Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

Please accept the use of cookies on our site

At PEmicro we use web browser cookies in order to provide you with an enhanced experience and in order to be able to do things like shopping cart processing and identify you when you login to our website.

Click here to accept

search inside this forum
search inside all forums
Flashing MK20DX256VLH7
nishant p. May 6, 2016 at 02:13 AM (02:13 hours)
Staff: Takao Y.

  • How the other ends of cyclone flasher is connected with 64LQFP IC.


  • Greetings,

    Usually your chip is soldered onto a board where there is a header. This header should be either a 20-pin, 20-pin mini, or 10-pin mini connection.

    The recommended connection is 20-pin mini if you wish to use JTAG or SWD. Or you can use the 10-pin mini for SWD.

    10x2 Straight Header 0.05" Keyed
    part #: Samtec FTSH-110-01-F-D-K

    5x2 Straight Header 0.05" Keyed
    part #: Samtec FTSH-105-01-F-D-K

    Takao Yamada

  • Thanks for the reply but if I want to burn or flash the chip before putting into my customize board, for that is there any solution.

    Also, let me know for MK20DX256VLH7 what are the connections and how can I burn my hex code into fresh new chip.

  • Greetings,

    We specialize in in-circuit programming. What you could do is create a socket programming board where a socket can be used to load/eject your chip and have it connected correctly to our flash programming interfaces. You will need to do the research yourself of which sockets to purchase.

    You still need the header I mentioned earlier.

    Please download our user manual for the cyclone to learn how it works and how to connect it to your chip. Go to chapter 3 "Cyclone Hardware":

    Takao Yamada

Add comment

   Want to comment? Please login or create a new PEMicro account.

© 2018 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement