Create new topic
After u-multilink-fx is connected to the computer, the light is not on. What's the reason
tonglanlanSorry about the issues you are seeing.Let's make sure you have our latest drivers installed.https://www.pemicro.com/downloads/download_file.cfm?download_id=53Then can you run the following driver test and post the results.http://www.pemicro.com/downloads/download_file.cfm?download_id=152If you have a Windows 7/8 PC, your Windows Device Manager should showJungo -> Windrvr6Jungo -> USB Multilink 2.0If you have a Windows 10 PC, your Windows Device Manager should showJungo -> pemicrowindrvrJungo -> USB Multilink 2.0Regards,JohnnyPEmicro
85/5000 I have two U-MULTILINK-FX, one with a light on, one without, all new tools. I don't know what the problem is
Are you testing both on the same PC with the same USB cable?Can you try the two on a second PC?Did you see my previous comment about Device Manager?
Two U-MULTILINK-FX, on the same PC, on the same USB cable
Do you see any differences in your Control Panel -> Device Manager - Jungo?Can you test a second PC?