PEmicro | Experts in Embedded tools for Flash Programming and Development

Thursday, August 27, 2020

Error 45 Multilink Universal
Victor Hugo V. Aug 27, 2020 at 01:34 PM (13:34 hours)
Staff: Takao Y.

6 comments

Hello,

I'm using a Multilink Universal Rev. D Part# USB-ML-UNIVERSAL to update some firmware on a equipment with a MC9S08QE32CLD and I get a error 45 (previously I used a USB -BDM Multilink Rev C and this error never appeared). I updated the drivers and firmware of the multilink and the error continues. 
I'm using a windows 10 home x64 and The PEmicro connection manager sees the connection OK. I don't know what else to do.

Could someone please help to solve this problem or provide me some information?

A helpfully at the earliest is appreciated
Thanks and Regards.

Victor.

Comment #1 Victor Hugo V. - August 27, 2020 - 01:34 PM (13:34 hours)

Comments

Greetings,

What software are you using and its revision? This is most likely a software to hardware incompatibility issue.


Takao

Comment #2 Takao Y. (PEmicro Staff) - August 27, 2020 - 01:54 PM (13:54 hours)

Hi, Takao

Thanks for you early response. I'm using PROGHCS08 1.79.00.00, is it the software do you refer?

Victor

Comment #2.1 Victor Hugo V. - August 27, 2020 - 02:09 PM (14:09 hours)

Greetings,

Yes, that is the software and version I am looking for. Your software is very old, from year 2012 and not able to support new hardware because concept of a Multilink Universal was not even invented yet! That USB-BDM Multilink Rev C is even older, around year 2010. 

With the new hardware, based on our release notes you must have minimum version: 
PROGHCS08 v6.94.00.00
25 July 2018
- Support for USB ML Universal Rev D
- Support for USB ML Universal FX Rev C
- Support for Intel HEX Extended Address Memory

Therefore you will need to upgrade your software version to get your multilink to work. The latest version we have released is 7.95.0.1:
http://www.pemicro.com/products/product_viewDetails.cfm?product_id=27


Takao

Comment #3 Takao Y. (PEmicro Staff) - August 27, 2020 - 02:29 PM (14:29 hours)

Hi, Takao

I have updated the software version (Now I am using PROGHCS08 7.95.00.00) and it seems that the error 45 was fixed, but now when I try to program I get a Error 1. Also, I tried to use the software PE Micro License Manager but it seems can not detect the Multilink. 

Do you know How could I fix this problem? 
Thanks.

Victor.

Comment #3.1 Victor Hugo V. - January 4, 2021 - 01:21 PM (13:21 hours)

Greetings,

All error numbers can be found in your PROG user manual. A whole chapter on it. Error 1 indicates cancellation by user. Are you sure you are using PROGHCS08, and not CPROGHCS08? Please use PROGHCS08 to debug all your issues.


Takao

Comment #4 Takao Y. (PEmicro Staff) - January 4, 2021 - 01:43 PM (13:43 hours)

Add comment

Want to comment? Please login or create a new PEmicro account.