Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
Cable CF Adapter Connection
Dan R. May 9, 2014 at 03:08 PM (15:08 hours)
Staff: Keith M.

  • I am using the Cyclone Max in a system with a Coldfire MCF5206E processor. I know that the MCF5206E requires the Synchronous Cable-CF-Adapter and I have the cable. However, I can find no indication in the documentation that I have as to which end of the cable plugs into the Cyclone, and which end plugs into the debug port. I don't want to take a chance on smoking a $50 cable, so please either tell me which end goes where, or point me to the correct documentation that will give me adequate instruction. 

    Thank You.
    Dan




    Comments

  • Hi Dan,

    I asked engineering and they indicated that the end with the circuit board adapter plugs into your target, and the standard end plugs into the Cyclone MAX. Thank you very much for pointing that out, we will be updating our documentation.

    Thank you,
    Keith

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2018 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement