Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
USB-ML-CFE Rev.C undetected in PROGCFZ
Markus G. Sep 10, 2015 at 11:14 AM (11:14 hours)
Staff: Takao Y.

  • I try to use PROGCFZ V1.68 on Windows 7/64 Bit together with USB-ML-CFE Rev.C
    After starting PROGCFZ the PROG-Connection Assistant always Shows
    "Port: Undetected. Disconnect/Connect USB cable. Click Refresh List."

    The drivers seem to be installed correctly: no errors in Device-Manager.
    Results of the P&E driver-test-tool:
    (detected) C:\windows\system32\drivers\windrvr6.sys (Version 11.07)
    (detected) C:\Windows\syswow64\peusbmgr.dll ()
    (detected) C:\Windows\syswow64\peusba05.dll ()
    (detected) C:\Windows\syswow64\peusba06.dll (Version 11.07)
    (detected) C:\Windows\syswow64\peusba07.dll (Version 11.01)
    (detected) C:\Windows\syswow64\peusba08.dll (Version 11.07)
    (detected) C:\Windows\syswow64\peusbb05.dll (Version 10.01)
    (detected) C:\Windows\syswow64\peusbb07.dll (Version 11.01)
    (detected) C:\Windows\syswow64\peusbb08.dll (Version 11.07)
    No errors were detected. Your P&E drivers are correctly installed.

    Any suggestions?




    Comments

  • Greetings,

    As you may find in other forum threads, if your software was built before year 2010, then your software is too old to work on Windows 7 and 64-bit machines. Even if you install the latest drivers, the software does not have the latest libraries to work on the latest operating systems.

    Check the PROGCFZ software and check the last modified date. If the date is before year 2010, then your software is too old.

    Our software upgrade policy is you get free updates within a year of purchase. Within 2 years you can get a 50% discount on upgrades. If you believe you are entitled to a discount, please let me know of the order/invoice number of your software purchase. Otherwise, you will have to purchase a new license:
    http://www.pemicro.com/products/product_viewDetails.cfm?product_id=99


    Takao Yamada

  • Hi Takao

    Thank You for Your help.
    I installed the 64K Starter Edition of the PKGCFZPRO_USB now.
    The communication between PROGCFZ (V5.13.02.00) and my Multilink USB-ML-CFE seems to work fine. After erasing the Coldfire 5212, I try to program the module.
    But I always get the error:
    Programming Adress $ Error - out of Memory.
    . Error during programming. ($00000000)

    Kind regards,
    Markus

  • Greetings,

    As you noticed, the software is 64K code-size limited. If you hit the "Out of memory" error, then you have exceeded that limit.

    You need to purchase a full version of the software to get it working correctly.


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement