Stand-Alone Flash Programming
Create new topic
I get a $001B when I try to program the target. What does this mean?
I have been trying to get past this $001B error for two days. updated the firmware and I still get itI am trying to program a MCRS08KA8CWG We have three programmers and none of them workhelp
Greetings,You should check the Cyclone Pro user manual when figuring out the error messages. The error codes can be found in the last chapter.Looks like you have a problem with SAP images that requires a higher firmware version. This means you need to update the firmware on your cyclone for you to be able to load this image. Please download our latest software for cyclone pro here:http://www.pemicro.com/downloads/download_file.cfm?download_id=291Takao Yamada
Greetings,Have you used our PROG software yet? It is found in the cyclone software package. You should use this to debug the problem you are facing. If you can get it working in PROG, then it will work in standalone. See if you can connect, load an algorithm, erase, program, then verify your device.Takao Yamada
Greetings,Is this issue resolved?Takao Yamada
Yes it is Thanks