Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
PROGDSC turn off with WIN10
Luca P. May 18, 2017 at 01:57 AM (01:57 hours)
Staff: Juan S.

  • Good morning,

    I recently replaced the pc with operating system (WIN. 10).
    Hardware interface: USB Multilink Universal
    Device: MC56F82323

    The initializing it's successful, but the function "erase module" turn off the PROGDSC Programmer (Ver.6.19).

    While using CPROGDSC this is the log:
    Initializing. -Initialized.
    ;version 1.06, 01/27/2014, Copyright P&E Microcomputer Systems, www.pemicro.com [mc56f82326]
    ;device freescale, mc56f82323, 1x16x16k, desc=pflash
    ;begin_cs device=$00000000, length=$01008000, ram=$0000F000
    Loading programming algorithm ... Done.
    CMD>HE
    Look at file cprog.doc for program information.
    CMD>EM                              ; erase module
    Erasing. -Module could not be erased.
    ERROR 24 during script!

    Thank you.
    Best regards




    Comments

  • Hi Luca, 

    In your script, are you defining the device? An example is below:

    :DEVICE MC56F82326
    CM C:\PEMicro\PROGDSC\Algorithms\freescale_mc56f82326_1x16x16k_pflash.dsp
    EM
    BM

  • Hi Juan,

    this is cfg:

    ; Programming for 15002 board
    :DEVICE MC56F82323                        
    RE                              
    CM C:\pemicro\PROGDSC\Algorithms\freescale_mc56f82323_1x16x16k_pflash.dsp   
    HE
    EM                              
    BM                              
    SS /PARAM0                        
    PM                              
    VC                              
    VV /PARAM1                        
    ;VM

  • Hi Luca, 

    When calling CPROGDSC.exe, could you please add the following:

    bdm_speed 22

  • Thank you. I resolved adding a delay time.

    Best Regards

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement