By John David A. : May 29, 2023 at 01:22 PM (13:22 hours)
Staff: Juan S. : 2 comments

We have a new board based on the LPC5506. After the micro is selected
in the connection manager, the connection manager doesn't connect and we
can't program the board. The manager indicates to check connection.

We can program the board using MCUXpresso IDE.

We are using a Multilink Universal Rev. E.

The supportFiles_ARM folder has been updated. The Multilink support is latest

Do you have a suggestion on how to resolve connection issue?

Hi John,

The LPC5506 requires a PROGACMP version of at least 7.14. Please update to PEmicro's latest PROGACMP.