Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
"The Hardware interface that you are using does not support NXP processors."
Louis P. Mar 28, 2017 at 08:11 AM (08:11 hours)
Staff: Kevin M.

  • I have this erro message when I'm trying to use the multilink universal FX on the F port with a Mbed 1768 on LcpXpresso.
    Is it my multilink Hardware which is to old ?

    I put the supportFiles_Arm folder under PEMICRO\multilink_universal
    but it doesn't help.


  • Louis,

    What revision is your multilink FX?

    • REV A

  • Louis,

    Can you email me a picture of the error message?

    kevin (dot) meyer (at)

  • Hi... as per my knowledge the LPC3180 is an ARM9-based microcontroller for embedded applications requiring high performance combined with low power dissipation. It achieves these objectives through the combination of NXPs state-of-the-art 90 nanometer technology with an ARM926EJ-S CPU core with a Vector Floating Point coprocessor and a large array of standard peripherals including USB On-The-Go.

  • The multilink fx rev a does not support the device in question.

Add comment

   Want to comment? Please login or create a new PEMicro account.

© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement