Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Programming Flash JS28F256M29EWL throught a ColdFire processor MCF5208
Oscar A. May 12, 2016 at 08:40 PM (20:40 hours)
Staff: Mikhail A.

  • Hello

    I have a problemm when I try to Erase the device, into the programmer shows me
    the error #2003, and into the software "PROGCFZ - Flash Programmer" shows me
    the error "Module could not be erased".

    I am using the algo "Micron_28F256M29EWL_1x16x16meg_5207_8.cfp", but I have
    tried with the other similars algos but is the same.

    Also I have changed the BDM freq, but doesn't works.

    I have comunication with the processor, and I can read the memory, but not
    erase.

    Please your help ASAP.

    Best Regards




    Comments

  • Dear Oscar,

    What is the P&E interface you are using? Also what is the version of the PROGCFZ you using and your computer Operating System?

    Regards,
    Mikhail
    P&E

    • Hi Mikhail

      I am using the Cyclone Max with FW version, v07.92-6.2, version of PRGOCFZ v5.74.00.00, and my OS is Windows 8.1.

      As an extra commente into stand alone mode I can't erase.

      Best Regards

  • This was resolved in a Support Request that required an algorithm change.

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement