Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
Error 18 and Error 51
Antonio B. Jun 10, 2019 at 08:49 AM (08:49 hours)
Staff: Takao Y.

  • Goodmorning,

    I have a new multilink rev. D.
    When i try to load my program to HCS08 family chip, with HiWave 6.3.2, i have the error 18 and 51, each time i try to load my program.
    What kind of problem are them ?

    The program is load to our custom PCBs,and before i have a successufully loading i have the error code 18 and 51 alternately. After some fail the program was loading correctly.

    If you can help me, beacuse ever phase to program my target need more time respect in the past.

    Thanks for the help.

    Best Regards




    Comments

  • Greetings,

    First, update your Codewarrior with this FAQ:
    http://www.pemicro.com/faqs/faq_view.cfm?id=211&menu_id=faqs


    Takao Yamada

    • Thanks for the quick reply.

      Yes i have update with this patch: Patch for CFV1/S08/RS08/MON08 3rd Party Software but doesn't help.

      Same situation during the programming step. I change 3 PC and same error.

      There are other solution to try?

      Thanks

    • Thanks for the help.

      Can i ask you where i can find the old firmwares of the simulink ver.D ?
      At the moment at board of my simulink there is that: usbsufbdmens.1017

      I want to flash other firmware and see if something change.

      thanks for the help

  • Greetings,

    Could you create a brand new project within Codewarrior on a fresh silicon and without any code change start a debug session and try to program the vanilla project multiple times in a row. Does this work? This helps rule out any hardware or settings issue.

    Once you get that working, then we need to look at what might be happening in settings or in your code that may be affecting the flash programming. It could be that you modified one of the GPIO pins that are associated with BKGD or RESET pins.


    Takao Yamada

  • Thanks

    It's possible to download old version of firmware of multilink rev. D?

    thanks

  • Greetings,

    Why would you want an older firmware?


    Takao Yamada

  • To test if something change.

    I have end the ideas to resolve the problem !

    I test on a other PC with win10 and the problem seems to appear less. Software and driver are the same.

    Thanks for your help

Add comment


   Want to comment? Please login or create a new PEmicro account.







© 2019 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement