Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Using Cyclone fx flash barcode number into target hardware
Deep G. Dec 1, 2017 at 02:35 AM (02:35 hours)
Staff: Esteban G.

  • Hello,

    We’re using cyclone FX for our production programming of mkw01 based devices. We need to flash barcode number into mkw01 devices. Each device will have a unique ID based on the attached bar code.

    So far, we’ve been able to choose the correct image based on the bar code filter but writing to flash section of mkw01 isn’t working. we just don’t know how to give memory address for barcode data and invoke it. Using serialize software we are able to write *.ser file into flash memory but how to write barcode data?

    programming script that use with image is as below,
    CM freescale kw01z128m4_1x32x32k_pFlash.arp
    ss *.out
    EM
    PM

    please help us figure this one out?

    Thanks.




    Comments

    • Hi,

      To program the barcode to memory you need to use a Program Feature command. This command may not yet be enabled for the product you are using. If you provide me with an email address I can reach you at I can update you when we have enabled the Program Feature function in the following weeks.

      Esteban

      • Hello,

        Thank you for reply.

        please note my email id - deep.gadhia@dspworks.in

        product using - CYCLONE_UNIVERSAL_FX

        Target board to program with barcode - MKW01z128

        Let me know updates. Thanks again.

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement