Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Issue transitioning from USB-ML-PPCNEXUS to USB-ML-UNIVERSAL-FX
Dan B. Feb 19, 2016 at 11:05 AM (11:05 hours)
Staff: Takao Y.

  • I am transitioning from using discontinued USB-ML-PPCNEXUS to USB-ML-UNIVERSAL-FX. When I try to program an MPC5634, I get the error "Error loading .PCP file : C:\Program Files\PEMicro\PROGPPCNEXUS\Algorithms\Freescale_MPC5634M_1x32x384k_LCFlash.PCP at address 00300001" I previously had no issues programming using USB-ML-PPCNEXUS. I am using PROGPPCNEXUS Version 1.42.00.01. Any suggestions?




    Comments

  • Greetings,

    The USB ML Universal FX is a much faster device. So you should slow down the debug shift speed to be able to establish a stabler connection. Open up the PROG software and the option should be in the connection manager. My experience is that selecting option 5 (roughly 4MHZ) has given me the most success.

    Let me know if that worked for you.


    Takao Yamada

  • Greetings,

    Any update on this? Did the shift frequency solve the issue?


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement