NEXT GENERATION Cyclone Programmers For Freescale Microcontrollers
|
The next generation of Cyclones is now available! P&E's Cyclone PRO and Cyclone MAX are flexible, affordable in-circuit flash programming solutions that excel in a demanding production environment, but are also perfect for development projects. After configuration, operation is a simple as one touch! Now we've taken these popular Cyclone tools and made them both easier to use and more powerful.
Cyclone PRO (Rev. C) and Cyclone MAX (Rev. B) now feature these new enhancements:
|
|
The Cyclone PRO and Cyclone MAX each support a variety of Freescale controllers. Together, the PRO and MAX provide powerful, affordable solutions across the Freescale controller continuum.
|
|
|
|
The Cyclone PRO and Cyclone MAX now include an LCD Menu Display! This is a terrific new feature that enhances the Cyclone's stand-alone capabilities. With the new LCD Menu Display, you can:
- Configure the Cyclone without a PC
- Quickly view and select from multiple programming images
- Easily perform programming operations in stand-alone mode
- Get direct feedback about programming results
|
|
|
No need to swap programming images! The internal memory of the Cyclone PRO and Cyclone MAX can now manage multiple images. Load several different programming images onto the Cyclone and choose between them using either the PC software or the LCD Menu on the unit itself.
|
|
|
|
P&E's software includes the ability to control the Cyclone via a command-line executable or a .dll.
COMING SOON! Ramp up the productivity of your production line! P&E will be introducing software that allows users to manage multiple Cyclones, both PRO and MAX, simultaneously. Any supported Freescale devices can be programmed in parallel, even if they are different devices with different data.
Contact P&E for information on controlling multiple units.
|
|
