Most of the following replacement ribbon cables, power cables, and power supply are included with your purchase of our cyclones products. These replacement parts are great to have as backup when your projects are mission critical and cannot risk having any down time. These replacement parts were designed to work perfectly with our hardware interfaces. Each ribbon cable is designed to work with specific architectures. The red line on the ribbon cable indicates pin 1.
CAB_RIBBON_06-PIN: 6-Pin (2x3), 9-Inch (22.86 cm) length, 0.1 inch (2.54mm) pitch, Female-to-Female
Designed for the following architectures:
- NXP 68HC(S)12
- NXP 68HCS08
- NXP RS08
- NXP ColdFire V1
- NXP S12Z
CAB_RIBBON_10-PIN: 10-Pin (2x5), 9-Inch (22.86 cm) length, 0.1 inch (2.54mm) pitch, Female-to-Female
Designed for the following architectures:
- NXP 68HC16
- NXP 683xx
- NXP Power Architecture MPC5xx/8xx
CAB_RIBBON_10-PIN_MINI: 10-Pin (2x5), 9-Inch (22.86 cm) length, 0.05 inch (1.27mm) pitch, Female-to-Female
Designed for the following architectures:
- ARM Cortex (JTAG/SWD)
- Infineon Tricore AUDO and AURIX (DAP-only)
CAB_RIBBON_14-PIN: 14-Pin (2x7), 9-Inch (22.86 cm) length, 0.1 inch (2.54mm) pitch, Female-to-Female
Designed for the following architectures:
- NXP MCORE
- NXP Qorivva PowerPC Nexus MPC55xx/56xx/57xx
- ST SPC5
CAB_RIBBON_16-PIN: 16-Pin (2x8), 9-Inch (22.86 cm) length, 0.1 inch (2.54mm) pitch, Female-to-Female
Designed for the following architectures:
CAB_RIBBON_20-PIN: 20-Pin (2x10), 9-Inch (22.86 cm) length, 0.1 inch (2.54mm) pitch, Female-to-Female
Designed for the following architectures:
- ARM Cortex (JTAG/SWD)
- Infineon Tricore AUDO and AURIX (DAP-only)
CAB_RIBBON_20-PIN_MINI: 20-Pin (2x10), 9-Inch (22.86 cm) length, 0.05 inch (1.27mm) pitch, Female-to-Female
Designed for the following architectures:
- ARM Cortex (JTAG/SWD)
- Infineon Tricore AUDO and AURIX (DAP-only)
CAB_RIBBON_26-PIN: 26-Pin (2x13), 9-Inch (22.86 cm) length, 0.1 inch (2.54mm) pitch, Male-to-Female
Designed for the following architectures:
CAB_RIBBON_26-PIN_FF: 26-Pin (2x13), 9-Inch (22.86 cm) length, 0.1 inch (2.54mm) pitch, Female-to-Female
Designed for the following architectures:
Please note that this ribbon cable cannot be used with devices that require a synchronous cable adapter, such as the MCF5272, MCF5206, and MCF5206E.
CAB_RIBBON_ERNI_4-PIN: 4-Pin (1x4), 8-Inch (20.32 cm) length, Male-to-Male
Designed for the following architectures:
CPRO_PWRSUPPLY: Cyclone Power Supply
- Input - 100-240V, 50-60Hz, 0.48A
- Output - 5.9V, 3.0A, 17.7W, Center positive
- 58.25 inches (148cm) cable length
- Barrel connector - 5.5mm outer diameter, 2.5mm inner diameter
- 5 interchangeable international adapters
- Type A - no holes in blades - USA, Canada, Mexico, Japan
- Type A - with holes in blades - USA, Canada, Mexico, Japan
- Type C - Europe, South America, Asia
- Type G - UK, Ireland, Malta, Malaysia, Singapore, Arabian Peninsula
- Type I - Australia, New Zealand, China, Argentina
CYCLONE_PRO_POWER_CA: 3 power cables for Cyclones
- Qty. 2 - 2.5mm x 5.5mm barrel connector to tinned lead
- Qty. 1 - 2.5mm x 5.5mm barrel connector to 2.5mm x 5.5mm barrel connector