Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Flashing through the parallel port BDM in administration mode
satya r. Nov 11, 2014 at 09:58 PM (21:58 hours)
Staff: Johnny N.

  • i am using the parllel port BDM for flashing but it flashes only in the administrative mode that is with all the privilages, but i have limited privilages. How to overcome this problem? that is flash with limited privilages of the computer.

    thanks and regards,
    satya




    Comments

  • can you please provide some solution for this?

    • Greetings Satya,

      What is the error that you are seeing when you try to flash from a non-administrative user account.

      -Johnny
      P&E

      • Hi,
        Thank you for the reply.

        Please find the error i am getting in the command window
        Warning - Exception Occured. (PE.28)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.29)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.29)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.29)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.29)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.29)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Startup command file does not exist.
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        Warning - Exception Occured. (PE.12)
        Exception Message : Privileged instruction
        No Link To Target

        in>

        But for the first time if i flash through administrator mode then again logoff and then use the normal mode it flashes successfully.

        How to avoid this problem.

        Thanks and regards,
        Satya

        • Hi Satya,

          What Operating System are you using?

          What software are you running exactly?

          Which P&E hardware tool are you using?

          I just ran a test on a Windows 7 64 bit PC with a Standard User account that does not have any admin rights. On the account, I was able to program flash fine with one of our PROG applications using a USB Multilink. While installing the software initially, I had to enter in my admin account details but afterwards I could run it without. I don't have a PC on hand to test parallel port right now.

          Regards,
          Johnny
          P&E

  • Hi Johny,

    Thank you for the mail.

    operating system : windows 7
    Software: i am debugging through the codewarrior Hiwave.exe software that is flashing and debugging.
    P&E: BDM-Multilink parallel port

    I dont know if it is a problem with the installation of codewarrior.

    Thanks and regards,
    Satya

    • Satya,

      Thank you for answering my questions. There are a few issues.

      We don't officially support the Parallel port BDM Multilink on Windows 7. You can see a list of supported OSes under System Requirements here:
      https://www.pemicro.com/products/product_viewDetails.cfm?product_id=32

      I recommend you migrate to one of our USB options, either USB-ML-12 or USB-ML-UNIVERSAL, if you have to stick with Windows 7.

      Codewarrior/Hiwave is not P&E's software. It was developed by Freescale. I don't know how much testing they did, if any, running Codewarrior on non-admin accounts.

      As a sanity check, I actually changed my account on my Windows 7 PC from admin to a Standard User. Then I ran Codewarrior V6.3 and the Hiwave debugger. I was able to program and debug my HCS08 board with a USB-ML-12. There were no error messages related to privileges.

      Do you have a USB-ML-12 that you can test?

      Regards,
      Johnny
      P&E

  • Ok i will work with admin rights. In future i will try in other machine and if the same issue occurs i will try to report. As of now you can cosider the issue as closed.

    Thanks for the support,
    Regards,
    satya

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement