Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
cprogppcnexus_cyclone.exe window commandline Error
dominic g. Sep 28, 2017 at 07:11 AM (07:11 hours)
Staff: Takao Y.

  • Hi PEMICRO,

    I am trying to use cprogppcnexus_cyclone.exe (version 6.22.2.0) to program MPC5566 part with the Cyclone Universal Programmer and it gave me an error as below.

    progppcnexus_cyclone.exe (GUI) is working fine with CM (Choose Module).


    Any advice on this error?

    <logfile>
    CYCLONE detected - Flash Version 9.80
    CMD>RE
    Initializing. -Target has been RESET and is active.
    CMD>CM Freescale_MPC5566_1x32x768k_Freescale_H7F_32_Driver.PCPThis version of PR
    OG requires a Cyclone.

    .PCP file does not exist.?
    ERROR 41 during script!

    -------------------------------

    <MPC5566_ERASE.CFG>
    RE
    CM Freescale_MPC5566_1x32x768k_Freescale_H7F_32_Driver.PCP
    EM
    BM

    -------------------------------

    <MPC_ERASE.BAT>
    C:/PEMicro/cyclone_universal/InteractiveProgrammer/cprogppcnexus_cyclone.exe MPC
    5566_ERASE.CFG INTERFACE=CYCLONE PORT=USB1 /logfile Programming/mn8_erase_log.tx
    t




    Comments

  • Greetings,

    As the error indicates, it is having issues looking for the PCP file. Does this file exist in the same folder as your CPROG software? Or is it located in the algorithms folder? Try specifying the full path to the algorithm.


    Takao Yamada

    • Using the full path works.
      Thanks for your help.

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement