PEmicro logo
Cart New Account Login

Logo image
HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
Require off board programmer for LPC series MCU
Yogendra P. Jul 5, 2021 at 05:45 AM (05:45 hours)
Staff: Steve M.

  • I am Looking for gang programmer for LPC series MCU for 100 pin as well as 64 pin.
    Please find the attached NXP processor details and below processor number.
    LPC55S16JBD100
    LPC55S16JBD64

    Could you pls. assist on requirement ? If you deal in same , Kindly send us the proposal.




    Comments

    • Hello,

      Our main Gang Programming solution can be explained with the attached blog post link.

      http://www.pemicro.com/blog/index.cfm?post_id=143

      This functionality utilizes multiple of our Cyclone products to be able to connect to multiple LPC MCU's.

      Another option (that is not necessarily gang programming) if you are not looking to purchase multiple hardware solutions, is JTAG daisy chaining. This protocol can be explained in the following blog post link.

      http://www.pemicro.com/blog/index.cfm?post_id=136

      With this protocol, you can only talk to one processor at a time, however, the programming process can be completed in one step. With the Gang Programming solution, multiple processors can be accessed at the same time and be done simultaneously.

      Steve

Add comment


   Want to comment? Please login or create a new PEmicro account.







© 2021 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement