Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Cyclone Firmware downgrade
Lenied A. Feb 18, 2016 at 03:57 PM (15:57 hours)
Staff: Takao Y.

  • How can I downgrade the firmware of a cyclone pro?




    Comments

  • Greetings,

    We do not recommend downgrading the firmware. Is there a problem you are facing with a newer firmware?


    Takao Yamada

    • Yes, one of our product is failing on error 4003

  • Greetings,

    And this was not an issue in the past? Within the cyclone software package, look for the PROG software for your chip architecture and try to do a step-by-step flash programming session. See if you can replicate the issue using the VC command, which is where it is failing.

    Error $4003 = VC operation failed.


    Takao Yamada

  • No, this was not an issue in the past.

  • Greetings,

    What did you find when using the PROG software.


    Takao Yamada

  • Greetings,

    Could I get an update on this? Were you able debug this issue?
    I have updated our software recently for the cyclone Pro and cyclone max. Please use the following link to get the latest:
    http://www.pemicro.com/support/download_processor.cfm?type=4


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement