Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
Cyclone MAX for NXP K22, ATSAMD51, STM32F1/L4 Series
Zafer Ö. Feb 6, 2018 at 05:55 AM (05:55 hours)
Staff: Takao Y.

  • Hi,

    We are using Cyclone MAX for NXP Kinetis KL15 and KL16 series.
    We will use NXP K22 series or ATSAMD51 or STM32F1/L4 for a new design.
    Can we use Cyclone MAX for below list?

    Thanks, best regards.

    Mn.    Mn. PN    Cyclone Max (OK/NOK)
    MICROCHIP   ATSAMD51J19A   
    MICROCHIP   ATSAMD51J20A   
    NXP    MK22FN512VLH12   
    NXP    MK22FN1M0AVLH12    
    NXP    MKL15Z128VLH4    OK
    NXP    MKL16Z256VLH4    OK
    ST    STM32F103RET6   
    ST    STM32F103RGT6   
    ST    STM32L471RET6   
    ST    STM32L471RGT6




    Comments

  • Greetings,

    The cyclone max will only support NXP devices. Therefore...

    Mn. Mn. PN Cyclone Max (OK/NOK)
    MICROCHIP ATSAMD51J19A NOK
    MICROCHIP ATSAMD51J20A NOK
    NXP MK22FN512VLH12 OK
    NXP MK22FN1M0AVLH12 OK
    NXP MKL15Z128VLH4 OK
    NXP MKL16Z256VLH4 OK
    ST STM32F103RET6 NOK
    ST STM32F103RGT6 NOK
    ST STM32L471RET6 NOK
    ST STM32L471RGT6 NOK

    Look into using our current trade-in program to get an upgraded hardware like the cyclone universal:
    http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320172

    However, if you find yourself only support ARM in the future, you may want to look into getting the cyclone for ARM devices instead (Cyclone ACP).


    Takao Yamada

  • Thank you very much for the answer, Takao.

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2018 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement