Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
USB ColdFire Multilink and MCF5271
Diep V. migrated on Dec 31, 2013 at 11:00 AM
No staff assigned yet

  • Hi 
    I am using MCF5271 to design my board. I'd like to use USB ColdFire Multilink and CF Flasher to load dBUG (dBUG is software bootloader to provide by Frescale) thru BDM to my board. But CF Flasher only support internal flash and external flash of M5271 board. As far as I know, MCF5271 don't have internal Flash.
    Could you suggest me a software which combine with USB ColdFire Multilink to implement that?
    thank you.




    Comments

  • Hi Diep,

    PROGCFZ is the P&E Flash Programmer software:
    http://www.pemicro.com/products/product_viewDetails.cfm?product_id=99" target="_blank">http://www.pemicro.com/products/product_vi...m?product_id=99

    The MCF5271 requires external flash. P&E provides algorithms for thousands of external flash devices. If you're using an external flash that is currently not supported, we can create a custom algorithm for you free of charge.

    Best regards,
    Edison

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement