|
|
|
 |
Product Details
|
 |
Compatible Hardware
|
 |
Learning Center
|
 |
Support & Downloads
|
 |
Buy now
|
 |
Supported Devices
Features
P&E has a resource page describing different methodologies for programming target flash in both development and production environments:
Flash Programming Resource Page
PROGPPCZ for Windows also includes the command-line version of the programmer software - CPROGPPCZ. Together they are perfect for development, production line programming, or field firmware upgrades.
- Program
- Verify
- Blank check
- Upload
- Display
- Erase
Prog programmers also support serialization:
System Requirements |
Windows NT/2000/XP/Vista/7/8/10
|
|
|
Compatible
Hardware:
|
Usage |
Multilink FX |
Cyclone |
Cyclone FX |
|
- Development
- Production Programming
- Test
|
- Development
- Production Programming
- Test
|
Prog Software Included |
|
|
|
Operating Modes |
|
- Tethered To PC
- Stand-Alone Programming
|
- Tethered To PC
- Stand-Alone Programming
|
Communication |
|
- Full-Speed USB 2.0
- Ethernet 10/100 baseT
- Serial Baud 115200 N81
|
- High-Speed USB 2.0
- Ethernet 10/100 baseT
- Serial Baud 115200 N81
|
Speed |
|
|
Extremely fast: Up to 25Mb/s
|
Power management |
Can provide 3V/5V via ribbon cable
|
- Can provide 1.8-5V via ribbon cable
- automatically switch up to 24V via internal
relays
|
- Can provide 1.8-5V via ribbon cable
- Automatically switch up to 24V via internal
relays
|
Automation |
Scripted programming using CPROG* (sold separately)
|
- Cyclone Automated Control SDK
- Scripted programming using CPROG*
|
- Cyclone Automated Control SDK
- Scripted programming using CPROG*
|
Models |
|
|
|
Extended Security Features |
|
|
- Anit-tamper Technology
- Limit programming to a date range
- Limit # of programming operations
|
On-board memory |
|
|
|
Expandable Storage |
|
|
|
*CPROG is included with Prog Software |
|
Tips
Chip Select Diagnostics for External Flash
PEmicro supports both internal flash and flash connected to an MCU via the SPI, I2C, and Address/Data bus interfaces. Programming algorithms must make assumptions about how the flash is connected to the MCU, but if these assumptions are off, the "Chip Select Diagnostics Mode" in our PROG software can help the user determine what changes may need to be made to the programming algorithm to match their device setup. Read more about how to use Diagnostics mode:
Chip Select Diagnostics for External Flash
|
Jump to: Documentation / Manuals Downloads FAQs Version info & Release Notes
|
|
|
|
|
|
FAQs |
 |
When using a programming algorithm to program an external flash device, is there a simple way to test the processor's chip select configuration to make sure it's configured properly? |
 |
I am getting an EPrivilege Exception when running PEmicro software. What is the problem? |
 |
I am attempting to program external flash connected to my embedded processor. Either the erase, program, or show module does not work. What is the most likely sources of problems? |
 |
I try to install your software, but installation fails with this message:
There are currently 2 open applications using WinDriver. Please close all applications and press Retry. To reload WinDriver, press Cancel and reboot.
How do I solve this? |
 |
When I run the command-line programmer which its path has a space in it, or run the programmer with a configuration file whose file name has a space in it, I get an error:
Error - Invalid command line parameter. ERROR 43 during script!
How do I fix this problem? |
 |
The connection assistant dialog indicates that my USB Multilink or Cyclone is undetected even though I have connected the hardware to my USB port. What should I do? |
 |
How do I transfer my existing software to another PC? |
 |
When I load the ICD debugger or PROG programmer, Norton Internet Security tells me it is attempting to access the internet, Why? |
 |
I am having trouble communicating with a PEmicro parallel port debug interface cable. What should I try? |
 |
I cannot see PEmicro hardware interfaces under Windows 10 Anniversary addition, how do I update to latest PEmicro drivers? |
 |
How do I activate my PEmicro software? |
 |
I am interested in launching the CPROGxx command-line flash programmer from my own application, and reading the resultant error code. Is there some simple way to do this from a Windows based application? |
 |
Does your software require administrative rights? |
 |
I launched the command-line CPROGxx flash programmer, saw a window flicker up, and then disappear. How do I know what happened? |
 |
How can I use CPROG to program dynamic data, such as a serial number, into my product where the number changes for each device I am programming? |
 |
My PROG and ICD are not working on my new computer. How much does it cost to upgrade my software? |
 |
I own PEmicro algorithms, software, or plugin. Where and how do I get the latest version? |
|
|
|
|
Product |
Version |
PROGPPCZ |
6.74.00.00 |
Release Notes:PROGPPCZ 6.74.00.00
30 January 2018
- Driver 12.7 supports Windows 10 Secure boot
- Version 9.40 bootloader and 9.74 firmware for USB-ML-Universal FX Rev B
####################################################
PROGPPCZ v5.74.00.00
8 January 2016
- Support for ELF/DWARF 3 and 4, and 64-bit ELF
- Includes WinDriver 12.2 to support Windows 10
####################################################
PROGPPCZ v5.21.00.00
4 February 2015
- Version 9.33 firmware and bootloader for USB-ML-Universal FX Rev B
- Version 7.85 firmware for Cyclone Max
- Fixed issue where some ELF data regions were skipped during programming
PROGPPCZ v5.13.02.00
October 31 2014
- Adds support for USB Multilink Universal FX Rev B
- Updates Cyclone Max firmware to 7.84
############################################
PROGPPCZ v1.62.00.01
May 14 2013
1.62.00.01 adds the following:
- adds Windows 8 support
|
|
|
|
|
In Stock
|
PROGPPCZ
|
Power Architecture 5xx/8xx Flash/EEPROM Programmer Software Single User License |
US$199.00
Volume Pricing...
Volume Pricing (Hide) |
Quantity |
Price |
1 |
US$199.00 |
2 to 4 |
US$199.00 |
5 to 9 |
US$169.00 |
10 to 24 |
US$139.00 |
25 or more |
Contact us |
|
|
|
|
|
|
Power Architecture 5xx/8xx BDM Interface (USB) |
US$249.00 |
 |
In Stock
|
|
USB Multilink Universal FX High-Speed Debug Probe for ARMĀ® devices and 8/16/32 bit devices: NXP's: Kinetis, LPC, S32, Qorivva, MPC5xx/8xx, Coldfire, DSC, S12Z, RS08, S08, HC08, HC(S)12(X), and STMicroelectronics SPC5 MCU's |
US$399.00 |
 |
In Stock
|
|
Programmer & Debug Interface for ColdFire V2-4, Power 5xx/8xx, Qorivva & STMicroelectronics SPC56, Kinetis, DSC, & MAC7xxx |
US$899.00 |
 |
In Stock
|
|
Power Architecture 5xx/8xx In-Circuit Debugger Software Single User License |
US$299.00 |
 |
In Stock
|
|
Power Architecture 5xx/8xx Library Routines (1 Developer, 5 Machine, Windows) |
US$299.00 |
 |
In Stock
|
|
Power Architecture 5xx/8xx Command-Line Assembler |
US$149.00 |
 |
|
|
|
© 2018 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement
(true)
|