I have a USB-ML-UNIVERSAL. Which software package do I need to get for programming NXP MCP57XXX controllers And how do I integrate it into S32 Design Studio for Power Architecture?
Ante,
If you're using the S32 Design Studio for Power Architecture, then you don't need to purchase any other software to flash and debug the MPC57xx.
You may purchase the PROG-HL-PPCNEXUS software if you want to be able to flash outside of the S32 environment for convenience but this is not required to use the hardware.
https://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320181&productTab=5
This is assuming you have a USB-ML-UNIVERSAL Rev C or later. If you have an older Revision, then you should update it to the latest via our trade in program.
https://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320176&productTab=1
Once you are done with debugging and you are ready for production, then I hope you will consider our Cyclone LC Universal which can be used in stand alone mode on a production line.
You can create a quote by adding any items to your shopping cart and then checking out with the "Proforma" option. The system will add the approximate shipping costs. Please contact sales-info@pemicro.com if you have any questions about the quote or you want to modify it later. Check on our website for product availability.
If you are located overseas, we have a list of international distributors here:
https://www.pemicro.com/contact_us/index.cfm?showTab=9
Regards,
Johnny
PEmicro