Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
Can read/write internal flash but can't with external
tr q. Feb 4, 2018 at 10:31 PM (22:31 hours)
Staff: Johnny N.

  • I have a custom circuit use MPC5566 with flash s29al016j addr11 to 31, CS0,WE0,OE.
    I use PE multilink universal with Proppcnexus programer V6.71.00.00, it can detect MPC55XX and read/write internal flash with Freescale_MPC5566_1x32x768k_Freescale_H7F_32_Driver.PCP programming algorithm.
    I try to load Spansion_29AL016J_01_1x16x1meg_Qorivva.PCP programming algorithm, the programmer loading done and can show module data but all data is zero.
    I use oscilloscope to debug CS0,WE0,OE pin,all pin alway logic high don't change although Programmer show reading with addr increment.
    I try to load another algorithm but the same.
    Any one have some idea.
    Thanks




    Comments

  • Greetings,

    You might need a custom algorithm for your board.

    There is no need to contact us repeatedly in a short period of time regarding this issue. We received your support ticket and an engineer has been assigned to work on the problem with you. Please give him a reasonable amount of time to investigate the issue and get back to you. Any further updates will be provided to you in the support ticket.

    Regards,
    Johnny
    PEmicro

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2018 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement