| |
|
No description provided
|
 |
|
This product covers the following Part Numbers: CABLE_CFLV
|
|
PRODUCT INFORMATION
P&E's Shielded ColdFire Interface Cable provides access to the Background Debug Mode (BDM) on Freescale ColdFire microcontroller. It is the hardware interface between a standard IBM PC parallel port (DB25 female connector) and a standard 26 pin connector - the background mode header on a ColdFire target system. By using the ColdFire BDM Cable the user can take advantage of the background debug mode to halt normal processor execution and use a PC to control the on-chip resources. The user can then directly control the target's execution, read/write registers, memory values and program internal or external FLASH memory devices. The pin-outs of the BDM connector are specified by P&E. The ColdFire Cable is supplied in a small, protective, metallic-coated plastic shell.
Note: The CABLE_CFLV is intended for use in development. For a production environment, we recommend the Cyclone MAX.
KEY FEATURES:
- Full control of the on-chip resources via BDM
- Full speed in-circuit emulation at a reasonable price
- Programming for internal or external EEPROM/FLASH memory devices
- Works with P&E's ICDCF debugger and PROGCF programmer
- Separate versions available for 3V and 5V targets
- Very fast downloads and stepping
- NEW! Optional ribbon cable now available - see description to lower left.
- UNITCFZ interface library, demo, and .DLL interface for custom testers and software is available for purchase
Absolute Performance and relative download speeds to other P&E products:
| System Requirements |
Windows 95/NT
Windows 98/98SE/Me/2000/XP/Vista/7
|
|
|
| FAQs |
 |
On the ColdFire BDM cable connector, are the PST and DDATA signals used? |
|
I have secured my MCF5213 ColdFire device and can no longer access it. How can I unsecure it? |
|
For CABLECF and CABLECF_LV, at what voltage should my PC parallel port be operating? |
|
I wish to add a parallel port to my laptop to work with one of your parallel port debug cables. Is there a recommended one? |
|
I am getting an EPrivilege Exception when running P&E software. What is the problem? |
|
When I load the ICD debugger or PROG programmer, Norton Internet Security tells me it is attempting to access the internet, Why? |
|
What are the differences between a Rev. D/E Coldfire interface cable and a Rev. F Coldfire interface cable? |
|
Which ColdFire BDM cable do I need, CABLECF (5 volts) or CABLECF_LV (3.3 volts)? |
|
I am having trouble communicating with a P&E parallel port debug interface cable. What should I try? |
|
I try to install your software, but installation fails with this message:
There are currently 2 open applications using WinDriver. Please close all applications and press Retry. To reload WinDriver, press Cancel and reboot.
How do I solve this? |
|
When I run the command-line programmer with a configuration file whose filename has a space in it, I get an error. What is the problem? |
|
Are there any guidelines for using P&E's BDM Cables? |
|
I am attempting to program external flash connected to my embedded processor. Either the erase, program, or show module does not work. What is the most likely sources of problems? |
|
The connection assistant dialog indicates that my USB Multilink or Cyclone is undetected even though I have connected the hardware to my USB port. What should I do? |
|
I am running CF Flasher from Freescale. When I try to program my board with P&E USB-ML-CFE or CableCF, I get the message "Could not initialize BDM device." |
|
Where can I get more information about using the GNU compiler? |
|
|
| Documentation / Manuals |
|
ColdFire CABLE Rev F
(33 KB)
PE3309 - Technical summary for ColdFire CABLE Rev. F |
|
|
| Downloads |
|
 P&E Hardware Interface Drivers Version 9 (Windows 98/ME)
(26927 KB)
Installs P&E drivers to allow P&E applications to communicate with P&E hardware via the parallel port, PCI bus, Ethernet, Serial, and USB. This does not include the application level support which comes with the different products. This install will also work for Windows 2000/XP, but for these operating systems you should download v10 instead. |
|
ADDLPT - Specify/Use a PCI Parallel Port
(246 KB)
This utility allows P&E parallel port interface cables to make use of parallel ports which are specified by the user according to their address. This allows virtual or PCI based parallel ports which are not registered in the BIOS to be used. These settings
are remembered in the registry and are shared by different P&E applications. |
|
|
|
Product |
Version |
CABLE_CFLV |
F |
|
|
|
|
|
|
In Stock
|
CABLE_CFLV |
ColdFire BDM Interface (Parallel Port, 3.3V) |
US$199.00
Volume Pricing...
| Volume Pricing (Hide) |
| Quantity |
Price |
| 1 |
US$199.00 |
| 2 to 4 |
US$199.00 |
| 5 to 9 |
US$179.00 |
| 10 to 24 |
US$159.00 |
| 25 or more |
Contact us |
|
|
|
|
In Stock
|
|
ColdFire Development Package (CABLECF_LV and Software Package) |
US$749.00 |
 |
|
In Stock
|
|
ColdFire Development Package w/ GNU C Compiler (CABLECF_LV Interface and PKGCFZ_PRO) |
US$999.00 |
|
|
|
In Stock
|
|
Replacement GAL for CABLE_CFLV Rev.A-E |
US$30.00 |
|
|
In Stock
|
|
BDM Lightning - BDM Accelerator PCI Card |
US$449.00 |
|
|
In Stock
|
|
Replacement GAL for CABLE_CFLV, Rev. F (Surface Mount) |
US$30.00 |
|
|
|
|
26-Pin Ribbon Cable for ColdFire |
US$20.00 |
|
|
In Stock
|
|
ColdFire In-Circuit Debugger Software |
US$399.00 |
|
|
In Stock
|
|
ColdFire Command-Line Assembler |
US$149.00 |
|
|
In Stock
|
|
ColdFire Windows Integrated Development Environment |
US$199.00 |
|
|
In Stock
|
|
ColdFire Library Routines (1 Developer, 5 Machine, Windows) |
US$299.00 |
|
|
In Stock
|
|
ColdFire Regsiter Files |
US$99.00 |
|
|
In Stock
|
|
ColdFire Flash/EEPROM Programmer Software |
US$199.00 |
|
|
In Stock
|
|
BDM Lightning and CABLE_CFLV Package (w/DB25) |
US$499.00 |
|
|
|
© 2010 P&E Microcomputer Systems
Website Terms of Use and Sales Agreement
|
Home
