Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
P&E Virtual Serial Toolkit
Tong L. migrated on Dec 31, 2013 at 11:00 AM
No staff assigned yet

  • Hi,
    I have problem with the P&E Serial Toolkit. I am using 64 bit Windows 7, and the virtual com doesn't work.
    I can not open the USB serial port.
    Is there an update so it works with windows 7 64 bit?
    Thanks





    Comments

  • QUOTE (GaQuay @ Jun 11 2011, 08:17 AM) [legacy comment]
    Hi,
    I have problem with the P&E Serial Toolkit. I am using 64 bit Windows 7, and the virtual com doesn't work.
    I can not open the USB serial port.
    Is there an update so it works with windows 7 64 bit?
    Thanks


    Any update on this issue? I am experiencing the same.



  • I don't know jack about ARM, I've been using 12's and ColdFires for the past decade, so I don't know what inspired me to look at this forum...
    But I had a related problem with the new 64-Bit Windows 7.
    I could not even install the virtual COM tool on Windows 7 64-bit, so Jonny provided me with an update, and now the virtual COM utility is working fine.
    See my thread in the 68K/ColdFire forum.

    Tom_too


  • I'm having this problem. Any information on a fix?

    I just updated to P&E OSBDM OSJTAG Virtual Serial Toolkit with Terminal Window v2.05

    I can flash the board fine, but I can't connect to the USB COM port. It keeps telling me to connect demo board.

    I am connecting to J13 on TWR-K60N512 board. This powers it and can flash it fine.

    This is doubly annoying since I just moved from 32 bit windows 7 to a 64 bit windows 7 machine.

  • QUOTE (JoeP @ Oct 3 2011, 01:36 PM) [legacy comment]
    I'm having this problem. Any information on a fix?

    I just updated to P&E OSBDM OSJTAG Virtual Serial Toolkit with Terminal Window v2.05

    I can flash the board fine, but I can't connect to the USB COM port. It keeps telling me to connect demo board.

    I am connecting to J13 on TWR-K60N512 board. This powers it and can flash it fine.

    This is doubly annoying since I just moved from 32 bit windows 7 to a 64 bit windows 7 machine.


    There is a 64 bit compatible version of our terminal utility in the P&E Kinetis OSBDM toolkit which you can download from the following link:

    http://www.pemicro.com/downloads/download_file.cfm?download_id=332" target="_blank">http://www.pemicro.com/downloads/download_...download_id=332


    -Johnny

  • QUOTE (Johnny @ Oct 3 2011, 01:39 PM) [legacy comment]
    There is a 64 bit compatible version of our terminal utility in the P&E Kinetis OSBDM toolkit which you can download from the following link:

    http://www.pemicro.com/downloads/download_file.cfm?download_id=332" target="_blank">http://www.pemicro.com/downloads/download_...download_id=332


    -Johnny


    Is that supposed to be this link - http://www.pemicro.com/downloads/download_file.cfm?download_id=332" target="_blank">http://www.pemicro.com/downloads/download_...download_id=332

    I just tried that (based on another post on this forum) and the problem remains.


  • QUOTE (JoeP @ Oct 3 2011, 01:43 PM) [legacy comment]
    Is that supposed to be this link - http://www.pemicro.com/downloads/download_file.cfm?download_id=332" target="_blank">http://www.pemicro.com/downloads/download_...download_id=332

    I just tried that (based on another post on this forum) and the problem remains.



    Got it working.

    As it turns out I had to update the firmware to 30.07 as per this document - http://www.pemicro.com/osbdm/Installation_and_Operation_of_the_OSBDM.pdf" target="_blank">http://www.pemicro.com/osbdm/Installation_...f_the_OSBDM.pdf

    I guess that means this was a case of RTFM.

    Unclear if this is related to 64 bit or not. Perhaps that was a red herring and I simply got out of sync on the firmware and pc drivers.

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement