Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
reset after programming
Jörg V. Jan 31, 2014 at 07:22 AM (07:22 hours)
Staff: Johnny N.

  • Hi,
    I'm using CodeWarrior 10.4, PE multilink universal and Kinetis K10.
    Problem: after programming the MCU over the JTAG interface, the MCU doesn't restart automatically. I have to turn off and on the power or pull down the reset line.
    Question: is there a way that the PE multilink universal pulls down the reset line after programming is finished?
    Thanks




    Comments

    • Hi Jorg,

      The Codewarrior 10.4 debugger has a 'Go' button (the Green arrow) that will execute the code. Is there a reason why you can't use that?

      We also sell a programming application called PROGACMP that has a similar capability if you don't want to use Codewarrior. You can create a programming script with a 'GO' command. This will not work if the device is secured.

      Regards,
      Johnny
      P&E

      • Hi Johnny,
        the 'run' command, that's it. Sorry, I'm new to CodeWarrior and I was not aware of this command in the middle of the debug commands (because in the end it's not debugging).
        Thanks for the hint.

        regards
        Jörg

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement