Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service


Please accept the use of cookies on our site

At PEmicro we use web browser cookies in order to provide you with an enhanced experience and in order to be able to do things like shopping cart processing and identify you when you login to our website.

Click here to accept



search inside this forum
search inside all forums
I cannot see mu USB Cyclon Programmer on Refresh.
Joaquin D. Oct 26, 2016 at 06:58 PM (18:58 hours)
Staff: Takao Y.

  • I have an old cyclonemax programmer (Model 0805 rev A)which I cannot see once i refresh to see it.
    This programmer will not come with Display on it.I would like to get the software version to run it again.
    Could you help me on this?




    Comments

    • Thank you Takao, I Iready did as you mention and works again.Also I did erase first Windvr located at windows\system32\drivers.

  • Greetings,

    1) Which operating system are you using?

    2) When the cyclone disappears, what does the device manager look like? Does the cyclone still show up under "Jungo"?

    3) Are you using any USB hub? If so, connect directly to the computer instead.

    4) What software and its version are you using?


    Takao Yamada

  • Greetings,1)
    Which operating system are you using?2)
    R. Win XP
    When the cyclone disappears, what does the device manager look like?
    R.Yes it is.
    Does the cyclone still show up under "Jungo"?3) Are you using any USB hub?
    R.I did use both with same results
    If so, connect directly to the computer instead.4)
    What software and its version are you using?
    Cyclone max 1.61

  • Greetings,

    I want you to update your software to the latest. This will also firmware update your cyclone to the latest. Note, you will not have the ability to reverse the firmware. So if you must have the current version of software and firmware, then do not install the following:
    http://www.pemicro.com/downloads/download_file.cfm?download_id=290

    See if the new software, firmware, and new drivers resolve your issue.


    Takao Yamada

  • Greetings,

    Any update on this?


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2018 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement