Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
Programming NXP 9S12XS256 with Multilink Universal - Hiwave
Alessandro S. Nov 29, 2019 at 04:19 AM (04:19 hours)
Staff: Takao Y.

  • Hello,
    I need to flash a NXP 9S12XS256.
    My SW to flash is in format *.sx. Should it be in logical or physical format?
    I try to flash with Multilink Universal and it works (NO ERROR on LOAD) but the flashing process seems too much fast (less than 1 s for a 630 kB file).
    The SW doesn't RUN: after press PLAY the Hivawe Stops and shows BGND in the assembly file.

    thank you very much for the help.

    Best regards.




    Comments

  • Greetings,

    You must load a GLO or PHY file to program using PEmicro hardware for HC12 architecture only.

    Use the LOG2PHY file to convert your file:
    http://www.pemicro.com/downloads/download_file.cfm?download_id=15


    Takao

Add comment


   Want to comment? Please login or create a new PEmicro account.







© 2020 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement