Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
ST_STM32F437ZI_1x32x512k.arp File issue
Kaustubh K. Nov 29, 2016 at 12:03 AM (00:03 hours)
Staff: Kevin M.

  • Hello,

    We are trying to program STM32F437ZIT6 IC with the help of Cyclone FX programmer.

    The Blank IC's are programmed but when we try to reprogram these IC's after power reset, we are unable to program them.

    So instead we tried to at least erase the complete module and received "Module could not be erased. ERROR 24 during script!" message window.

    We tried and unprotected the module with the help of command "UP" but still were not able to erase module. Contents of our config file are given below:-

    :DEVICE ST_STM32F4_STM32F437ZI
    :useswd 1
    RE
    UP
    CM C:\PEMicro\PROGACMP\supportFiles_ARM\ST\STM32F4\ST_STM32F437ZI_1x32x512k.arp
    EM
    BM
    SS path\program_file.S19
    PM
    VM
    VC


    Please enlighten!

    If possible please provide email ID so that we can have direct communication (Only for PEMicro Technical Team)




    Comments

  • Kaustubh,

    Did your initial programming image secure the device or write protect?

    Feel free to email me at kevin (dot) meyer (at) pemicro.com

  • Issue resolved by switching order of commands. Working Sequence:


    :DEVICE ST_STM32F2_STM32F205VE
    :useswd 1
    RE
    CM C:\PEMicro\PROGACMP\supportFiles_ARM\ST\STM32F2\ST_STM32F205VE_1x32x128k.arp
    UP
    EM
    BM
    SS path\program_file.S19
    PM
    VM
    VC

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement