmware 11.20
* Cyclone Image Creation Utility 9.17
* Cyclone Image Creation Utility Classic 9.17
* Cyclone Control SDK DLL 9.17
* Cyclone Control GUI 9.17
* Cyclone Control Console 9.17
* CSAP Versions 9.17
* PROG/CPROG Versions 9.16
########################################################
CYCLONE and CYCLONE FX Version 11.20.00.00
May 11 2023
Adds support for Cyclone Universal FX rev C
Adds job % completion on cyclone screen
Minor update to comments in CFG script in Image Creation
Fixed bug loading certain algorithms for read-only memory
*New Device Support*
SiLabs EFR32xG24
Infineon TLE987x and TLE984x
* Cyclone and Cyclone FX firmware 11.20
* Cyclone Image Creation Utility 9.17
* Cyclone Image Creation Utility Classic 9.17
* Cyclone Control SDK DLL 9.17
* Cyclone Control GUI 9.17
* Cyclone Control Console 9.17
* CSAP Versions 9.17
* PROG/CPROG Versions 9.16
########################################################
CYCLONE and CYCLONE FX Version 11.13.00.01
April 20 2023
Adds support for PEcloud, the world's first cloud-based flash programming platform
Supports Device Lifecycle Management (DLM) for Renesas RA processors
*New Device Support*
NXP S32K310/311 and S32K358/348/338/328
NordicSemi nRF9160
MindMotion MM32F0020 Family
STMicro additional STM32U5xx devices
*Device Updates*
SiLabs Allow recovery of bricked EFR32 Series 2 processors
Infineon Fixed bug in connecting to PSoC6 CY8C6xxx devices
* Cyclone and Cyclone FX firmware 11.13
* Cyclone Image Creation Utility 9.11
* Cyclone Image Creation Utility Classic 9.11
* Cyclone Control SDK DLL 9.11
* Cyclone Control GUI 9.11
* Cyclone Control Console 9.11
* CSAP Versions 9.11
* PROG/CPROG Versions 9.07
CYCLONE and CYCLONE FX Version 11.06.01
10 March 2023
*New Device Support*
AutoChips AC7802x
IndieSemi IND832xx
Infineon XMC7000
MindMotion MM32F0140
NXP LPC8xx
ST STM32H5
TI MSPM0x
*Device Updates*
Atmel SAMG
Autochips AC780x
Infineon TraveoII
Nuvoton Nan1x2
NXP K32Wx
NXP KWx
Silicon Labs Bluetooth
Silicon Labs Zigbee
ST ST32U5
TI CC26xx
CYCLONE and CYCLONE FX Version 11.06.00.00
23 February 2023
*New Device Support*
[Zhixin] [ARM] Added Z20K114, Z20K116, Z20K142, Z20K144, Z20K146 and Z20K148
[Renesas] [ARM] Added RA6M4 and RA6M5
[Autochips] [ARM] Added support for AC784x devices
[Geehy][ARM] Added support for APM32S1xx and APM32E1xx devices.
[Silergy] [ARM] Added support for SY7T231H, SY7T33H and SY7T309H
[Nuvoton] [ARM] Added support for Nuvoton Nano 103 and 1x2 devices
[MINDMOTION] Added support for MM32F0130 Family
[INFINEON] Added PSoC4 4100S and 4100S Plus devices
*Device Updates*
[NXP] Fixed to LPC11x66 algorithms
[Infineon] [ARM] Added dual bank support for TraveoII devices
[STM] Fixed mass erase and sector erase flaw when target Vdd is less than 2.7V
[SILABS] Fixed debug entry for EFR32BG22 and EFR32MG22 devices
- Fixed Target voltage LCD display for MON08 target
- Improved CM33 NXP Mailbox Handling
- Added support for Unsecure MSP432xx
- Added support for Control Port
- Fixed Tricore multiple CM
- Improved Ethernet connection to Cyclone
* Cyclone and Cyclone FX firmware 11.06
* Cyclone Image Creation Utility 8.96
* Cyclone Image Creation Utility Classic 8.96
* Cyclone Control SDK DLL 8.96
* Cyclone Control GUI 8.96
* Cyclone Control Console 8.96
* CSAP Versions 8.96
* PROG/CPROG Versions 9.04
#######################################################
CYCLONE and CYCLONE FX Version 10.98.3.0
06 January 2023
*New Device Support*
Geehy APM32Fxxx
Flagchip FC4150F
NXP DSC MCF56F84783
NXP Kinetis K32W1480
NXP Kinetis KW45xxx
NXP LPC55S666
Raspberry Pi RP2040 8MB/16MB
*Device Updates*
Analog Devices ADRF88xx
Infineon CY8C41xx
Infineon CY8C6xxx
NXP iMXRT1176
Renesas RA4x
Renesas RA6x
Silicon Labs EFM32PG23
Silicon Labs WGM160P Wi-Fi
ST STM32G0
ST STM32H7
TI MSP432P4
CYCLONE and CYCLONE FX Version 10.98.2.0
November 14 2022
-updated K4W1 support
*New Device Support*
Indiesemi iND83207/8
Indiesemi iND87300
Silergy SY7x21x
TI MSP432
Complete PSCoC4
CYCLONE and CYCLONE FX Version 10.98.1.0
October 19 2022
-Update to MSVC# example project
*New Device Support*
Analog Devices ADRF88xx
GigaDevice GD32C10x
GigaDevice GD32C11x
GigaDevice GD32E11x
GigaDevice GD32F4x0
*Device Updates*
Atmel SAML
GigaDevice GD32F4xx option byte bug fixes
Infineon TraveoII Fix verify checksum command
NXP iMX Winbond w25q128 for imxrt1171
Raspberry Pi Winbond W25Q16JV for RP2040
#######################################################
CYCLONE and CYCLONE FX Version 10.98.0.0
September 28 2022
Cyclone LC now includes Advanced Automation License
Select image by unique image id
*New Device Support*
Raspberry Pi RP2040
*Device Updates*
Add rest of Gigadevice GD32F4xx and option bytes
Gigadevice GD32W51x option bytes
IndieSemi 832xx
MindMotion MM32SPIN
NXP iMXRT117x
NXP MWCTx
NXP S32K3xx
Renesas RA2x, RA4x, RA6x
Renesas S1, S3, S5, S7
* Cyclone and Cyclone FX firmware 10.98
* Cyclone Image Creation Utility 8.96
* Cyclone Image Creation Utility Classic 8.96
* Cyclone Control SDK DLL 8.96
* Cyclone Control GUI 8.96
* Cyclone Control Console 8.96
* CSAP Versions 8.96
* PROG/CPROG Versions 8.95
#######################################################
CYCLONE and CYCLONE FX Version 10.95.0.0
August 23 2022
*New Device Support*
Geehy APM32F030xx
GigaDevice GD32E103
NXP DSC MC56F806xx and MC56F807xx devices
Nuvoton M48x
OnSemi RSL15
Renesas R7FA devices
*Device Updates*
Dialog DA1458x/DA1468x rebranded to Renesas
Indiesemi IND832xx
iMX new external flash
NordicSemi nRF52 new part numbers
Nordic nRF53 ddf fix
NXP SJA1110x external flash
S32K14x ddf changes
Added Infineon Tricore debug protection password
Improved Infineon Tricore debug entry
Disabling RESET on certain NXP PPCNEXUS devices on debug entry
* Cyclone and Cyclone FX firmware 10.95
* Cyclone Image Creation Utility 8.89
* Cyclone Image Creation Utility Classic 8.89
* Cyclone Control GUI 8.89
* Cyclone Control Console 8.89
* Cyclone Control SDK DLL 8.89
* CSAP Versions 8.89
* PROG/CPROG Versions 8.90
#######################################################
CYCLONE and CYCLONE FX Version 10.94.2.0
July 8 2022
Bug Fixes, new features, and updates:
Addition of 64-bit cycloneControlSDK.dll
Labview example updated to use 64-bit cycloneControlSDK.dll
Python example updated
Manual updates
New imxrt target support added to Secure Boot Utility
New Device Support
Dialog DA1458x/DA1468x
Indiesemi IND832xx
Nuvoton M251x/M252x/M254x/M256x/M258x
Device Updates:
Cypress CY861xx/CY862xx/CY863xx rebranded to Infineon
Infineon TraveoII
Nuvoton M031x/M032x
NXP iMX
NXP KEx
SiliconLabs Bluetooth
SiliconLabs EFM32PG22-Series-2
SiliconLabs Proprietary
SiliconLabs Zigbee
ST STM32C0
ST STM32H7
ST STM32L4
#######################################################
CYCLONE and CYCLONE FX Version 10.94.1.0
June 9 2022
**** New Device Support ****
-STM32C0xx
-STM32G050x/STM32G060x/STM32G051x/STM32G061x
-TI MSPM0x
-Zhixin Z20K14x
#######################################################
CYCLONE and CYCLONE FX Version 10.94
April 29 2022
**** New Device Support ****
-STM32U5xx
-Renesas RA4x and RA6x
-Nuvoton M031x and M032x
-GD32F40x and GD32W5xx
**** Updates ****
-(FX only) Renesas RA Device Lifecycle Management (DLM) and Trust Zone
-Mass Erase fix on STM32H7xxx
-Fixed SPC574Kx support
#######################################################
CYCLONE and CYCLONE FX Version 10.89.0.2
March 10 2022
New Device Support
GigaDevice GD32F20x
Qorvo PAC52xx/PAC555xx
Device Updates
Silicon Labs Add Device Information for Bluetooth, Proprietary, Zigbee_Thread
Silicon Labs EFM32PG22-Series-2
ST Performance increase for STM32G4, STM32U5, STM32L5
#######################################################
CYCLONE and CYCLONE FX Version 10.89.0.1
March 1 2022
New Device Support or Updates:
Giga Device GD32E50x
Giga Device GD32F30x/GD32F3x0
Infineon TraveoII sFlash and workFlash support
NXP S32G3xx
ST STM32U5
NordicSemi nRF51, nRF52
Secure Boot Utility support for NXP LPC55Sxx
User Manual Updates
#######################################################
CYCLONE and CYCLONE FX Version 10.89.0.0
January 21 2022
Bug Fixes, new features, and updates:
- Improves security handling of Renesas ARM (please replace with correct device family) devices
- Simplifies CRC checksum display in the status window. Fixes keep last progress display
- Improves sap image restrictions handling
- Improves ColdFire communication frequency in Cyclone Universal FX
- Enables DHCP by default
- Adds Cyclone Control Port support
New Device Support
- Atmel SAM4L fuse bits and user page
- Autochips AC780x and AC781x
- Cypress PSoC5 EEPROM
- GigaDevice GD32F30x
- Nordic Semi nRF5340 support
- Nuvoton M453 (NuMicro)
- NXP iMX11xx
- NXP KEx
- NXP LPC
- NXP MWCTx
- NXP S32Kxxx
- NXP Sensors (PN7640)
- Renesas Dialog Semi DA14531 (SmartBond)
- Renesas RA2, RA2x, RA4x, RA6x
- Renesas S1, S3, S5, S7
- Silicon Labs Bluetooth
- Silicone Labs EFM32PG22
- Silicon Labs EFR32 Blue Gecko, Flex Gecko, Mighty Gecko
- Silicon Labs Proprietary
- Silicon Labs Wifi
- Silicon Labs Zigbee
- ST Micro STM32F7, STM32H7
- ST Micro STM32WB option bytes , STM32WL
- TI CC26xx eclipse ide fix
- ZhiXin Z20K11xM
* Cyclone and Cyclone FX application 10.89
* Cyclone Image Creation Utility 8.75
* Cyclone Image Creation Utility Classic 8.75
* Cyclone Control GUI 8.75
* Cyclone Control Console 8.75
* Cyclone Control SDK DLL 8.75
* CSAP Versions 8.75
* PROG/CPROG Versions 8.74
#######################################################
CYCLONE and CYCLONE FX Version 10.79.0.1
September 3 2021
New Device Support or Updates:
Cypress PSoC6 CY8C60xx/CY8C61xx/CY8C62xx/CY8C63xx
Giga Device GD32F105/GD32F107
Giga Device GD32F130/GD32F150/GD32F170/GD32F190
user manual updates
#######################################################
CYCLONE and CYCLONE FX Version 10.79
July 22 2021
New Device Support or Updates:
Cypress FM3 CY9Ax10A devices
Infineon TraveoII CYT2B6 and CYT2BL
Maxim MAX32620/MAX32621
ST STM32G051
ST STM32WLEx option bytes
user manual updates
PROG/CPROG hardware licensing bug fixed
* Cyclone and Cyclone FX application 10.79
* Cyclone Image Creation Utility Classic 8.60
* Cyclone Control GUI 8.58
* Cyclone Control Console 8.58
* Cyclone Control SDK DLL 8.58
* CSAP Versions 8.58
* PROG/CPROG Versions 8.59
#######################################################
CYCLONE and CYCLONE FX Version 10.78
July 02 2021
New Device Support or Updates:
GigaDevice GD32E23x
PSOC4 and TRAVEO II now listed under Infineon
Zhixin Z20K11xM
- User Guide updates
- Tricore Debug entry fix if JTAG default (DAP1)
#######################################################
CYCLONE and CYCLONE FX Version 10.75.0.2
June 16 2021
New Device Support or Updates:
Cypress -> Infineon PSoC4
MindMotion MM32SPIN
ST STM32G0
ST STM32F3
NXP 88MW3xx
NXP Kinetis KE
NXP S32G2xx
NXP SJA1110x
Renesas RA2
TI CC2642R-Q1
CYCLONE and CYCLONE FX Version 10.75.0.1
June 07 2021
New Device Support or Updates:
Autochips AC781x and AC7801x
TI MSP432
June 03 2021
New Device Support or Updates:
Cypress CY9AF1A2L
NXP MPC574xP
Renesas RA2, RA4M2
Renesas RH850
ST BlueNRG-LP
ST STM32G0B1
ST STM32G49, STM32G4A
ST STM8
- User Guide updates
- OSBDM Driver Updates
#######################################################
CYCLONE and CYCLONE FX Version 10.75
May 7 2021
New Device Support or Updates:
Cypress FM3 CY9BF410/MB9BF410
Cypress FM3 CY9BF510/MB9BF510
MindMotion MM32SPIN0x
NXP S32G2xx
Renesas Synergy S7 and S5
ST STM32L1
ST STM32WL
Bug Fixes
cprogcfv1 auto-unsecure parameter now works properly
Updated various user guides
* Cyclone and Cyclone FX bootloader 10.73
* Cyclone and Cyclone FX bootstrap 10.73
* Cyclone and Cyclone FX application 10.75
* CSAP Versions 8.36 [CSAPACMPZ 8.45]
* PROG/CPROG Versions 7.95
* PROG/CPROGACMP 8.47
* PROG/CPROGCFV1 8.47
#######################################################
CYCLONE and CYCLONE FX Version 10.73
April 14 2021
New Device Support or Updates:
- NXP SJA1110
- NXP iMXRT1163/65/66
- NXP K32Wx
- NXP S32K1xx, K2xx, S32V23x, VF6xx
- NXP HC912D60C, HC912D60P
- NXP PPC external flash algorithms
- Cypress 4100S Plus Automotive
- Renesas Synergy S7 and S5
- Atmel SAM4Cx, SAM4Sx, SAMR34x
- NXP 88MW3xx
- SiLabs EFM32-Gecko, EFM32-Happy-Gecko
- SiLabs EFM32-Tiny-Gecko, EFM32-Zero-Gecko
- SiLabs EFR32-Blue-Gecko, EFR32-Mighty-Gecko
- SiLabs Wi-Fi
- NordicSemi nRF52833
- Cyclone Control python example project
- secureBootUtility
New Features
- Security features for Renesas Synergy devices
Bug Fixes
- Algorithm initialization in Silicon Labs EFM32TG devices
- Mass erase for Silicon Labs Wifi devices
* Cyclone and Cyclone FX bootloader 10.73
* Cyclone and Cyclone FX bootstrap 10.73
* Cyclone and Cyclone FX application 10.73
* CSAP Versions 8.36 [CSAPACMPZ 8.45]
* PROG/CPROG Versions 7.95 [PROG/CPROGACMP 8.44]
#######################################################
CYCLONE and CYCLONE FX Version 10.67
February 18 2021
This is a minor update of the previous 10.67 releases.
Adds CycloneControlSDK_stdcall.dll standard call DLL
New Device Support or Updates:
GigaDevice GD32F103
ON Semiconductor RSL10
#######################################################
CYCLONE and CYCLONE FX Version 10.67
February 9 2021
This is a minor update of the previous 10.67 release.
New Device Support or Updates:
Infineon TC35x
Cypress TaveoII
NXP LPC54S0xx
NXP S32K1xx
PROG/CPROGACMP 8.35
#######################################################
CYCLONE and CYCLONE FX Version 10.67
February 2 2021
New device supports
- Atmel ATSAMx devices
- Cypress PSoC5 devices
- Silicon Lab EFR32BG22x and EFR32BGM210 devices
- Silicon Labs WGM160P022KGA2 and BGM220SC22WGA2
- STMicro STM32H723/25/30 support
- NXP Kinetis 88MW32X Support
New Features
- Implements UCB Programming for TC2xx/TC3xx
- Implements dynamic overlay data programming to standalone, SDK, and CycloneControlConsole
Bug Fixes
- Fix memory read issue with TC2xx/TC3xx
- Fix boundary/blocking issue with programming TC2xx/TC3xx
- Fix Image Creation trim bug with KEx
* Cyclone and Cyclone FX bootloader 10.67
* Cyclone and Cyclone FX bootstrap 10.67
* Cyclone and Cyclone FX application 10.67
* CSAP Versions 8.36
* PROG/CPROG Versions 7.95 [PROG/CPROGACMP 8.31, PROG/CPROGDSC 8.33]
* CreateImage 8.36
* Serialize 7.30
* CycloneControlConsole 8.36
* CycloneControlGUI 8.36
* CycloneControlSDK DLL 8.36
#######################################################
CYCLONE and CYCLONE FX Version 10.64
December 4 2020
New device supports
- ATMEL SAMR30 devices
- Renesas RH850 D1x, P1L-C, F1KM
- Renesas RH850 Extended User Area
- STMicroelectronics BlueNRG-1, BlueNRG-2
- SiLabs EFR32MG12 and EFR32MG13
- Cypress 62 and 63
- STM32L5 flash support
- NXP NCJ29D5
#######################################################
CYCLONE and CYCLONE FX Version 10.63
October 16 2020
New Features or Bug Fixes
-Adds Secure Boot Utility, which helps users enable secure boot on NXP i.MXRT processors
-Adds support for secure JTAG on NXP i.MXRT processors
* Cyclone and Cyclone FX bootloader 10.63
* Cyclone and Cyclone FX bootstrap 10.63
* Cyclone and Cyclone FX application 10.63
* CSAP Versions 8.06 [CSAPACMPZ 8.23]
* PROG/CPROG Versions 7.95 [PROG/CPROGACMP 8.22]
* CreateImage 8.20
* Serialize 7.30
* CycloneControlConsole 8.20
* CycloneControlGUI 8.20
* CycloneControlSDK DLL 8.20
#######################################################
CYCLONE and CYCLONE FX Version 10.53
August 5 2020
- Support for Tricore TC1xx: TC1724, TC1791S, TC1767
- Support for Tricore TC2xx: TC21x, TC22x, TC23x, TC26x, TC27x, TC29x
- Support for Tricore TC3xx: TC35x, TC37x, TC38x
- New PROGTRICORE
- Image Creation 8.7.0
- CSAP Tricore 8.7.0
July 22 2020
New Device Support
-S32K2TV
-STM32L4P
-STM32L4Q
Device Updates
-STM32F2 flash and option byte algorithms
-STM32F4 flash and option byte algorithms
-Improves debug mode entry for NXP CortexM33
New Features or Bug Fixes
-Adds cycloneControlSDK python project
-increase cycloneControlConsole timeout to fix error while adding encryption keys
-CSAP now able to output SAP checksum to log file
* Cyclone and Cyclone FX bootloader 10.53
* Cyclone and Cyclone FX bootstrap 10.53
* Cyclone and Cyclone FX application 10.53
* CSAP Versions 8.06
* PROG/CPROG Versions 7.89 [PROG/CPROGACMP 8.05]
* CreateImage 8.06
* Serialize 7.30
* CycloneControlConsole 8.06
* CycloneControlGUI 8.06
* CycloneControlSDK DLL 8.06
#######################################################
CYCLONE and CYCLONE FX Version 10.49
May 26 2020
New Device Support
Various Cypress CYBLE devices
Various MIMXRT devices
ST STM32F7 option bytes
ST STM32H7 option bytes
Device Updates
[REDPINE] Add Erase Range Sector command to RS14100
[DSC] Add 56F817xx and 56F816xx Anguilla Nano unsecure support
New Features or Bug Fixes
Adds ability to handle more than 6 user commands
Improves BDM Sync signal detection
Adds targetobjectcrc and targetdevicecrc properties to target properties
* Cyclone and Cyclone FX bootloader 10.46
* Cyclone and Cyclone FX bootstrap 10.46
* Cyclone and Cyclone FX application 10.49
* CSAP Versions 7.98
* PROG/CPROG Versions 7.89 [PROG/CPROGWIZ 7.97]
* CreateImage 7.98
* Serialize 7.30
* CycloneControlConsole 7.98
* CycloneControlGUI 7.98
* CycloneControlSDK DLL 7.98
#######################################################
CYCLONE and CYCLONE FX Version 10.46.1.0
April 29 2020
New Device Support
Cypress CYBLE-416045-02
Cypress CYBLE-022001
Device Updates
Cypress PSoC4 CYBLE
Cypress CY8C63xx
Cypress CY8C62xx
Remove Cypress CY8C61xx folder
STM32F2 Option Bytes
Some STM32F4 Option Bytes
STM32G0 Option Bytes
STM32H7A_Bx
STM32F72x and STM32F74x Option Bytes
ST SPC572L Shadow
Silicon Labs EFR32 Blue Gecko
TI CC3220(MOD)
Duplicate STM8 algorithms removed
NXP K32Wx
NXP LPC540xx and LPC54S0xx
NXP S32K1xx
NXP Sensors
* Cyclone and Cyclone FX bootloader 10.46
* Cyclone and Cyclone FX bootstrap 10.46
* Cyclone and Cyclone FX application 10.46
* CSAP Versions 7.90
* PROG/CPROG Versions 7.89
* CreateImage 7.90
* Serialize 7.30
* CycloneControlConsole 7.90
* CycloneControlGUI 7.90
* CycloneControlSDK DLL 7.90
#######################################################
CYCLONE and CYCLONE FX Version 10.46
March 6 2020
New Device Support
- [Cypress] Traveo II
Bug Fixes
- [NXP] KE02 Program Bytes and Program Words command
- [Cypress] PSoC4 devices utilizes Erase All NVL Command
- IMXRT5xx and IMXRT6xx can now boot from external SPI
- IMXRT595S and IMXRT685S uses hard reset for vector catching
- Reset fix for K22FX512 that does not have a reset line connected
- STM8 option byte fix
- PU command no longer tries to read a block of flash while writing another block
- [Renesas] RH850
* Cyclone and Cyclone FX bootloader 10.46
* Cyclone and Cyclone FX bootstrap 10.46
* Cyclone and Cyclone FX application 10.46
* CSAP Versions 7.90
* PROG/CPROG Versions 7.89
* CreateImage 7.90
* Serialize 7.30
* CycloneControlConsole 7.90
* CycloneControlGUI 7.90
* CycloneControlSDK DLL 7.90
#######################################################
CYCLONE and CYCLONE FX Version 10.41
December 16 2019
New Features
- [ARM] Program User Options
- Secure Key transfer for SAP encryption
New Device Support
- [STM] STML4 Option bytes
Bug Fixes
- Create Image and image encryption.
- MAC57D5xx improvements
* Cyclone and Cyclone FX bootloader 10.41
* Cyclone and Cyclone FX bootstrap 10.41
* Cyclone and Cyclone FX application 10.41
* CSAP Versions 7.79
* PROG/CPROG Versions 7.78
* CreateImage 7.80
* Serialize 7.30
* CycloneControlConsole 7.80
* CycloneControlGUI 7.80
* CycloneControlSDK DLL 7.80
#######################################################
CYCLONE and CYCLONE FX Version 10.37
November 15 2019
Features
- Cyclone Screen: Target Voltage/Current Display
- User command reset delay
- Generic Custom Trim
- [Cypress] CCG3PA support
- New commands: CHANGEV, RELAYSON, RELAYSOFF
Bug Fixes
- SD Card fixes
- DSC Fixes
* Cyclone and Cyclone FX bootloader 10.37
* Cyclone and Cyclone FX bootstrap 10.37
* Cyclone and Cyclone FX application 10.37
* CSAP Versions 7.74
* PROG/CPROG Versions 7.71
* CreateImage 7.72
* Serialize 7.30
* CycloneControlConsole 7.72
* CycloneControlGUI 7.72
* CycloneControlSDK DLL 7.72
#######################################################
CYCLONE and CYCLONE FX Version 10.27
July 23 2019
Re-release of 10.27 with updated encryption dll.
CYCLONE and CYCLONE FX Version 10.27
July 15 2019
Bug Fixes
[SiliconLabs] Improves debug entry and unsecure for EFR32, EFM32JG, and EFM32PG devices
[SiliconLabs] New algorithms with voltage scaling fix
[Cyclone Control SDK] Adds a cycloneSpecialFeaturesGetImageCRC32FromFile function to the C# header
[PROG] Adds .sx to the file filter
* Cyclone and Cyclone FX bootloader 10.27
* Cyclone and Cyclone FX bootstrap 10.27
* Cyclone and Cyclone FX application 10.27
* CSAP Versions 7.45
* PROG/CPROG Versions 7.44
* CreateImage 7.45
* Serialize 7.10
* CycloneControlConsole 7.33
* CycloneControlGUI 7.35
* CycloneControlSDK DLL 7.33
#######################################################
CYCLONE and CYCLONE FX Version 10.26
July 1 2019
Bug Fixes
- Improvements to SAP program and error limit handling.
* Cyclone and Cyclone FX bootloader 10.26
* Cyclone and Cyclone FX bootstrap 10.26
* Cyclone and Cyclone FX application 10.26
* CSAP Versions 7.33
* PROG/CPROG Versions 7.34
* CreateImage 7.33
* Serialize 7.10
* CycloneControlConsole 7.33
* CycloneControlGUI 7.35
* CycloneControlSDK DLL 7.33
#######################################################
CYCLONE and CYCLONE FX Version 10.25
June 28 2019
Bug Fixes
Fixes memory corruption issue and error $20 associated with serial files that contain constant values
[ARM] NXP LPC11xxx fixes
* Cyclone and Cyclone FX bootloader 10.25
* Cyclone and Cyclone FX bootstrap 10.25
* Cyclone and Cyclone FX application 10.25
* CSAP Versions 7.33
* PROG/CPROG Versions 7.34
* CreateImage 7.33
* Serialize 7.10
* CycloneControlConsole 7.33
* CycloneControlGUI 7.35
* CycloneControlSDK DLL 7.33
#######################################################
CYCLONE and CYCLONE FX Version 10.24
June 7 2019
New Features
Adds RSA/AES Encryption for Production Programming
[ARM] Same5x User Page support
New Device Support
[ARM] Cypress PSoc 6 devices
[ARM] TI CC3200
Bug Fixes
[ARM] Prevents device from reentering debug mode in some cases when using RE GO in your image
[ARM] LPC55xx run control fix
[ARM] Silicon Labs EFR32 run control fixes
* Cyclone and Cyclone FX bootloader 10.24
* Cyclone and Cyclone FX bootstrap 10.24
* Cyclone and Cyclone FX application 10.24
* CSAP Versions 7.33
* PROG/CPROG Versions 7.34
* CreateImage 7.33
* Serialize 7.10
* CycloneControlConsole 7.33
* CycloneControlGUI 7.35
* CycloneControlSDK DLL 7.33
#######################################################
CYCLONE and CYCLONE FX Version 10.13
January 16 2019
1. New Serialize utility and serial files V2. V2 serial numbers has multi-image support.
2. Fix Preserve Range Error
3. Fix error 8024 memory deallocation message in Cyclone Universal/ACP
4. Add hard reset after unsecure for Silicon Lab devices with no AAP window (EFR32, EFM32JG, EFM32PG)
New Device Support
1. [DSC] MC56F826xx (Cyclone Universal and Cyclone Universal FX only)
2. [ARM] Atmel SAM5x/SAMD5x
3. [ARM] STM STM32L4xxxG and STM32L4xxxI with option bytes
* Cyclone and Cyclone FX bootloader 10.13
* Cyclone and Cyclone FX bootstrap 10.13
* Cyclone and Cyclone FX application 10.13
* CSAP Versions 7.09
* PROG/CPROG Versions 7.06
* CreateImage 7.10
* Serialize 7.10
* CycloneControlConsole 7.10
* CycloneControlGUI 7.10
* CycloneControlSDK DLL 7.10
#######################################################
CYCLONE and CYCLONE FX Version 10.09
November 27, 2018
- Suspend HSM-core for NXP MPC57xx and ST SPC57xx/58xx devices
- Support for ST SPC58xHxx devices
-General bug fixes
* PROG/CPROG Versions 7.00.00
* CSAP Versions 6.99.00
* CreateImage 6.99.00.00
* Cyclone and Cyclone FX bootloader 10.09
* Cyclone and Cyclone FX bootstrap 10.09
* Cyclone and Cyclone FX application 10.09
#######################################################
CYCLONE and CYCLONE FX Version 10.04
October 8, 2018
- Updates Cyclone Control SDK with a NI LabVIEW 2018 project
- Allows debug entry on KVx device if NMI pin is low
- Fixes PSoC5 Test Mode key and address
- General bug fixes
* PROG/CPROG Versions 7.00.00
* CSAP Versions 6.99.00
* CreateImage 6.99.00.00
* Cyclone and Cyclone FX bootloader 9.99
* Cyclone and Cyclone FX bootstrap 10.04
* Cyclone and Cyclone FX application 10.04
#######################################################
CYCLONE and CYCLONE FX Version 9.99.00.02
July 18, 2018
-Adds Support for SD Card Licensing on Cyclone Universal
-Add image compiler documentation for automated image generation
-General bug fixes
-updates to Cyclone Control Suite example projects
#######################################################
CYCLONE and CYCLONE FX Version 9.90.00.00
February 20, 2018
Adds support for STMicroelectronics' STM8 devices
Fixes CycloneControlGUI hidden Connect button issue on certain OS versions
#######################################################
CYCLONE and CYCLONE FX Version 9.86.00.00
December 5, 2017
Fixes signing on executables
Corrects System Error 8 which could occur after several thousand launches of the Cyclone executables
Fixes memory access bug when using the Remote Screen on Cyclone Control GUI
Allows the Cyclone Control Console to specify image name without spaces
Adds Visual Studio and C# example projects
#######################################################
CYCLONE and CYCLONE FX Version 9.86.00.00
November 3, 2017
Adds support for ST SPC574S
Adds support for ST SPC58xNxx
Adds support for Cypress PSoC 5
Adds support for Infineon XMC1000
Fixes issue with unsecuring Silicon Labs EFM32HG devices
#######################################################
CYCLONE and CYCLONE FX Version 9.85.00.00
October 19, 2017
Cyclone Control Suite Added, including new utilities
Cyclone Control Console
Cyclone Control GUI
Cyclone Control SDK
New SDK Features
Opening Cyclones and Images by Name
Erase Individual Images
Get Extensive/Descriptive Error Messages
Added Cyclone and Image Properties with remote read/write access
Added ability to dynamically fetch a list of Properties via the Control Suite
Added new API calls while maintaining old API
Added Hardware Licensing Ability to Cyclone
SDK now only opens requested USB connected Cyclones (instead of all Cyclones)
Added Cyclone Screen remote access
Improved performance of Cyclone FX for Arm using Hardware Pipelining
Added support for many new devices and configurations
Unified installed for all CYCLONE and CYCLONE FX programmers
Makes Advanced SDK features free for all CYCLONE FX (no license needed)
Licenses for SDK now stored in Cyclone, not the PC (easier deployment)
Adds ability to prevent automatic firmware update in Cyclone Control Suite Applications
Dynamically loadable examples for the SDK added
#######################################################
Cyclone Universal Installation Software Version 9.80.00.02
Released March 23, 2017
- Fixed bug in Image Creation Utility passing security code information to CSAP utilities.
*Image Creation Utility v6.22.00.05
#######################################################
Cyclone Universal Installation Software Version 9.80.00.02
Released February 10, 2017
- Fixed bug in sap_convert_console.exe utility converting images with more than one choose module command
- Fixed bug in sap_convert_console.exe utility converting images with little endian serial number
*Image converter console utility v6.22.00.04
*Image Manager Utility v6.22.00.04
########################################################
Cyclone Universal Installation Software Version 9.80.00.01
Released 30 January 2017
No changes to firmware or executable versions
- Drivers 12.4 for Windows 10 secure boot support
- Adds algorithm support for partitioning for S32K144 revision 2.0 silicon
########################################################
Cyclone Universal Installation Software Version 9.80.00.01
Released January 09, 2017
- Fixed bug in sap_convert_console.exe utility
- Updated Manage Images utility to detect defective SAP images converted by defective sap_convert_console utility released with version 9.80.00.00
*Image converter console utility v6.22.00.02
*Image Manager Utility v6.22.00.02
########################################################
Cyclone Universal Installation Software Version 9.80.00.00
Released 23 December 2016
- Adds 256-bit censorship support
- Pipelined Algorithms for PPCNEXUS targets
- Reset+GO releases debug signals for PPCNEXUS
- Adds support to unsecure SiliconLabs EFR32
- SAP CRC32 removes timestamp into calculation
*Image Creation Utility v6.22.00.01
*Image Manager Utility v6.22.00.00
*IP Config Utility v6.22.00.00
*PROG versions 6.22.00.00 (PROGDSC 6.19.00.00/CPROGDSC 5.75.00.00)
########################################################
Cyclone Universal Installation Software Version 9.79.00.00
Released November 15 2016
- Improved update time with network
- Improved S12Z performance after mass erase to unsecure device.
- [ppc] Add support for S32R372 alpha support
- [ppc] Add Quasar2e and Calypso 6M cut3 support.
*Image Creation Utility v5.99.01.02
*Image Manager Utility v5.99.01.02
*IP Config Utility 5.99.01.02
*PROG versions 6.05.00.00 (PROGDSC 6.03.00.00/CPROGDSC 5.75.00.00)
########################################################
Cyclone Universal Installation Software Version 9.77.00.01
Released October 10 2016
- Added support files for Socket Programming Adapter Settings for MON08 and (R)S08 family devices.
########################################################
Cyclone Universal Installation Software Version 9.77.00.00
Released October 4 2016
- Added Nordic Semiconductor NRF52 family devices support
- Fixed programming issues with Maxim devices when program module command is issued without erase module command
*Image Creation Utility v5.99.01.02
*Image Manager Utility v5.99.01.02
*IP Config Utility v5.99.01.02
*PROG versions v6.5.0.0
########################################################
Cyclone Universal Installation Software Version 9.76.00.00
Released 20 September 2016
- Added Cypress chip protect/unprotect support
- Allow update of time zone by minutes
- Allow individual image deletion
- Added SPC5 drop down list selection to Create Image Utility
*Image Creation Utility v5.99.01.02
*Image Manager Utility v5.99.01.02
*IP Config Utility v5.99.01.02
*PROG versions v6.4.0.0
########################################################
Cyclone Universal Installation Software Version 9.72.00.00
Released 14 June 2016
- Adds a user programmable AUX button.
- Provides on-screen details for error codes.
- Improves debug entry for Cypress PSoC 4 processors.
- Adds Chip Protect command for Cypress PSoC4 processors.
- Fixes communications problems with the NXP LPC1769 processor.
- Improves communications for high speed BDM processors (NXP HCS08, RS08, S12, S12Z, CFV1)
- Adds support for Nordic Semiconductor nRF51 processors.
- Adds support for NXP S32R274 cut 2.0 and SPC564B64 cut 2.0
- Cyclone Universal FX adds Enhanced Security Settings
- Cyclone Universal FX can now display measured target voltage and current consumption
*Image Creation Utility v5.77.10.0
*Image Manager Utility v5.77.10.0
*IP Config Utility v5.77.4.0
########################################################
Cyclone Universal Installation Software Version 9.67.00.01
Released 18 April 2016
- The Erase Row user command in Atmel algorithms no longer overlaps with the Reset Chip command.
- Adds support for Atmel ATSAMC21Exx and ATSAMC21Gxx processors.
- Adds support for Atmel ATSAMD21E16L, ATSAMD21G15L, and ATSAMD21G16L processors.
- Adds support for Atmel ATSAME processors.
- Adds support for Atmel ATSAML22xxx processors.
- Adds support for Atmel ATSAMR processors.
- Adds support for Atmel ATSAMS processors.
- Adds support for ST STM32F030xC, STM32F031E6, STM32F038E6, STM32F05xT8, STM32F070xx, STM32F091xx, and STM32F098xx processors.
- Adds support for ST STM32F302xD, STM32F302xE, STM32F303xD, STM32F303xE, and STM32F398VE processors.
- Adds support for ST STM32F410xx, STM32F42xAG, STM32F42xAI, STM32F446xx, STM32F469xx, and STM32F479xx processors.
- Adds support for ST STM32F7 processors.
- Adds support for ST STM32L011xx, STM32L031xx, STM32L041xx, STM32L07xxx, and STM32L083xx processors.
- Adds support for ST STM32L4 processors.
- "Read/Write Unprotect" command in ST Option Bytes algorithms now program back factory default values.
- ST algorithms now support object files based at the mirrored flash locations.
- Fixes error with "Page Erase" user command in ST STM32F10xx8 and STM32F10xxB algorithms.
- Adds support for ST SPC570S50 processors.
- Adds support for ST SPC582B60 processors.
*Image Creation Utility v5.77.8.0
*Image Manager Utility v5.77.4.0
*IP Config Utility v5.77.4.0
########################################################
Cyclone Universal Installation Software Version 9.67.00.00
Released 25 March 2016
- Fixes communications failure when using MON08 high-speed algorithms
- LCD screen is more descriptive when Cyclone is running in bootloader mode
- PROGACMP updated to Version 5.84.00.00
*Image Creation Utility v5.77.8.0
*Image Manager Utility v5.77.4.0
*IP Config Utility v5.77.4.0
########################################################
Cyclone Universal Installation Software Version 9.66.00.00
Released 14 March 2016
- PROGs updated to Version 5.74.00.00
- PROGHCS08 v5.84.00.00
- PROGRS08 v5.84.00.00
Errata: Known issue with MON08 high-speed algorithms
*Image Creation Utility v5.77.4.0
*Image Manager Utility v5.77.4.0
*IP Config Utility v5.77.4.0
|
CYCLONE-LC-ARM |
D |
|
|
|