Stand-Alone Flash Programming
Create new topic
What's the current spec of the power supply used to power Cyclone Pro Rev. B?
Greetings,The website is here if you need to buy one:http://www.pemicro.com/products/product_viewDetails.cfm?product_id=14730000The specs are:INPUT: 100-240V~, 50-60hz, 0.6AOUTPUT: 6V --- 2.5A Center PositiveRoHS compliant.Takao Yamada
Related... The new Cyclone_PowerPack from PEMicro only puts out 9V or 12V.. and lists 3W typical for the Cyclone Pro.Is Cyclone Pro happy with 9V or 12V from this power pack (instead of the 6V, 2.4A power brick - or the older 6V PowerPack)?Thank you,Chip
Greetings,The Cyclone Pro can handle 9V and 12V just fine. The older 6V external battery power pack was discontinued and we sell the newer 9V and 12V. We would not be selling it if it could not be handled by our cyclones! This power pack will also be able to power our future cyclone products that are lining up this summer. Stay tuned!Takao Yamada
OK.. Thank you!