|
|
|
 |
Product Details
|
|
Product Comparison
|
|
Support & Downloads
|
|
Buy now
|
|
Product Details
Please note:
The USB-ML-MON08 has been discontinued. The recommended replacement part is the Cyclone Universal automated programmer and debug interface.
| System Requirements |
|
Windows 98SE/2000/XP/2003/Vista/7/8/10 with USB 2.0 software support. Requires a USB port on the PC.
|
|
|
Product Comparison
| |
 |
 |
| Product Number |
USB-ML-MON08 |
Cyclone Pro |
| Supports NXP HCS08 |
No |
Yes |
| Supports NXP HC(S)12(X) |
No |
Yes |
| Supports NXP HC08 |
Yes |
Yes |
| Supports NXP RS08 |
No |
Yes |
| Supports Trimming of target OSC |
Yes |
Yes |
| Output clock to target |
Yes |
Yes |
| Programming Software Included |
No |
Yes |
| Automated Control Software |
No |
Yes |
| MCU voltage range |
2v, 3v, 5v |
2v, 3v, 5v |
| MCU bus frequency range |
1Mhz - 8 Mhz |
1Mhz - 8 Mhz |
| USB interface |
Yes |
Yes |
| Serial Interface |
No |
Yes |
| Ethernet Interface |
No |
Yes |
| Auto-detects target frequency |
Yes |
Yes |
| Generates HC08 monitor mode voltage |
Yes |
Yes |
| LCD display |
No |
Yes |
| Transient supression |
Yes |
Yes |
| I/O lines clamping protection |
No |
Yes |
| Power rail clamping protection |
No |
Yes |
| Can provide power to target |
Yes, 125mA |
Yes, 500mA |
| Can switch target power (via relays) |
No |
Yes |
| High-speed communications |
Yes |
Yes |
| Stand-alone programming (PC/No PC) |
No |
Yes |
| Stores multiple programming images |
No |
Yes |
| Designed for parallel operation (GANG) |
No |
Yes |
| Expansion Port |
No |
Yes |
| Serial/UDP protocol available |
No |
Yes |
| RoHS compliant |
Yes |
Yes |
|
|
Jump to: Documentation / Manuals Downloads FAQs Version info & Release Notes
|
|
|
|
|
|
| Downloads |
 |
P&E Hardware Interface Drivers, Version 12 (Win XP/Vista/7/8/10)
(9828 KB)
Version 12.4 Adds support for Windows 10 and Windows 10 1607. Installs PEmicro drivers to allow applications to communicate with PEmicro hardware. Please note that not all hardware may be supported for your OS. This does not include the application level support which comes with the different products. Administrator privilege is now required. Released 01/12/2017. |
|
Driver Test
(208 KB)
This file tests the PEmicro Version 12 and OSBDM Driver file structure to make sure all drivers are in the correct place. This utility does not perform any functional tests. Version numbers/dates are also noted. Windows XP, Windows 7, Windows 8, Windows 10 compatible |
|
PROG08SZ Interactive Programmer
(12237 KB)
Programming software for all 68HC(9)08 devices from NXP. A license may be purchased to activate the CPROG08SZ commandline software. Works with PEmicro's popular HC08 debug interfaces: USB-ML-MON08 and Cyclone PRO. Now supports Windows XP, Vista, and 7 32/64 bit. |
|
P&E Hardware Interface Drivers Version 9 (Windows 98/ME)
(26927 KB)
NOTE: THIS IS A LEGACY DRIVER. Installs PEmicro drivers to allow PEmicro applications to communicate with PEmicro hardware via the parallel port, PCI bus, Ethernet, Serial, and USB. Please note that not all hardware maybe
supported for your OS. This does not include the application level support which comes with the different products. This install will also work for Windows 2000/XP, but for these operating systems you should download the latest version instead. |
|
PKG08SZ
(31427 KB)
Debugger/programmer package for all 68HC08. Includes interactive flash/eeprom programmer (PROG08SZ), debugger (ICD08SZ), and WinIDE. Works with PEmicro's popular HC08 debug interfaces: MON08 Multilink, USB-ML-MON08, MON08 Cyclone, Cyclone PRO. Now supports Windows XP, Vista, and 7 32/64 bit. |
|
|
|
|
| FAQs |
|
I am using the PROG08SZ flash programmer, Mon08 Cyclone, or Cyclone Pro to program 68HC908QY, 68HC908QT, 68HC908LB, or 68HC908QL devices and sometimes the devices do not verify. What is the problem? |
|
I get a Blue Screen crash when Windows attempts to install the drivers for my USB Hardware Interface when I plug it in. What can I do? |
|
I am getting an EPrivilege Exception when running PEmicro software. What is the problem? |
|
My USB Multilink is not detected by NXP Codewarrior. What should I do? |
|
I am attempting to program external flash connected to my embedded processor. Either the erase, program, or show module does not work. What is the most likely sources of problems? |
|
When I run the command-line programmer which its path has a space in it, or run the programmer with a configuration file whose file name has a space in it, I get an error:
Error - Invalid command line parameter. ERROR 43 during script!
How do I fix this problem? |
|
My USB Multilink stopped working. It was working just fine last time I used it, however now the software says the port is "undetected"! The Blue and orange LED are on... help! |
|
I try to install your software, but installation fails with this message:
There are currently 2 open applications using WinDriver. Please close all applications and press Retry. To reload WinDriver, press Cancel and reboot.
How do I solve this? |
|
The connection assistant dialog indicates that my USB Multilink or Cyclone is undetected even though I have connected the hardware to my USB port. What should I do? |
|
When I load the ICD debugger or PROG programmer, Norton Internet Security tells me it is attempting to access the internet, Why? |
|
I'm getting errors installing your latest Drivers on Windows XP 64 bit. I am seeing driver installation errors while installing Codewarrior 10.3 on Windows XP 64 bit. |
|
I cannot see PEmicro hardware interfaces under Windows 10 Anniversary addition, how do I update to latest PEmicro drivers? |
|
Are there any guidelines for using PEmicro's BDM Cables? |
|
I am using one of your MON08 interfaces to debug my target and also to supply it a clock across the ribbon cable. Supplying the clock couples noise into the other MON08 signals, how can I decrease this? |
|
I am having trouble programming the EEPROM block on a 908AS32A, 908AZ32A, 908AS60A, or 908AZ60A device? Is there an updated algorithm? |
|
How can I use CPROG to program dynamic data, such as a serial number, into my product where the number changes for each device I am programming? |
|
Is it possible to stop a running HC08 target? Whenever I issue a "stop" command to my running target, I seem to lose communication and I get the "Ping, Reset, Abort" dialog! |
|
I am unable to enumerate my USB-ML-MON08 RevB or USB-ML-12 RevA under the 32 bit versions of Windows Vista/7 or the 64 bit versions of Windows XP/Vista/7. |
|
|
|
|
|
|
|
|
In Stock
|
|
USB 2.0 Cable -Type A to Type B |
US$15.00 |
 |
|
In Stock
|
|
68HC908AB Development Board |
US$149.00 |
|
|
In Stock
|
|
USB 2.0 Extension Cable, 6 Ft., Type A Male to Type A Female |
US$15.00 |
|
|
In Stock
|
|
68HC08 Command-Line Programming Software |
US$129.00 |
|
|
In Stock
|
|
68HC08 Windows Integrated Development Environment |
US$199.00 |
|
|
In Stock
|
|
68HC08 Register File Viewer/Editor |
US$99.00 |
|
|
In Stock
|
|
68HC08 Command-Line Assembler |
US$149.00 |
|
|
|
|
© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement
(false)
|
Home
