Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
ICDPPC Nexus - Debugger for MPC5777C
Siva S. Feb 17, 2017 at 01:57 AM (01:57 hours)
Staff: Takao Y.

  • Hello Sir,

    I have been working on Mamba-MPC5674F micro.
    Below are the flash program and in circuit debugger being used for the MPC5674F micro

    Flash programmer : PROGPPC Nexus - Programmer
    In circuit Debugger: ICDPPC Nexus - Debugger.

    Now we have moved to Cobra55-MPC5777C micro.
    I have downloaded the respective flash algorithms and the debug script files of MPC5777C micro.

    My question is:

    The current ICDPPC nexus debugger version is 1.25.00.00 which I am using for Mamba.

    Could you please let me know the ICDPPC-Nexus v1.25.00.00 will work Cobra55-MPC5777C micro ? OR Do I need to use latest version of ICD-debugger ?

    If yes, can you plese let me know the version of ICDPPC-Nexus for MPC5777C ?

    Regards,
    Siva.S




    Comments

  • Greetings,

    If you ever have question whether your software will work with a PPCNEXUS device, there are 2 easy ways to find out.

    1) Check the release notes:
    http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320116

    Go to support & downloads tab and check to see what version of software supported the MPC5777C device. We do support the chip.

    2) Check your algorithms folder of the software you currently have. For PPCNEXUS devices, I add in support in both software and algorithms at the same time. So if your folder does not have MPC5777C, then the software will not support it.


    Takao Yamada

    • Hello Takao,

      Thank you very much for your information.
      I will go through the link.

      Regards,
      Siva.S

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement