PEmicro - P&E Microcomputer Systems: Over 30 years as an Industry leader in Embedded Systems Development Tools, debug probes, and production programmers

Thursday, January 25, 2018

How to receive a flashing success message from a Cyclone
Jeff . Jan 25, 2018 at 01:31 AM (01:31 hours)
Staff: Johnny N.

2 comments

I want to know.

I'll use cyclone or cyclone-FX.

Can I get a flag messege from the PLC or something else? When the Flashing is success.

I need a signal for the next movement and, I want to make an automatic flashing device with this signal.

Is there a way to receive success messages(0,1 or other) via USB or UART or Ethernet, etc.?

let me know if you have a good idea.

Thank you very much.

Comment #1 Jeff . - January 25, 2018 - 01:31 AM (01:31 hours)

Comments

Hi Jeff,

You can get success/fail return codes by USB, Serial, or Ethernet with our Cyclone Control Suite. You just need to purchase one of our Advanced Automation Licenses and install it onto your Cyclone ACP/Universal or Cyclone ACP/Universal FX.

http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320173&productTab=1

Please note that this license does not support our last generation Cyclones (Pro, Max, Renesas, STmicro, ARM, etc).

Regards,
Johnny
PEmicro

Comment #1.1 Johnny N. (PEMicro Staff) - February 6, 2018 - 12:33 PM (12:33 hours)

Add comment

Want to comment? Please login or create a new PEMicro account.