Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Cyclone PRO error $00000007
sakshi s. Nov 20, 2017 at 02:41 AM (02:41 hours)
Staff: Takao Y.

  • hi i am using cyclone pro from last two years it was working fine . i purchased the same cyclone pro last month this time name of cyclone was crux. now when i am trying to programme it . it is showing error  $00000007




    Comments

    • hi
      after giving power supply (system power) and connecting jumper on 2 and 3 pin
      and proper connection with micro controller showing same error :(

  • Greetings,

    The name of the cyclone will not affect your project. It simply gives your cyclone a name to differentiate from other cyclones you may buy.

    Error $0007 indicates problem communicating to the chip. Check your connection and power. If you switch between the 2 cyclones without any changes to setup, do you still see the error?

    Next step is to debug your issue using the PROG software found in your cyclone software package. There is a PROG version for each chip architecture, so choose the one that works for your device. Try replicating the same steps as your standalone image and see if you can identify the error.


    Takao Yamada

  • Greetings,

    What are you seeing when you try using the PROG software?


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement