Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service
   Home P&E Customer Support FAQs - Frequently Asked Questions FAQ ID # 90
FAQ ID # 90
Your USB Multilink Universal [FX] and Cyclone [LC/FX] Universal uses PST[3:0] signals, but my ColdFire processor only has a PSTALL signal. How do I use my debugger with this configuration?
You can simply connect the PSTALL signal from your processor to each of the four PST[3], PST[2], PST[1], and PST[0] signals as defined on the NXP ColdFire BDM debug header.
Related Downloads
Architectures Categories Products
ColdFire V2/V3/V4 Interface Hardware/Cable, Debugger, Flash Programming Software, Development Kit / Package, Stand-Alone Programmer DEMO9S08JM16, XPC560SKIT176S, DC9S08QE128, GAL445B New, DC51QE128, DEMO9S08QB8, DEMOJM, XPC560PKIT100S, XPC560SADPT280S
Please rate this FAQ to help us improve our support
0 means "not helpful"
10 means "very helpful"
0 1 2 3 4 5 6 7 8 9 10

© 2021 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement