Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
Open SDA Debug Driver not working on windows
aakash k. Oct 15, 2017 at 12:02 AM (00:02 hours)
Staff: Zahar R.

  • I am trying to use the KL25Z FRDM board, the open sda driver does not get installed properly on my machine. I am using a windows 10 machine. The Open SDA CDC COM port is installed properly. When I try to debug from the KL25 FRDM board in KDS , the open embedded debug-USB port does not find a port. The board does get detected as a mass storage device. 
    http://tinypic.com/r/mj0228/9 has the device manager screen shot and http://tinypic.com/r/5v42lk/9 shows the KDS debugger screen.




    Comments

  • Hi Aakash, 

    I just want to follow up to see if you are still having an issue described in this post.

    If you are, please go to mass storage device drive and post the contents of SDA_INFO.HTM file into this post.

    Can you please download and install the latest PEmicro drivers v12.7 from our website:

    http://www.pemicro.com/support/downloads_find.cfm

    What version of PEmicro plugin are you running under KDS? You can find out by going to Help -> About -> Installation details and you will see the version number of PEmicro plugin currently installed under IDE.

    Best Regards,
    Zahar
    P&E

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2018 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement