Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Write impossible in Flash zone 1080-17ff on DV96
Claudio A. migrated on Dec 31, 2013 at 11:00 AM
No staff assigned yet

  • Hi Guys,
    could someone help me with the topic I'm going to explain?

    I have a Sw developed for MC9S08DV96, which can be loaded (in the uC) in two ways:
      Run HiWave (PC connected to the PCB through a USBMultilink) + Load BootLoader Sw + Run Bootloader itself + download the above mentioned Sw through the Bootloader. With this procedure everything works and the Sw part that should stay in FLASH range 0x1080-0x17FF is correctly written.
        Run HiWave (PC connected to the PCB through a USBMultilink) + Load an abs file containing the merge between BootLoader and the above mentioned Sw (note that HiWave says that all the addresses have been loaded well). With this procedure nothing works and the Sw part that should stay in FLASH range 0x1080-0x17FF is NOT written. WHY? How can I avoid this?

        Thank You in advance.







        Comments

      Add comment


         Want to comment? Please login or create a new PEMicro account.







      © 2017 P&E Microcomputer Systems Inc.
      Website Terms of Use and Sales Agreement