PEmicro logo
Cart New Account Login

Logo image
HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
Programing FXTH871511DT1
Pavel K. Jun 19, 2021 at 12:44 AM (00:44 hours)
Staff: Zahar R.

  • Hi everybody!

    We try to use cyclone for programing FXTH871511DT1, this chip have two difference way for create a firmware.

    First - use a preprogrammed function, in this way for customer's program used flash area with addres 0xC000 - 0xDFFF.

    Second - using all flash memory 0xC000- 0xFFFF.

    Support file fxth870000.s8p using for first way (part of file " ADDR_RANGE=00000000/00001FFF/00/FFFFFFC0/FFFFFE00/ ; $C000-$DFFF ").

    But we have to use second way for our application.

    We try corrected file this way (ADDR_RANGE=00000000/00003FFF/00/FFFFFFC0/FFFFFE00/ ; $C000-$FFFF ) but it's didn't help.

    If we use CodeWarior and another proggramer, all worked perfect.

    What can we do for solve this problem?

    Many thanks for any help!




    Comments

  • Hi Pavel, 

    Part of the FLASH on this device is restricted from being accessed by NXP. If you are looking to make changes to these restricted FLASH ranges, you have to reach out directly to NXP applications engineer to get directions on how to do it.

    Please send me an email to zahar at pemicro dot com and I will be happy to share contact of appropriate NXP applications engineer to send this request to.

    Thank you,
    Zahar
    PEmicro.

Add comment


   Want to comment? Please login or create a new PEmicro account.







© 2021 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement