CPROG08SZ is a command line version of the PROG08SZ software which programs EEPROM, EPROM, Flash, etc., on a 68HC08 based target. It uses script files to automate the programming process, making it ideal for production line programming.
The PROG08SZ interactive software is available on our website at no charge - please click on "FAQs, Manuals,& Downloads".
PEmicro has a resource page describing different methodologies for programming target flash in both development and production environments:
Flash Programming Resource Page
CPROG08SZ will work with the different PEmicro hardware interfaces including the Cyclone Pro, MON08 Multilink, and USB MON08 Multilink. The Cyclone Pro is recommended for both development and production, while the Multilink cables are recommended only for development.
Here are some of the commands available in the CPROG08SZ software:
BM Blank check module
BR Blank check range
EB Erase byte range
EW Erase word range
EM Erase module
PB Program bytes
PW Program words
PM Program module
CM Choose module .08P file
VM Verify module
VR Verify range
VC Verify module CRC-8
UM Upload module
UR Upload range
SS Specify S record
SM Show module
RE Reset chip
DE Delay "timeinms" milliseconds
For a more comprehensive view of the functionality of this software, view the .pdf manual for the CPROG08SZ.
CPROGMON08 - Command-line Programmer Documentation(21 KB) Document describing the command-line parameters for the command line flash programming application. Has an example of writing a programming script file and also of reading the programming result with a batch file.
CPROG08SZ - Command-line Programmer Documentation(34 KB) Document describing the command-line parameters for the command line flash programming application. Has an example of writing a programming script file and also of reading the programming result with a batch file.
PKG08SZ(20132 KB) Debugger/programmer package for all 68HC08. Includes interactive flash/eeprom programmer (PROG08SZ), debugger (ICD08SZ), and WinIDE. Works with PEmicro's popular HC08 debug interfaces. Now supports Windows XP, Vista, 7, 8, 10. 32/64 bit.
PROG08SZ Interactive Programmer(12237 KB) Programming software for all 68HC(9)08 devices from NXP. A license may be purchased to activate the CPROG08SZ commandline software. Works with PEmicro's popular HC08 debug interfaces: USB-ML-MON08 and Cyclone PRO. Now supports Windows XP, Vista, and 7 32/64 bit.