mc56f84550 mcu read problem

By fatih f. : Feb 2, 2022 at 11:34 PM (23:34 hours)
Staff: Juan S. : 10 comments

Hi I want to read mc56f84550mcu with a simple and cheap solution what exactly do I need please help me

thanks

fatih f. - February 2, 2022 - 11:34 PM (23:34 hours)

Hi Fatih,

Is security on your mc56f84550mcu enabled? What exactly are you trying to read out of the mc56f84550mcu? Can you provide an address range?

Juan S. (PEmicro Staff) - February 3, 2022 - 01:01 PM (13:01 hours)

MCU security is not enabled. I want to read the flash section of the MCU codeI could not do this with the help of codewarrior. Codewarrior It gives a Programming-RAM error.That is the case.

fatih f. - February 3, 2022 - 01:11 PM (13:11 hours)

Hi Faith,

If you have a PEmicro Multilink or Cyclone, you can use our PROGDSC software to read the flash section.

You can use the link below to download PROGDSC:

https://www.pemicro.com/downloads/download_file.cfm?download_id=394

Juan S. (PEmicro Staff) - February 3, 2022 - 01:16 PM (13:16 hours)

no i just have usbdm i don't have any other programmer

fatih f. - February 3, 2022 - 01:23 PM (13:23 hours)

Hi Fatih,

I'm not familiar with usbdm.

You can purchase one of our PEmicro Multilink or Cyclone to read out the flash.

Regards,
Juan See
PEmicro

Juan S. (PEmicro Staff) - February 3, 2022 - 01:35 PM (13:35 hours)

Hi Fatih,

I'm not familiar with usbdm.

You can purchase one of our PEmicro Multilink or Cyclone to read out the flash.

Regards,
Juan See
PEmicro

Juan S. (PEmicro Staff) - February 3, 2022 - 01:36 PM (13:36 hours)

the solutions you suggested are too expensive :(

fatih f. - February 3, 2022 - 01:49 PM (13:49 hours)

Hi Faith,

Unfortunately, those are the only options we offer. Have you tried reaching out to NXP and see if they have other alternatives?

Regards,
Juan See
PEmicro

Juan S. (PEmicro Staff) - February 3, 2022 - 02:25 PM (14:25 hours)

They give very few answers to the questions in nxp. I have to solve this problem with usbdm, your devices are too expensive for me :(

fatih f. - February 3, 2022 - 02:29 PM (14:29 hours)

Want to comment? Please login or create a new PEmicro account.