Hello Everyone,
I recently bought a UNIVERSAL MULTILINK FX REV D debugger to flash NTM88 using Code Warrior IDE (V11.1). But when I try to flash something using it, it shows error as "Error during blank check" during debugger firmware Update. Though it appears in "P&E connection Assistant".
What could be the problem, I don't have any Idea. I also have same debugger "UNIVERSAL MULTILINK FX REV C" which works perfectly fine with Code Warrior.
Can you please solve this issue?
Thanks.
Gaurav D.
Greetings,
This is a common question that we have an FAQ on this. Please read about it understand that the software CWv11.1 has to be updated to work with newer hardware. This is a simple hardware vs software version incompatibility that can easily be patched up using the patches available in the FAQ:
https://www.pemicro.com/faqs/faq_view.cfm?id=211&menu_id=faqs
Takao