Create new topic
Hello,How can we convert old SAP images format from Cyclone MAX/PRO to Cyclone FX universal? Thanks
Hello,I just downloaded a latest Cyclone software (Image creation Utility Version 6.58.00.00). I open P&E Cyclone Universal Programmer, but don't see the program using to convert old SAP file from Cyclone MAX/PRO to Cyclone FX new SAP file?Please helpThanks
Greetings,Have you checked the cyclone user manual about the converter? It will tell you which software to open and how to use it. If you downloaded the latest cyclone software package, then you have the utility to use the SAP_Converter utility.Takao Yamada
Greetings,Thanks for your comment#3, Yes I opened sap_convert_console.exe under ImageCreation folder, but this program doesn't open, I tried to click it many times.Thanks
Greetings,Again, read the user manual. Have you found the user manual in your cyclone folder? Takao Yamada
Hello,Yes I followed the instruction below but it says the SAP Converter is not recognized.13.2.1 How Do I Use SAP_Convert_Console.exe?SAP_Convert_Console.exe is a Windows command line utility and the software must be runthrough the Windows Command Prompt. The utility can be found in the same folder as theCyclone’s software install path.The command line parameter syntax:>SAP_Convert_Console [old_SAP_path] [new_SAP_path]User Manual For CYCLONE FX Programmers 110Where:[old_SAP_path] The relative or full path to the SAP file. Usually has the .SAP fileextension.[new_SAP_path] Optional parameter where the user can specify a relative or full path todump the output of the conversion. If path and file name matches theinput, then the output file will replace the input file. If this parameter is notspecified, the output will be dumped in the same path as the input filerenamed with postfix “_2”. For example if the input is myfile.SAP, then theoutput will be myfile_2.SAP and will not replace the original input file.
Greetings,Did you open a Windows command prompt, instead of double-clicking on the utility? What is the command-line parameter you used to start the conversion?Takao Yamada
Hello,Yes I did get open a Windows comment prompt" >PEMicro\cyclone\imageCreation\sap_convert_console.exe Application for conveting Cyclone images Version 6.58.00.00 copyright 2017, P&E Microcomputer Systems Example usage: sap_convert_console oldImageFileName.sap newImageFileName.sapI tried to type and enter my old SAP image, the message says:'Windows' is not recognized as an internal or external command,operable program or batch file.
Greetings,So you tried calling the software like:>sap_convert_console.exe myinputfile.SAP myoutputfile.SAPAnd you got an error?Takao Yamada
Hello,Yes, I entered this:C:\>sap_convert_console.exe 36757502015S_W_.SAP myoutput.SAPThe error below'sap_convert_console.exe' is not recognized as an internal or external command,operable program or batch file.
Greetings,You should change the directory so that you are in the correct folder. Your Sap_convert_console.exe is not located within the C drive. You should be calling it like this:C:\>PEMicro\cyclone\imageCreation\sap_convert_console.exe 36757502015S_W_.SAP myoutput.SAPTakao Yamada
Hello,I followed your informationC:\>PEMicro\cyclone\imageCreation\sap_convert_console.exe 36757502015S_W_.SAP myoutput.SAPCannot find original file myoutput.SAPError --- Error Code 1C:\>PEMicro\cyclone\imageCreation\sap_convert_console.exe 36757502015S_W_.SAPCannot find original file 36757502015S_W_.SAPError --- Error Code 1
Greetings,You need to put the full path to your SAP image. And since I do not know where that is you need to figure that out. For example, C:\>PEMicro\cyclone\imageCreation\sap_convert_console.exe C:\myfolder\inputfile\36757502015S_W_.SAP C:\myfolder\outputfile\myoutput.SAPTakao Yamada
it worked. Thanks for your help