Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Hardware and Software compatible
Ning H. Nov 13, 2017 at 09:58 PM (21:58 hours)
Staff: Takao Y.

  • ICDPPCNEXUS Debugger,PROGPPCNEXUS programmer,i bought these two software . Can it be used on the new hardware Cyclones?




    Comments

  • Greetings,

    You should check the release notes of each software to know if your hardware is supported. Go to their product pages and there is a section for release notes. Most likely your cyclone universal will work with the software if it was purchased within the last year.


    Takao Yamada

  • Can you check for me ? I want to buy the new Cyclones hardware ,which release on your website ,but want to know if the software ICDPPCNEXUS Debugger,PROGPPCNEXUS programmer can be used with it .

  • Greetings,

    You have not indicated your software version so I have no idea whether your software will work. Find out the software version by simply opening the software and looking at the top of the software title bar.

    ICD software release:
    http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320116&productTab=2

    PROG software release:
    http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320089&productTab=3


    Takao Yamada

  • Greetings,

    Any update on this? Were you able to find out if you software version can support your cyclone?


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement