PEmicro | Experts in Embedded tools for Flash Programming and Development

Cart

New Account

Home

P&E Customer Support

FAQs - Frequently Asked Questions

FAQ ID # 224

Question

Can your programming software calculate and return a checksum?

Answer

The PEmicro PROG flash programming software includes a Verify Checksum command. It will calculate a 16 bit checksum of a block of addresses contained in the S19 file and compares it to the same block of addresses on the target device. If there is a checksum mismatch, PROG will report a verify error and display the two different results in the status window which you can log. We only have one type of checksum at this time.

If you have additional questions about the verify checksum feature, please open a ticket under Support.

Related Downloads

none

Architectures	Categories	Products
HC08, HCS08, HC(S)12(X), 68HC16, CPU3xx, ColdFire V2/V3/V4, Power MPC5xx/8xx, Qorivva MPC5xxx, RS08, ColdFire V1, Kinetis / S32, DSC, S12Z, LPC, STM32, i.MX, ARM-based	Flash Programming Software	PROGHCS08, PROG12Z, PROG16Z, PROG32Z, PROGCFZ, PROGMCZ, PROGPPCZ, PROGRS08, CYCLONE_MAX_REPLACE, UNIT12Z-LINUX-DIST, DEMO9S08QE8, XPC563MADPT144S, XPC563MADPT208S

Please rate this FAQ to help us improve our support
0 means "not helpful"
10 means "very helpful"