PEmicro logo
Cart New Account Login

Logo image
HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
CPROGACMP : Disable "Device is secure.Erase to unsecure?" for automatic tests
Eduard S. Sep 16, 2020 at 02:53 AM (02:53 hours)
Staff: Steve M.

  • Hello!

    I've been looking through the forum and found this problem which is exactly the same as mine.

    With the difference that I have the most current version of CPROGACMP.EXE.

    I use a USB MULTILINK revision D, updated with the license today.

    The script I'm using is the following:
    :DEVICE Freescale_K2X_K22FN512M12
    CM C:\PEMicro\PROGACMP\supportFiles_ARM\NXP\K2x\freescale_k22fn512m12_1x32x128k_pflash.arp
    SS C:\PEMicro\PROGACMP\IS-ACX-KNX-1i\TestByShell_Is_Acx_Knx_1i_AllInOne_v1.0.S19

    The error you are giving me is number 34.
    However, if I enter through PROGACMP.EXE with a visual interface, it tells me if I want to put UNSECURED on the device.
    I can also reprogram from CPROGACMP.EXE without problems.

    The idea would be that CPROGACMP.EXE would automatically put the device in unsecured mode or I could put some parameter in the configuration file to make this happen voluntarily.

    Thank you very much!


  • This was resolved through a support request by adding the following line below ":DEVICE Freescale_K2x_K22FN512M12" within the cfg file...



Add comment

   Want to comment? Please login or create a new PEmicro account.

© 2021 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement